Multiplex - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Multiplex

Version: 0.2.3
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Multiplex_enable_stream	Multiplex_hardwareSerial	Multiplex_softwareSerial	Multiplex_test
arduino:avr:uno 1.8.4	Yes	PASS	PASS	FAIL	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	FAIL	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	FAIL	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	FAIL	FAIL	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	FAIL	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/Multiplex_enable_stream

Result: PASS

Sketch uses 2870 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 414 bytes (20%) of dynamic memory, leaving 1634 bytes for local variables. Maximum is 2048 bytes.

examples/Multiplex_hardwareSerial

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:27:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200);
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:27:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200);
   ^~~~~~~
   Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:28:3: error: 'Serial2' was not declared in this scope
   Serial2.begin(115200);
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:28:3: note: suggested alternative: 'Serial'
   Serial2.begin(115200);
   ^~~~~~~
   Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:29:3: error: 'Serial3' was not declared in this scope
   Serial3.begin(115200);
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:29:3: note: suggested alternative: 'Serial'
   Serial3.begin(115200);
   ^~~~~~~
   Serial

examples/Multiplex_softwareSerial

Result: PASS

Sketch uses 4364 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 643 bytes (31%) of dynamic memory, leaving 1405 bytes for local variables. Maximum is 2048 bytes.

examples/Multiplex_test

Result: PASS

Sketch uses 3112 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 426 bytes (20%) of dynamic memory, leaving 1622 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/Multiplex_enable_stream

Result: PASS

Sketch uses 79552 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43480 bytes (16%) of dynamic memory, leaving 226856 bytes for local variables. Maximum is 270336 bytes.

examples/Multiplex_hardwareSerial

Result: PASS

Sketch uses 79506 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43480 bytes (16%) of dynamic memory, leaving 226856 bytes for local variables. Maximum is 270336 bytes.

examples/Multiplex_softwareSerial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library

examples/Multiplex_test

Result: PASS

Sketch uses 79816 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43480 bytes (16%) of dynamic memory, leaving 226856 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/Multiplex_enable_stream

Result: PASS

Sketch uses 3959 bytes (8%) of program storage space. Maximum is 49152 bytes.
Global variables use 195 bytes (3%) of dynamic memory, leaving 5949 bytes for local variables. Maximum is 6144 bytes.

examples/Multiplex_hardwareSerial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:28:3: error: 'Serial2' was not declared in this scope
   Serial2.begin(115200);
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:28:3: note: suggested alternative: 'Serial1'
   Serial2.begin(115200);
   ^~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:29:3: error: 'Serial3' was not declared in this scope
   Serial3.begin(115200);
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:29:3: note: suggested alternative: 'Serial1'
   Serial3.begin(115200);
   ^~~~~~~
   Serial1

examples/Multiplex_softwareSerial

Result: PASS

Sketch uses 5609 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 548 bytes (8%) of dynamic memory, leaving 5596 bytes for local variables. Maximum is 6144 bytes.

examples/Multiplex_test

Result: PASS

Sketch uses 4198 bytes (8%) of program storage space. Maximum is 49152 bytes.
Global variables use 195 bytes (3%) of dynamic memory, leaving 5949 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/Multiplex_enable_stream

Result: PASS

Sketch uses 13348 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3028 bytes (9%) of dynamic memory, leaving 29740 bytes for local variables. Maximum is 32768 bytes.

examples/Multiplex_hardwareSerial

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:29:3: error: 'Serial3' was not declared in this scope
   Serial3.begin(115200);
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:29:3: note: suggested alternative: 'Serial_'
   Serial3.begin(115200);
   ^~~~~~~
   Serial_

examples/Multiplex_softwareSerial

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

examples/Multiplex_test

Result: PASS

Sketch uses 13672 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3028 bytes (9%) of dynamic memory, leaving 29740 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 197832 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13092 bytes (3%) of dynamic memory, leaving 314588 bytes for local variables. Maximum is 327680 bytes.

examples/Multiplex_enable_stream

Result: PASS

Sketch uses 205538 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.

examples/Multiplex_hardwareSerial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Multiplex/examples/Multiplex_hardwareSerial/Multiplex_hardwareSerial.ino:29:3: error: 'Serial3' was not declared in this scope
   Serial3.begin(115200);
   ^

examples/Multiplex_softwareSerial

Result: PASS

Sketch uses 263626 bytes (20%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14624 bytes (4%) of dynamic memory, leaving 313056 bytes for local variables. Maximum is 327680 bytes.

examples/Multiplex_test

Result: PASS

Sketch uses 205918 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.