PMS Library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

PMS Library

Version: 1.1.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Advanced	Basic	Expert
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 466 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/Advanced

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Advanced/Advanced.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Advanced/Advanced.ino:9:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(9600);  // GPIO2 (D4 pin on ESP-12E Development Board)
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Advanced/Advanced.ino:9:3: note: suggested alternative: 'Serial'
   Serial1.begin(9600);  // GPIO2 (D4 pin on ESP-12E Development Board)
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Advanced/Advanced.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Advanced/Advanced.ino:15:3: error: 'Serial1' was not declared in this scope
   Serial1.println("Waking up, wait 30 seconds for stable readings...");
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Advanced/Advanced.ino:15:3: note: suggested alternative: 'Serial'
   Serial1.println("Waking up, wait 30 seconds for stable readings...");
   ^~~~~~~
   Serial

examples/Basic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Basic/Basic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Basic/Basic.ino:9:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(9600);  // GPIO2 (D4 pin on ESP-12E Development Board)
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Basic/Basic.ino:9:3: note: suggested alternative: 'Serial'
   Serial1.begin(9600);  // GPIO2 (D4 pin on ESP-12E Development Board)
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Basic/Basic.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Basic/Basic.ino:16:5: error: 'Serial1' was not declared in this scope
     Serial1.print("PM 1.0 (ug/m3): ");
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Basic/Basic.ino:16:5: note: suggested alternative: 'Serial'
     Serial1.print("PM 1.0 (ug/m3): ");
     ^~~~~~~
     Serial

examples/Expert

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:7:19: error: 'Serial1' was not declared in this scope
 #define DEBUG_OUT Serial1
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:22:3: note: in expansion of macro 'DEBUG_OUT'
   DEBUG_OUT.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:7:19: note: suggested alternative: 'Serial'
 #define DEBUG_OUT Serial1
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:22:3: note: in expansion of macro 'DEBUG_OUT'
   DEBUG_OUT.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino: In function 'void timerCallback()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:7:19: error: 'Serial1' was not declared in this scope
 #define DEBUG_OUT Serial1
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:60:5: note: in expansion of macro 'DEBUG_OUT'
     DEBUG_OUT.println("Going to sleep.");
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:7:19: note: suggested alternative: 'Serial'
 #define DEBUG_OUT Serial1
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:60:5: note: in expansion of macro 'DEBUG_OUT'
     DEBUG_OUT.println("Going to sleep.");
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:7:19: error: 'Serial1' was not declared in this scope
 #define DEBUG_OUT Serial1
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:65:5: note: in expansion of macro 'DEBUG_OUT'
     DEBUG_OUT.println("Waking up.");
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:7:19: note: suggested alternative: 'Serial'
 #define DEBUG_OUT Serial1
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:65:5: note: in expansion of macro 'DEBUG_OUT'
     DEBUG_OUT.println("Waking up.");
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino: In function 'void readData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:7:19: error: 'Serial1' was not declared in this scope
 #define DEBUG_OUT Serial1
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:78:3: note: in expansion of macro 'DEBUG_OUT'
   DEBUG_OUT.println("Send read request...");
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:7:19: note: suggested alternative: 'Serial'
 #define DEBUG_OUT Serial1
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PMS_Library/examples/Expert/Expert.ino:78:3: note: in expansion of macro 'DEBUG_OUT'
   DEBUG_OUT.println("Send read request...");
   ^~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/Advanced

Result: PASS

Sketch uses 79604 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43492 bytes (16%) of dynamic memory, leaving 226844 bytes for local variables. Maximum is 270336 bytes.

examples/Basic

Result: PASS

Sketch uses 79294 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43492 bytes (16%) of dynamic memory, leaving 226844 bytes for local variables. Maximum is 270336 bytes.

examples/Expert

Result: PASS

Sketch uses 79736 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43484 bytes (16%) of dynamic memory, leaving 226852 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/Advanced

Result: PASS

Sketch uses 4455 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 371 bytes (6%) of dynamic memory, leaving 5773 bytes for local variables. Maximum is 6144 bytes.

examples/Basic

Result: PASS

Sketch uses 3691 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 371 bytes (6%) of dynamic memory, leaving 5773 bytes for local variables. Maximum is 6144 bytes.

examples/Expert

Result: PASS

Sketch uses 4394 bytes (8%) of program storage space. Maximum is 49152 bytes.
Global variables use 367 bytes (5%) of dynamic memory, leaving 5777 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/Advanced

Result: PASS

Sketch uses 13372 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3040 bytes (9%) of dynamic memory, leaving 29728 bytes for local variables. Maximum is 32768 bytes.

examples/Basic

Result: PASS

Sketch uses 12868 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3040 bytes (9%) of dynamic memory, leaving 29728 bytes for local variables. Maximum is 32768 bytes.

examples/Expert

Result: PASS

Sketch uses 13432 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3032 bytes (9%) of dynamic memory, leaving 29736 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198026 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13100 bytes (3%) of dynamic memory, leaving 314580 bytes for local variables. Maximum is 327680 bytes.

examples/Advanced

Result: PASS

Sketch uses 205858 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13472 bytes (4%) of dynamic memory, leaving 314208 bytes for local variables. Maximum is 327680 bytes.

examples/Basic

Result: PASS

Sketch uses 205358 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13472 bytes (4%) of dynamic memory, leaving 314208 bytes for local variables. Maximum is 327680 bytes.

examples/Expert

Result: PASS

Sketch uses 205950 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13464 bytes (4%) of dynamic memory, leaving 314216 bytes for local variables. Maximum is 327680 bytes.