This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 3.0.2
More details
| Board | Claims compatibility | Inclusion | Basic_RX_ESP32 |
Basic_TX |
IRQ_RX |
Test_TX |
TwoWayCom_HardwareBased_RX |
Basic_TX_2Pin |
Basic_TX_ATtiny84 |
MultiplePacketSizes_RX |
SplitDataAcrossMultiplePackets_RX |
TwoWayCom_HardwareBased_TX |
Test_RX |
Basic_RX |
Basic_RX_2Pin |
Basic_RX_ESP8266 |
Basic_TX_ATtiny85 |
IRQ_TX |
TwoWayCom_SoftwareBased_RX |
TwoWayCom_SoftwareBased_TX |
ChannelScanner |
MultiplePacketSizes_TX |
Sensor_RX |
Sensor_TX_ATtiny85_2Pin |
SplitDataAcrossMultiplePackets_TX |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | FAIL | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | FAIL | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | FAIL | PASS |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5172 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 289 bytes (14%) of dynamic memory, leaving 1759 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5162 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 288 bytes (14%) of dynamic memory, leaving 1760 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino:48:75: error: no matching function for call to 'SPIClass::begin(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
SPI.begin(PIN_RADIO_SCK, PIN_RADIO_MISO, PIN_RADIO_MOSI, PIN_RADIO_CSN);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SPI/src/SPI.h:159:15: note: candidate: static void SPIClass::begin()
static void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SPI/src/SPI.h:159:15: note: candidate expects 0 arguments, 4 provided
Result: PASS
Sketch uses 5308 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 381 bytes (18%) of dynamic memory, leaving 1667 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3640 bytes (11%) of program storage space. Maximum is 32256 bytes. Global variables use 289 bytes (14%) of dynamic memory, leaving 1759 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3630 bytes (11%) of program storage space. Maximum is 32256 bytes. Global variables use 288 bytes (14%) of dynamic memory, leaving 1760 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2362 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 46 bytes (2%) of dynamic memory, leaving 2002 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2362 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 46 bytes (2%) of dynamic memory, leaving 2002 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4970 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 350 bytes (17%) of dynamic memory, leaving 1698 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3670 bytes (11%) of program storage space. Maximum is 32256 bytes. Global variables use 261 bytes (12%) of dynamic memory, leaving 1787 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3928 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 287 bytes (14%) of dynamic memory, leaving 1761 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5100 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 378 bytes (18%) of dynamic memory, leaving 1670 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5862 bytes (18%) of program storage space. Maximum is 32256 bytes. Global variables use 340 bytes (16%) of dynamic memory, leaving 1708 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 10612 bytes (32%) of program storage space. Maximum is 32256 bytes. Global variables use 556 bytes (27%) of dynamic memory, leaving 1492 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino: In function 'void sleep(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:329:13: error: 'WDTCR' was not declared in this scope
WDTCR = _BV(WDIE) | _BV(WDP3) | _BV(WDP0); // Enable watchdog and set 8 second interrupt time.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:329:13: note: suggested alternative: 'WDTCSR'
WDTCR = _BV(WDIE) | _BV(WDP3) | _BV(WDP0); // Enable watchdog and set 8 second interrupt time.
^~~~~
WDTCSR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:334:13: error: 'WDTCR' was not declared in this scope
WDTCR = _BV(WDIE) | _BV(WDP2) | _BV(WDP1); // 1 second interrupt time.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:334:13: note: suggested alternative: 'WDTCSR'
WDTCR = _BV(WDIE) | _BV(WDP2) | _BV(WDP1); // 1 second interrupt time.
