This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.0
More details
| Board | Claims compatibility | Inclusion | test_pro_micro |
tilt_sensor |
IR_emitter |
color_distance_sensor |
color_sensor |
distance_sensor |
|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: PASS
Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes. Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/tmp/ccQkyCYt.ltrans0.ltrans.o: In function `IRCallback(unsigned int)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/IR_emitter/IR_emitter.ino:62: undefined reference to `IRsend::sendLegoPowerFunctions(unsigned int, bool)' collect2: error: ld returned 1 exit status
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp: In function 'void handleDistSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:85:34: error: 'class VL6180X' has no member named 'readRangeStatus'; did you mean 'readRangeSingle'?
uint8_t status = dist_sensor.readRangeStatus();
^~~~~~~~~~~~~~~
readRangeSingle
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:87:19: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:20: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:20: note: suggested alternative: 'INTF0'
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
INTF0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:154:37: error: 'class VL6180X' has no member named 'readRangeStatus'; did you mean 'readRangeSingle'?
uint8_t status = distSensor.readRangeStatus();
^~~~~~~~~~~~~~~
readRangeSingle
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:156:23: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:24: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:24: note: suggested alternative: 'INTF0'
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
INTF0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:49:15: error: 'class TiltSensor' has no member named 'Process'; did you mean 'process'?
myOwnTilt.Process();
^~~~~~~
process
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'bool BaseSensor::isConnected()' is inaccessible within this context
if (myOwnTilt.isConnected()) {
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/TiltSensor.h:23:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/BaseSensor.h:45:10: note: declared here
bool isConnected();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'BaseSensor' is not an accessible base of 'TiltSensor'
if (myOwnTilt.isConnected()) {
^
Result: PASS
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IRremote/src/IRremote.hpp:215:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/IR_emitter/IR_emitter.ino:43:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IRremote/src/IRremoteInt.h:63:2: error: #error F_CPU not defined, please define it for your board in IRremoteInt.h
#error F_CPU not defined, please define it for your board in IRremoteInt.h
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IRremote/src/IRremote.hpp:216:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/IR_emitter/IR_emitter.ino:43:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IRremote/src/private/IRTimer.hpp:1129:2: error: #error PWM generation by hardware not implemented for MBED
#error PWM generation by hardware not implemented for MBED
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp: In function 'void handleDistSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:85:34: error: 'class VL6180X' has no member named 'readRangeStatus'; did you mean 'readRangeSingle'?
uint8_t status = dist_sensor.readRangeStatus();
^~~~~~~~~~~~~~~
readRangeSingle
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:87:19: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:87:19: note: suggested alternative: 'PICO_ERROR_NONE'
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
PICO_ERROR_NONE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:5: error: 'EIFR' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:5: note: suggested alternative: 'DIR'
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
DIR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:20: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp: In function 'void handleRGBSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:5: error: 'PCIFR' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:21: error: 'PCIF0' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:72:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:72:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:197:5: error: 'cli' was not declared in this scope
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:198:5: error: 'PCICR' was not declared in this scope
PCICR |= 0b00000001; // enable PORTB pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:199:5: error: 'PCMSK0' was not declared in this scope
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:199:5: note: suggested alternative: 'PWM_0'
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^~~~~~
PWM_0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:200:5: error: 'sei' was not declared in this scope
sei(); // Enable all interrupts
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:63:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:63:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:135:5: error: 'cli' was not declared in this scope
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:136:5: error: 'PCICR' was not declared in this scope
PCICR |= 0b00000001; // enable PORTB pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:137:5: error: 'PCMSK0' was not declared in this scope
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:137:5: note: suggested alternative: 'PWM_0'
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^~~~~~
PWM_0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:138:5: error: 'sei' was not declared in this scope
sei(); // Enable all interrupts
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:9: error: 'PCIFR' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:30: error: 'PCIF0' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:140:5: error: 'cli' was not declared in this scope
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:142:5: error: 'sei' was not declared in this scope
sei(); // Enable all interrupts
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:154:37: error: 'class VL6180X' has no member named 'readRangeStatus'; did you mean 'readRangeSingle'?
