Multi_BitBang - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Multi_BitBang

Version: 1.0.0
More details

Compatibility matrix

scan_buses

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/scan_buses

Result: PASS

Sketch uses 3916 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 402 bytes (19%) of dynamic memory, leaving 1646 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/scan_buses

Result: PASS

Sketch uses 80048 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43516 bytes (16%) of dynamic memory, leaving 226820 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp: In function 'uint8_t getPinInfo(uint8_t, volatile uint8_t**, volatile uint8_t**, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:48:28: error: 'PINE' was not declared in this scope
       *iPort = (bInput) ? &PINE : &PORTE;
                            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:48:28: note: suggested alternative: 'PIN0'
       *iPort = (bInput) ? &PINE : &PORTE;
                            ^~~~
                            PIN0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:49:16: error: 'DDRE' was not declared in this scope
       *iDDR = &DDRE;
                ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:49:16: note: suggested alternative: 'DDRD'
       *iDDR = &DDRE;
                ^~~~
                DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:54:28: error: 'PINF' was not declared in this scope
       *iPort = (bInput) ? &PINF : &PORTF;
                            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:54:28: note: suggested alternative: 'PIN0'
       *iPort = (bInput) ? &PINF : &PORTF;
                            ^~~~
                            PIN0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:55:16: error: 'DDRF' was not declared in this scope
       *iDDR = &DDRF;
                ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:55:16: note: suggested alternative: 'DDRD'
       *iDDR = &DDRF;
                ^~~~
                DDRD

examples/scan_buses

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp: In function 'uint8_t getPinInfo(uint8_t, volatile uint8_t**, volatile uint8_t**, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:48:28: error: 'PINE' was not declared in this scope
       *iPort = (bInput) ? &PINE : &PORTE;
                            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:48:28: note: suggested alternative: 'PIN0'
       *iPort = (bInput) ? &PINE : &PORTE;
                            ^~~~
                            PIN0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:49:16: error: 'DDRE' was not declared in this scope
       *iDDR = &DDRE;
                ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:49:16: note: suggested alternative: 'DDRD'
       *iDDR = &DDRE;
                ^~~~
                DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:54:28: error: 'PINF' was not declared in this scope
       *iPort = (bInput) ? &PINF : &PORTF;
                            ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:54:28: note: suggested alternative: 'PIN0'
       *iPort = (bInput) ? &PINF : &PORTF;
                            ^~~~
                            PIN0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:55:16: error: 'DDRF' was not declared in this scope
       *iDDR = &DDRF;
                ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multi_BitBang/src/Multi_BitBang.cpp:55:16: note: suggested alternative: 'DDRD'
       *iDDR = &DDRF;
                ^~~~
                DDRD

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/scan_buses

Result: PASS

Sketch uses 13744 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3072 bytes (9%) of dynamic memory, leaving 29696 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198290 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13096 bytes (3%) of dynamic memory, leaving 314584 bytes for local variables. Maximum is 327680 bytes.

examples/scan_buses

Result: PASS

Sketch uses 205938 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13496 bytes (4%) of dynamic memory, leaving 314184 bytes for local variables. Maximum is 327680 bytes.