^~~~~
WDTCSR
Result: PASS
Sketch uses 5736 bytes (17%) of program storage space. Maximum is 32256 bytes. Global variables use 410 bytes (20%) of dynamic memory, leaving 1638 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6254 bytes (19%) of program storage space. Maximum is 32256 bytes. Global variables use 426 bytes (20%) of dynamic memory, leaving 1622 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 11202 bytes (34%) of program storage space. Maximum is 32256 bytes. Global variables use 842 bytes (41%) of dynamic memory, leaving 1206 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 15254 bytes (47%) of program storage space. Maximum is 32256 bytes. Global variables use 969 bytes (47%) of dynamic memory, leaving 1079 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5188 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 324 bytes (15%) of dynamic memory, leaving 1724 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5610 bytes (17%) of program storage space. Maximum is 32256 bytes. Global variables use 396 bytes (19%) of dynamic memory, leaving 1652 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5478 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 322 bytes (15%) of dynamic memory, leaving 1726 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5478 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 322 bytes (15%) of dynamic memory, leaving 1726 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 80722 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43616 bytes (16%) of dynamic memory, leaving 226720 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83180 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43672 bytes (16%) of dynamic memory, leaving 226664 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_2Pin/Basic_RX_2Pin.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_2Pin/Basic_RX_2Pin.ino:36:17: error: 'class NRFLite' has no member named 'initTwoPin'; did you mean 'initRadio'?
if (!_radio.initTwoPin(RADIO_ID, PIN_RADIO_MOMI, PIN_RADIO_SCK)) // Note usage of 'initTwoPin' rather than 'init'.
^~~~~~~~~~
initRadio
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino:48:75: error: no matching function for call to 'arduino::MbedSPI::begin(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
SPI.begin(PIN_RADIO_SCK, PIN_RADIO_MISO, PIN_RADIO_MOSI, PIN_RADIO_CSN);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:47:18: note: candidate: virtual void arduino::MbedSPI::begin()
virtual void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:47:18: note: candidate expects 0 arguments, 4 provided
Result: PASS
Sketch uses 83352 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43668 bytes (16%) of dynamic memory, leaving 226668 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82516 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43672 bytes (16%) of dynamic memory, leaving 226664 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_TX_2Pin/Basic_TX_2Pin.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_TX_2Pin/Basic_TX_2Pin.ino:39:17: error: 'class NRFLite' has no member named 'initTwoPin'; did you mean 'initRadio'?
if (!_radio.initTwoPin(RADIO_ID, PIN_RADIO_MOMI, PIN_RADIO_SCK)) // Note usage of 'initTwoPin' rather than 'init'.
^~~~~~~~~~
initRadio
Result: PASS
Sketch uses 82376 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43672 bytes (16%) of dynamic memory, leaving 226664 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82376 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43672 bytes (16%) of dynamic memory, leaving 226664 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82916 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43660 bytes (16%) of dynamic memory, leaving 226676 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83726 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43912 bytes (16%) of dynamic memory, leaving 226424 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83732 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43916 bytes (16%) of dynamic memory, leaving 226420 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82966 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43692 bytes (16%) of dynamic memory, leaving 226644 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83486 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43692 bytes (16%) of dynamic memory, leaving 226644 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_RX/Sensor_RX.ino:68:16: error: declaration of 'ChangeType NewSettingsPacket::ChangeType' [-fpermissive]
ChangeType ChangeType;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_RX/Sensor_RX.ino:57:6: error: changes meaning of 'ChangeType' from 'enum ChangeType' [-fpermissive]
enum ChangeType
^~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:34:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 83520 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43748 bytes (16%) of dynamic memory, leaving 226588 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83716 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43664 bytes (16%) of dynamic memory, leaving 226672 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 90564 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44032 bytes (16%) of dynamic memory, leaving 226304 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 92818 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44048 bytes (16%) of dynamic memory, leaving 226288 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83248 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43660 bytes (16%) of dynamic memory, leaving 226676 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83558 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43668 bytes (16%) of dynamic memory, leaving 