MrMx - AW9523B - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MrMx - AW9523B

Version: 0.9.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	AW9523B_example_DL1414_test	AW9523B_example_led_fade
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/AW9523B_example_DL1414_test

Result: PASS

Sketch uses 4240 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 437 bytes (21%) of dynamic memory, leaving 1611 bytes for local variables. Maximum is 2048 bytes.

examples/AW9523B_example_led_fade

Result: PASS

Sketch uses 4198 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 441 bytes (21%) of dynamic memory, leaving 1607 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/AW9523B_example_DL1414_test

Result: PASS

Sketch uses 82180 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44228 bytes (16%) of dynamic memory, leaving 226108 bytes for local variables. Maximum is 270336 bytes.

examples/AW9523B_example_led_fade

Result: PASS

Sketch uses 82100 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.cpp:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t AW9523B::readI2C(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/AW9523B_example_DL1414_test

Result: PASS

Sketch uses 5223 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 491 bytes (7%) of dynamic memory, leaving 5653 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.cpp:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t AW9523B::readI2C(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/AW9523B_example_led_fade

Result: PASS

Sketch uses 5173 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 495 bytes (8%) of dynamic memory, leaving 5649 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.cpp:14:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t AW9523B::readI2C(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/AW9523B_example_DL1414_test

Result: PASS

Sketch uses 14200 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3576 bytes (10%) of dynamic memory, leaving 29192 bytes for local variables. Maximum is 32768 bytes.

examples/AW9523B_example_led_fade

Result: PASS

Sketch uses 14120 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:53:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:35,
                 from /tmp/arduino-sketch-61D71F9FC08CDEACF60BF74C908E5048/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected identifier before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected '}' before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected unqualified-id before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
In file included from /tmp/arduino-testlib842855041/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:42:1: error: expected declaration before '}' token
 };
 ^

examples/AW9523B_example_DL1414_test

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:53:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:35,
                 from /tmp/arduino-sketch-A5CE0A5E2F86D81A8B07C268A5B77973/sketch/AW9523B_example_DL1414_test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected identifier before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected '}' before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected unqualified-id before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/examples/AW9523B_example_DL1414_test/AW9523B_example_DL1414_test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:42:1: error: expected declaration before '}' token
 };
 ^

examples/AW9523B_example_led_fade

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:53:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:35,
                 from /tmp/arduino-sketch-9C9E0CE987B8452247BB9E3B587B3432/sketch/AW9523B_example_led_fade.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected identifier before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected '}' before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal-gpio.h:39:27: error: expected unqualified-id before numeric constant
 #define OPEN_DRAIN        0x10
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:40:5: note: in expansion of macro 'OPEN_DRAIN'
     OPEN_DRAIN = 0x00, // Port 0 open drain mode
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/examples/AW9523B_example_led_fade/AW9523B_example_led_fade.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MrMx_-_AW9523B/src/AW9523B.h:42:1: error: expected declaration before '}' token
 };
 ^