uint8_t status = distSensor.readRangeStatus();
^~~~~~~~~~~~~~~
readRangeSingle
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:156:23: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:156:23: note: suggested alternative: 'PICO_ERROR_NONE'
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
PICO_ERROR_NONE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:9: error: 'EIFR' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:9: note: suggested alternative: 'DIR'
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
DIR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:24: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:49:15: error: 'class TiltSensor' has no member named 'Process'; did you mean 'process'?
myOwnTilt.Process();
^~~~~~~
process
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'bool BaseSensor::isConnected()' is inaccessible within this context
if (myOwnTilt.isConnected()) {
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/TiltSensor.h:23:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/BaseSensor.h:45:10: note: declared here
bool isConnected();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'BaseSensor' is not an accessible base of 'TiltSensor'
if (myOwnTilt.isConnected()) {
^
Result: PASS
Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes. Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/tmp/ccLTERJo.ltrans0.ltrans.o: In function `IRCallback(unsigned int)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/IR_emitter/IR_emitter.ino:62: undefined reference to `IRsend::sendLegoPowerFunctions(unsigned int, bool)' collect2: error: ld returned 1 exit status
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp: In function 'void handleDistSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:85:34: error: 'class VL6180X' has no member named 'readRangeStatus'; did you mean 'readRangeSingle'?
uint8_t status = dist_sensor.readRangeStatus();
^~~~~~~~~~~~~~~
readRangeSingle
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:87:19: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:5: error: 'EIFR' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:5: note: suggested alternative: 'EOF'
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
EOF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:20: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp: In function 'void handleRGBSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:5: error: 'PCIFR' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:21: error: 'PCIF0' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:21: note: suggested alternative: 'PIN0'
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
PIN0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void PCINT0_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:50:24: error: 'PINB' was not declared in this scope
#define tstPin(b) ((PINB & (1 << (b))) != 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:74:10: note: in expansion of macro 'tstPin'
if (!tstPin(RGB_SENSOR_INTERRUPT_PORT))
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:50:24: note: suggested alternative: 'PIN0'
#define tstPin(b) ((PINB & (1 << (b))) != 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:74:10: note: in expansion of macro 'tstPin'
if (!tstPin(RGB_SENSOR_INTERRUPT_PORT))
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:47:38: error: 'PB4' was not declared in this scope
#define RGB_SENSOR_INTERRUPT_PORT PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:50:38: note: in definition of macro 'tstPin'
#define tstPin(b) ((PINB & (1 << (b))) != 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:74:17: note: in expansion of macro 'RGB_SENSOR_INTERRUPT_PORT'
if (!tstPin(RGB_SENSOR_INTERRUPT_PORT))
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:47:38: note: suggested alternative: 'PB'
#define RGB_SENSOR_INTERRUPT_PORT PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:50:38: note: in definition of macro 'tstPin'
#define tstPin(b) ((PINB & (1 << (b))) != 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:74:17: note: in expansion of macro 'RGB_SENSOR_INTERRUPT_PORT'
if (!tstPin(RGB_SENSOR_INTERRUPT_PORT))
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:198:5: error: 'PCICR' was not declared in this scope
PCICR |= 0b00000001; // enable PORTB pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:199:5: error: 'PCMSK0' was not declared in this scope
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void PCINT0_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:43:49: error: 'PINB' was not declared in this scope
#define tstPin(b) ((PINB & (1 << (b))) != 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:65:10: note: in expansion of macro 'tstPin'
if (!tstPin(RGB_SENSOR_INTERRUPT_PORT))
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:43:49: note: suggested alternative: 'PIN0'
#define tstPin(b) ((PINB & (1 << (b))) != 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:65:10: note: in expansion of macro 'tstPin'
if (!tstPin(RGB_SENSOR_INTERRUPT_PORT))
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:40:38: error: 'PB4' was not declared in this scope
#define RGB_SENSOR_INTERRUPT_PORT PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:43:63: note: in definition of macro 'tstPin'
#define tstPin(b) ((PINB & (1 << (b))) != 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:65:17: note: in expansion of macro 'RGB_SENSOR_INTERRUPT_PORT'
if (!tstPin(RGB_SENSOR_INTERRUPT_PORT))
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:40:38: note: suggested alternative: 'PB'
#define RGB_SENSOR_INTERRUPT_PORT PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:43:63: note: in definition of macro 'tstPin'
#define tstPin(b) ((PINB & (1 << (b))) != 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:65:17: note: in expansion of macro 'RGB_SENSOR_INTERRUPT_PORT'
if (!tstPin(RGB_SENSOR_INTERRUPT_PORT))
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:136:5: error: 'PCICR' was not declared in this scope
PCICR |= 0b00000001; // enable PORTB pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:137:5: error: 'PCMSK0' was not declared in this scope
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:9: error: 'PCIFR' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:30: error: 'PCIF0' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:30: note: suggested alternative: 'PIN0'
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
PIN0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:154:37: error: 'class VL6180X' has no member named 'readRangeStatus'; did you mean 'readRangeSingle'?