226668 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83480 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43664 bytes (16%) of dynamic memory, leaving 226672 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83484 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43664 bytes (16%) of dynamic memory, leaving 226672 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 3246 bytes (6%) of program storage space. Maximum is 49152 bytes. Global variables use 40 bytes (0%) of dynamic memory, leaving 6104 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 7863 bytes (15%) of program storage space. Maximum is 49152 bytes. Global variables use 297 bytes (4%) of dynamic memory, leaving 5847 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 7851 bytes (15%) of program storage space. Maximum is 49152 bytes. Global variables use 297 bytes (4%) of dynamic memory, leaving 5847 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino:48:75: error: no matching function for call to 'SPIClassMegaAVR::begin(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
SPI.begin(PIN_RADIO_SCK, PIN_RADIO_MISO, PIN_RADIO_MOSI, PIN_RADIO_CSN);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SPI/src/SPI.h:168:8: note: candidate: virtual void SPIClassMegaAVR::begin()
void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/SPI/src/SPI.h:168:8: note: candidate expects 0 arguments, 4 provided
Result: PASS
Sketch uses 7997 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 297 bytes (4%) of dynamic memory, leaving 5847 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 6881 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 297 bytes (4%) of dynamic memory, leaving 5847 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 6869 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 297 bytes (4%) of dynamic memory, leaving 5847 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 5186 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 142 bytes (2%) of dynamic memory, leaving 6002 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 5186 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 142 bytes (2%) of dynamic memory, leaving 6002 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 7681 bytes (15%) of program storage space. Maximum is 49152 bytes. Global variables use 288 bytes (4%) of dynamic memory, leaving 5856 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 7321 bytes (14%) of program storage space. Maximum is 49152 bytes. Global variables use 481 bytes (7%) of dynamic memory, leaving 5663 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 7583 bytes (15%) of program storage space. Maximum is 49152 bytes. Global variables use 487 bytes (7%) of dynamic memory, leaving 5657 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 7718 bytes (15%) of program storage space. Maximum is 49152 bytes. Global variables use 322 bytes (5%) of dynamic memory, leaving 5822 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8364 bytes (17%) of program storage space. Maximum is 49152 bytes. Global variables use 326 bytes (5%) of dynamic memory, leaving 5818 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13658 bytes (27%) of program storage space. Maximum is 49152 bytes. Global variables use 548 bytes (8%) of dynamic memory, leaving 5596 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-A71D6DFE0CCEF8085F171893D83715EB/sketch/Sensor_TX_ATtiny85_2Pin.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:103:23: error: 'NVM_STATUS' was not declared in this scope
#define eepromBegin() eeprom_busy_wait(); noInterrupts() // Details on https://youtu.be/_yOcKwu7mQA
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:115:5: note: in expansion of macro 'eepromBegin'
eepromBegin();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:103:23: note: suggested alternative: 'GET_STATUS'
#define eepromBegin() eeprom_busy_wait(); noInterrupts() // Details on https://youtu.be/_yOcKwu7mQA
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:115:5: note: in expansion of macro 'eepromBegin'
eepromBegin();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:103:23: error: 'NVM_NVMBUSY_bp' was not declared in this scope
#define eepromBegin() eeprom_busy_wait(); noInterrupts() // Details on https://youtu.be/_yOcKwu7mQA
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:115:5: note: in expansion of macro 'eepromBegin'
eepromBegin();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:103:23: note: suggested alternative: 'NVMCTRL_FBUSY_bp'
#define eepromBegin() eeprom_busy_wait(); noInterrupts() // Details on https://youtu.be/_yOcKwu7mQA
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:115:5: note: in expansion of macro 'eepromBegin'
eepromBegin();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino: In function 'float getVcc()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:227:5: error: 'ADMUX' was not declared in this scope
ADMUX = _BV(MUX3) | _BV(MUX2); // Select internal 1.1V reference for measurement.
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-A71D6DFE0CCEF8085F171893D83715EB/sketch/Sensor_TX_ATtiny85_2Pin.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:227:17: error: 'MUX3' was not declared in this scope
ADMUX = _BV(MUX3) | _BV(MUX2); // Select internal 1.1V reference for measurement.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:227:29: error: 'MUX2' was not declared in this scope
ADMUX = _BV(MUX3) | _BV(MUX2); // Select internal 1.1V reference for measurement.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:229:5: error: 'ADCSRA' was not declared in this scope
ADCSRA |= _BV(ADSC); // Start measuring.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:229:5: note: suggested alternative: 'ADC_t'
ADCSRA |= _BV(ADSC); // Start measuring.
