Motor_PID - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Motor_PID

Version: 2.1.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	HG7881_L9110	L298N
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/HG7881_L9110

Result: PASS

Sketch uses 3420 bytes (10%) of program storage space. Maximum is 32256 bytes.
Global variables use 53 bytes (2%) of dynamic memory, leaving 1995 bytes for local variables. Maximum is 2048 bytes.

examples/L298N

Result: PASS

Sketch uses 3446 bytes (10%) of program storage space. Maximum is 32256 bytes.
Global variables use 53 bytes (2%) of dynamic memory, leaving 1995 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/HG7881_L9110

Result: PASS

Sketch uses 84542 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43520 bytes (16%) of dynamic memory, leaving 226816 bytes for local variables. Maximum is 270336 bytes.

examples/L298N

Result: PASS

Sketch uses 84582 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43524 bytes (16%) of dynamic memory, leaving 226812 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/HG7881_L9110

Result: PASS

Sketch uses 3930 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 66 bytes (1%) of dynamic memory, leaving 6078 bytes for local variables. Maximum is 6144 bytes.

examples/L298N

Result: PASS

Sketch uses 3958 bytes (8%) of program storage space. Maximum is 49152 bytes.
Global variables use 66 bytes (1%) of dynamic memory, leaving 6078 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/HG7881_L9110

Result: PASS

Sketch uses 17460 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3108 bytes (9%) of dynamic memory, leaving 29660 bytes for local variables. Maximum is 32768 bytes.

examples/L298N

Result: PASS

Sketch uses 17500 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3112 bytes (9%) of dynamic memory, leaving 29656 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp: In member function 'void motor::setMotor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:42:32: error: 'analogWrite' was not declared in this scope
     analogWrite(_pwmpin, pwmVal);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:45:68: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 1) : analogWrite(IN1, pwmVal);
                                                                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:50:63: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:55:63: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp: In member function 'void motor::turn_off()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:139:27: error: 'analogWrite' was not declared in this scope
     analogWrite(_pwmpin, 0);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:140:61: error: 'analogWrite' was not declared in this scope
   (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                             ^

examples/HG7881_L9110

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp: In member function 'void motor::setMotor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:42:32: error: 'analogWrite' was not declared in this scope
     analogWrite(_pwmpin, pwmVal);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:45:68: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 1) : analogWrite(IN1, pwmVal);
                                                                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:50:63: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:55:63: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp: In member function 'void motor::turn_off()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:139:27: error: 'analogWrite' was not declared in this scope
     analogWrite(_pwmpin, 0);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:140:61: error: 'analogWrite' was not declared in this scope
   (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                             ^

examples/L298N

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp: In member function 'void motor::setMotor(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:42:32: error: 'analogWrite' was not declared in this scope
     analogWrite(_pwmpin, pwmVal);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:45:68: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 1) : analogWrite(IN1, pwmVal);
                                                                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:50:63: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:55:63: error: 'analogWrite' was not declared in this scope
     (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp: In member function 'void motor::turn_off()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:139:27: error: 'analogWrite' was not declared in this scope
     analogWrite(_pwmpin, 0);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Motor_PID/src/Motor_PID.cpp:140:61: error: 'analogWrite' was not declared in this scope
   (_pwmpin != 0) ? digitalWrite(IN1, 0) : analogWrite(IN1, 0);
                                                             ^