uint8_t status = distSensor.readRangeStatus();
^~~~~~~~~~~~~~~
readRangeSingle
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:156:23: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:9: error: 'EIFR' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:9: note: suggested alternative: 'EOF'
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
EOF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:24: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:49:15: error: 'class TiltSensor' has no member named 'Process'; did you mean 'process'?
myOwnTilt.Process();
^~~~~~~
process
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'bool BaseSensor::isConnected()' is inaccessible within this context
if (myOwnTilt.isConnected()) {
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/TiltSensor.h:23:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/BaseSensor.h:45:10: note: declared here
bool isConnected();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'BaseSensor' is not an accessible base of 'TiltSensor'
if (myOwnTilt.isConnected()) {
^
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IRremote/src/IRremote.hpp:216:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/IR_emitter/IR_emitter.ino:43:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IRremote/src/private/IRTimer.hpp:1046:2: error: #error PWM generation by hardware not implemented for SAMD
#error PWM generation by hardware not implemented for SAMD
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp: In function 'void handleDistSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:85:34: error: 'class VL6180X' has no member named 'readRangeStatus'; did you mean 'readRangeSingle'?
uint8_t status = dist_sensor.readRangeStatus();
^~~~~~~~~~~~~~~
readRangeSingle
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:87:19: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:5: error: 'EIFR' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:5: note: suggested alternative: 'EIC'
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
EIC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:20: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp: In function 'void handleRGBSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:5: error: 'PCIFR' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:21: error: 'PCIF0' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:72:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:72:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:197:5: error: 'cli' was not declared in this scope
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:197:5: note: suggested alternative: 'Gclk'
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:198:5: error: 'PCICR' was not declared in this scope
PCICR |= 0b00000001; // enable PORTB pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:199:5: error: 'PCMSK0' was not declared in this scope
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:200:5: error: 'sei' was not declared in this scope
sei(); // Enable all interrupts
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:63:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:63:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:135:5: error: 'cli' was not declared in this scope
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:135:5: note: suggested alternative: 'Gclk'
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:136:5: error: 'PCICR' was not declared in this scope
PCICR |= 0b00000001; // enable PORTB pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:137:5: error: 'PCMSK0' was not declared in this scope
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:138:5: error: 'sei' was not declared in this scope
sei(); // Enable all interrupts
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:9: error: 'PCIFR' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:30: error: 'PCIF0' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:140:5: error: 'cli' was not declared in this scope
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:140:5: note: suggested alternative: 'Gclk'
cli(); // Disable all interrupts: Avoid first and not wanted trigger of the interrupt
^~~
Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:142:5: error: 'sei' was not declared in this scope
sei(); // Enable all interrupts
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:154:37: error: 'class VL6180X' has no member named 'readRangeStatus'; did you mean 'readRangeSingle'?
uint8_t status = distSensor.readRangeStatus();
^~~~~~~~~~~~~~~
readRangeSingle
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:156:23: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:9: error: 'EIFR' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:9: note: suggested alternative: 'EIC'
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~
EIC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:24: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, INPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_TX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: note: suggested alternative: 'LED_BUILTIN'
pinMode(LED_BUILTIN_RX, OUTPUT);
^~~~~~~~~~~~~~
LED_BUILTIN
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:49:15: error: 'class TiltSensor' has no member named 'Process'; did you mean 'process'?