^~~~~~
ADC_t
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-A71D6DFE0CCEF8085F171893D83715EB/sketch/Sensor_TX_ATtiny85_2Pin.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:229:19: error: 'ADSC' was not declared in this scope
ADCSRA |= _BV(ADSC); // Start measuring.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:229:19: note: suggested alternative: 'DDRC'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:231:27: error: 'ADC' was not declared in this scope
uint16_t adcReading = ADC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:231:27: note: suggested alternative: 'ADC0'
uint16_t adcReading = ADC;
^~~
ADC0
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-A71D6DFE0CCEF8085F171893D83715EB/sketch/Sensor_TX_ATtiny85_2Pin.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino: In function 'void saveSettings()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:103:23: error: 'NVM_STATUS' was not declared in this scope
#define eepromBegin() eeprom_busy_wait(); noInterrupts() // Details on https://youtu.be/_yOcKwu7mQA
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:279:5: note: in expansion of macro 'eepromBegin'
eepromBegin();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:103:23: note: suggested alternative: 'GET_STATUS'
#define eepromBegin() eeprom_busy_wait(); noInterrupts() // Details on https://youtu.be/_yOcKwu7mQA
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:279:5: note: in expansion of macro 'eepromBegin'
eepromBegin();
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor
Result: PASS
Sketch uses 8392 bytes (17%) of program storage space. Maximum is 49152 bytes. Global variables use 378 bytes (6%) of dynamic memory, leaving 5766 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8946 bytes (18%) of program storage space. Maximum is 49152 bytes. Global variables use 294 bytes (4%) of dynamic memory, leaving 5850 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 14670 bytes (29%) of program storage space. Maximum is 49152 bytes. Global variables use 608 bytes (9%) of dynamic memory, leaving 5536 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 18156 bytes (36%) of program storage space. Maximum is 49152 bytes. Global variables use 617 bytes (10%) of dynamic memory, leaving 5527 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 7892 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 288 bytes (4%) of dynamic memory, leaving 5856 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8311 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 296 bytes (4%) of dynamic memory, leaving 5848 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8183 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 292 bytes (4%) of dynamic memory, leaving 5852 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8183 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 292 bytes (4%) of dynamic memory, leaving 5852 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13336 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3068 bytes (9%) of dynamic memory, leaving 29700 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15620 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3136 bytes (9%) of dynamic memory, leaving 29632 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_2Pin/Basic_RX_2Pin.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_2Pin/Basic_RX_2Pin.ino:36:17: error: 'class NRFLite' has no member named 'initTwoPin'; did you mean 'initRadio'?
if (!_radio.initTwoPin(RADIO_ID, PIN_RADIO_MOMI, PIN_RADIO_SCK)) // Note usage of 'initTwoPin' rather than 'init'.
^~~~~~~~~~
initRadio
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino:48:75: error: no matching function for call to 'SPIClassSAMD::begin(const uint8_t&, const uint8_t&, const uint8_t&, const uint8_t&)'
SPI.begin(PIN_RADIO_SCK, PIN_RADIO_MISO, PIN_RADIO_MOSI, PIN_RADIO_CSN);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_ESP32/Basic_RX_ESP32.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:63:8: note: candidate: virtual void SPIClassSAMD::begin()
void begin();
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:63:8: note: candidate expects 0 arguments, 4 provided
Result: PASS
Sketch uses 15764 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3136 bytes (9%) of dynamic memory, leaving 29632 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15000 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3136 bytes (9%) of dynamic memory, leaving 29632 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_TX_2Pin/Basic_TX_2Pin.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_TX_2Pin/Basic_TX_2Pin.ino:39:17: error: 'class NRFLite' has no member named 'initTwoPin'; did you mean 'initRadio'?
if (!_radio.initTwoPin(RADIO_ID, PIN_RADIO_MOMI, PIN_RADIO_SCK)) // Note usage of 'initTwoPin' rather than 'init'.
^~~~~~~~~~
initRadio
Result: PASS
Sketch uses 14656 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3136 bytes (9%) of dynamic memory, leaving 29632 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14656 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3136 bytes (9%) of dynamic memory, leaving 29632 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15440 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3124 bytes (9%) of dynamic memory, leaving 29644 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15452 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3272 bytes (9%) of dynamic memory, leaving 29496 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15520 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3280 bytes (10%) of dynamic memory, leaving 29488 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15568 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3160 bytes (9%) of dynamic memory, leaving 29608 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 16564 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3160 bytes (9%) of dynamic memory, leaving 29608 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_RX/Sensor_RX.ino:68:16: error: declaration of 'ChangeType NewSettingsPacket::ChangeType' [-fpermissive]
ChangeType ChangeType;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_RX/Sensor_RX.ino:57:6: error: changes meaning of 'ChangeType' from 'enum ChangeType' [-fpermissive]
enum ChangeType
^~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:34:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 15996 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3216 bytes (9%) of dynamic memory, leaving 29552 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 16324 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3136 bytes (9%) of dynamic memory, leaving 29632 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 23732 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3396 bytes (10%) of dynamic memory, leaving 29372 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 32712 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3408 bytes (10%) of dynamic memory, leaving 29360 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15744 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3124 bytes (9%) of dynamic memory, leaving 29644 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 16136 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3132 bytes (9%) of dynamic memory, leaving 29636 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15968 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3128 bytes (9%) of dynamic memory, leaving 29640 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 15972 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3128 bytes (9%) of dynamic memory, leaving 29640 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 199302 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13128 bytes (4%) of dynamic memory, leaving 314552 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210214 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13552 bytes (4%) of dynamic memory, leaving 314128 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_2Pin/Basic_RX_2Pin.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_RX_2Pin/Basic_RX_2Pin.ino:36:17: error: 'class NRFLite' has no member named 'initTwoPin'
if (!_radio.initTwoPin(RADIO_ID, PIN_RADIO_MOMI, PIN_RADIO_SCK)) // Note usage of 'initTwoPin' rather than 'init'.
^
Result: PASS
Sketch uses 210274 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13552 bytes (4%) of dynamic memory, leaving 314128 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210358 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13552 bytes (4%) of dynamic memory, leaving 314128 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 209698 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13552 bytes (4%) of dynamic memory, leaving 314128 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_TX_2Pin/Basic_TX_2Pin.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Basic_TX_2Pin/Basic_TX_2Pin.ino:39:17: error: 'class NRFLite' has no member named 'initTwoPin'
if (!_radio.initTwoPin(RADIO_ID, PIN_RADIO_MOMI, PIN_RADIO_SCK)) // Note usage of 'initTwoPin' rather than 'init'.
^
Result: PASS
Sketch uses 204010 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13384 bytes (4%) of dynamic memory, leaving 314296 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 204010 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13384 bytes (4%) of dynamic memory, leaving 314296 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210086 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13536 bytes (4%) of dynamic memory, leaving 314144 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210246 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14032 bytes (4%) of dynamic memory, leaving 313648 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210290 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14040 bytes (4%) of dynamic memory, leaving 313640 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210154 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13576 bytes (4%) of dynamic memory, leaving 314104 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210710 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13576 bytes (4%) of dynamic memory, leaving 314104 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_RX/Sensor_RX.ino:68:16: error: declaration of 'ChangeType NewSettingsPacket::ChangeType' [-fpermissive]
ChangeType ChangeType;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_RX/Sensor_RX.ino:57:6: error: changes meaning of 'ChangeType' from 'enum ChangeType' [-fpermissive]
enum ChangeType
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NRFLite/examples/Sensor_TX_ATtiny85_2Pin/Sensor_TX_ATtiny85_2Pin.ino:34:24: fatal error: avr/eeprom.h: No such file or directory compilation terminated.
Result: PASS
Sketch uses 210886 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13632 bytes (4%) of dynamic memory, leaving 314048 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 211534 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13552 bytes (4%) of dynamic memory, leaving 314128 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 214858 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217138 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210318 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13536 bytes (4%) of dynamic memory, leaving 314144 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210770 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13544 bytes (4%) of dynamic memory, leaving 314136 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210614 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13544 bytes (4%) of dynamic memory, leaving 314136 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210610 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13544 bytes (4%) of dynamic memory, leaving 314136 bytes for local variables. Maximum is 327680 bytes.