myOwnTilt.Process();
^~~~~~~
process
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'bool BaseSensor::isConnected()' is inaccessible within this context
if (myOwnTilt.isConnected()) {
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/TiltSensor.h:23:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/BaseSensor.h:45:10: note: declared here
bool isConnected();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'BaseSensor' is not an accessible base of 'TiltSensor'
if (myOwnTilt.isConnected()) {
^
Result: PASS
Sketch uses 201014 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13208 bytes (4%) of dynamic memory, leaving 314472 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/tmp/arduino-sketch-587F869DD1EE641B7EAA9CC8D2E5274F/sketch/IR_emitter.ino.cpp.o:(.literal._Z10IRCallbackt+0x4): undefined reference to `IRsend::sendLegoPowerFunctions(unsigned short, bool)' /tmp/arduino-sketch-587F869DD1EE641B7EAA9CC8D2E5274F/sketch/IR_emitter.ino.cpp.o: In function `IRCallback(unsigned short)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IRremote/src/ir_Dish.hpp:42: undefined reference to `IRsend::sendLegoPowerFunctions(unsigned short, bool)' collect2: error: ld returned 1 exit status
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp: In function 'void handleDistSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:85:34: error: 'class VL6180X' has no member named 'readRangeStatus'
uint8_t status = dist_sensor.readRangeStatus();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:87:19: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:5: error: 'EIFR' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/distance_sensor.hpp:109:20: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp: In function 'void handleRGBSensorData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:5: error: 'PCIFR' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/rgb_sensor.hpp:99:21: error: 'PCIF0' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:72:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:72:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:198:5: error: 'PCICR' was not declared in this scope
PCICR |= 0b00000001; // enable PORTB pin change interrupt
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:199:5: error: 'PCMSK0' was not declared in this scope
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:236:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:237:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:243:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_distance_sensor/color_distance_sensor.ino:244:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:63:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:63:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT0_vect) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:136:5: error: 'PCICR' was not declared in this scope
PCICR |= 0b00000001; // enable PORTB pin change interrupt
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:137:5: error: 'PCMSK0' was not declared in this scope
PCMSK0 |= 0b00010000; // enable PB4, PCINT4, pin 8
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:9: error: 'PCIFR' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:219:30: error: 'PCIF0' was not declared in this scope
PCIFR &= ~(1 << PCIF0); // clear PC interrupt flag in case of bounce
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:229:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:230:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:236:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/color_sensor/color_sensor.ino:237:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^
Multiple libraries were found for "Adafruit_TCS34725.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_TCS34725
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:154:37: error: 'class VL6180X' has no member named 'readRangeStatus'
uint8_t status = distSensor.readRangeStatus();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:156:23: error: 'VL6180X_ERROR_NONE' was not declared in this scope
if (status == VL6180X_ERROR_NONE) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:9: error: 'EIFR' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:177:24: error: 'INTF6' was not declared in this scope
EIFR &= ~(1 << INTF6); // clear interrupt flag in case of bounce
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:189:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:190:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:196:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/distance_sensor/distance_sensor.ino:197:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:94:21: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, INPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:95:21: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, INPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:101:17: error: 'LED_BUILTIN_TX' was not declared in this scope
pinMode(LED_BUILTIN_TX, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/test_pro_micro/test_pro_micro.ino:102:17: error: 'LED_BUILTIN_RX' was not declared in this scope
pinMode(LED_BUILTIN_RX, OUTPUT);
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:49:15: error: 'class TiltSensor' has no member named 'Process'
myOwnTilt.Process();
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/TiltSensor.h:23:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/src/BaseSensor.h:45:10: error: 'bool BaseSensor::isConnected()' is inaccessible
bool isConnected();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: within this context
if (myOwnTilt.isConnected()) {
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MyOwnBricks/examples/tilt_sensor/tilt_sensor.ino:51:31: error: 'BaseSensor' is not an accessible base of 'TiltSensor'