This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.1
More details
| Board | Claims compatibility | Inclusion | print_data |
|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL |
Result: PASS
Sketch uses 490 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:27: error: 'USART2' was not declared in this scope
HardwareSerial esc_serial(USART2);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:27: note: suggested alternative: 'EEAR2'
HardwareSerial esc_serial(USART2);
^~~~~~
EEAR2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: error: 'PB12' was not declared in this scope
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: note: suggested alternative: 'PB2'
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^~~~~~~
Result: PASS
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:27: error: 'USART2' was not declared in this scope
HardwareSerial esc_serial(USART2);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:27: note: suggested alternative: '_UART2_'
HardwareSerial esc_serial(USART2);
^~~~~~
_UART2_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:16: error: cannot declare variable 'esc_serial' to be of abstract type 'arduino::HardwareSerial'
HardwareSerial esc_serial(USART2);
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Serial.h:25:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:102,
from /tmp/arduino-sketch-30146BDC0C026AC377C2393FD1C85F92/sketch/print_data.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:87:7: note: because the following virtual functions are pure within 'arduino::HardwareSerial':
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:97:20: note: virtual size_t arduino::HardwareSerial::write(uint8_t)
virtual size_t write(uint8_t) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:96:18: note: virtual void arduino::HardwareSerial::flush()
virtual void flush(void) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:93:17: note: virtual int arduino::HardwareSerial::available()
virtual int available(void) = 0;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:95:17: note: virtual int arduino::HardwareSerial::read()
virtual int read(void) = 0;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:94:17: note: virtual int arduino::HardwareSerial::peek()
virtual int peek(void) = 0;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:90:18: note: virtual void arduino::HardwareSerial::begin(long unsigned int)
virtual void begin(unsigned long) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:91:18: note: virtual void arduino::HardwareSerial::begin(long unsigned int, uint16_t)
virtual void begin(unsigned long baudrate, uint16_t config) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:92:18: note: virtual void arduino::HardwareSerial::end()
virtual void end() = 0;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSerial.h:99:13: note: virtual arduino::HardwareSerial::operator bool()
virtual operator bool() = 0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: error: 'PB12' was not declared in this scope
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: note: suggested alternative: 'B11'
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^~~~~~~
Result: PASS
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:33: error: no matching function for call to 'arduino::HardwareSerial::HardwareSerial(USART_t&)'
HardwareSerial esc_serial(USART2);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-30146BDC0C026AC377C2393FD1C85F92/sketch/print_data.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: candidate: arduino::HardwareSerial::HardwareSerial()
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: candidate: constexpr arduino::HardwareSerial::HardwareSerial(const arduino::HardwareSerial&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: no known conversion for argument 1 from 'USART_t {aka USART_struct}' to 'const arduino::HardwareSerial&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: candidate: constexpr arduino::HardwareSerial::HardwareSerial(arduino::HardwareSerial&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: no known conversion for argument 1 from 'USART_t {aka USART_struct}' to 'arduino::HardwareSerial&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:16: error: cannot declare variable 'esc_serial' to be of abstract type 'arduino::HardwareSerial'
HardwareSerial esc_serial(USART2);
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-30146BDC0C026AC377C2393FD1C85F92/sketch/print_data.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: because the following virtual functions are pure within 'arduino::HardwareSerial':
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:97:20: note: virtual size_t arduino::HardwareSerial::write(uint8_t)
virtual size_t write(uint8_t) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:96:18: note: virtual void arduino::HardwareSerial::flush()
virtual void flush(void) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:93:17: note: virtual int arduino::HardwareSerial::available()
virtual int available(void) = 0;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:95:17: note: virtual int arduino::HardwareSerial::read()
virtual int read(void) = 0;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:94:17: note: virtual int arduino::HardwareSerial::peek()
virtual int peek(void) = 0;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:90:18: note: virtual void arduino::HardwareSerial::begin(long unsigned int)
virtual void begin(unsigned long) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:91:18: note: virtual void arduino::HardwareSerial::begin(long unsigned int, uint16_t)
virtual void begin(unsigned long baudrate, uint16_t config) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:92:18: note: virtual void arduino::HardwareSerial::end()
virtual void end() = 0;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:99:13: note: virtual arduino::HardwareSerial::operator bool()
virtual operator bool() = 0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: error: 'PB12' was not declared in this scope
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: note: suggested alternative: 'B11'
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^~~~~~~
Result: PASS
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:27: error: 'USART2' was not declared in this scope
HardwareSerial esc_serial(USART2);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:27: note: suggested alternative: 'M_SQRT2'
HardwareSerial esc_serial(USART2);
^~~~~~
M_SQRT2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:16: error: cannot declare variable 'esc_serial' to be of abstract type 'arduino::HardwareSerial'
HardwareSerial esc_serial(USART2);
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-30146BDC0C026AC377C2393FD1C85F92/sketch/print_data.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: because the following virtual functions are pure within 'arduino::HardwareSerial':
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:97:20: note: virtual size_t arduino::HardwareSerial::write(uint8_t)
virtual size_t write(uint8_t) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:96:18: note: virtual void arduino::HardwareSerial::flush()
virtual void flush(void) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:93:17: note: virtual int arduino::HardwareSerial::available()
virtual int available(void) = 0;
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:95:17: note: virtual int arduino::HardwareSerial::read()
virtual int read(void) = 0;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:94:17: note: virtual int arduino::HardwareSerial::peek()
virtual int peek(void) = 0;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:90:18: note: virtual void arduino::HardwareSerial::begin(long unsigned int)
virtual void begin(unsigned long) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:91:18: note: virtual void arduino::HardwareSerial::begin(long unsigned int, uint16_t)
virtual void begin(unsigned long baudrate, uint16_t config) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:92:18: note: virtual void arduino::HardwareSerial::end()
virtual void end() = 0;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:99:13: note: virtual arduino::HardwareSerial::operator bool()
virtual operator bool() = 0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: error: 'PB12' was not declared in this scope
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: note: suggested alternative: '._12'
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^~~~~~~
Result: PASS
Sketch uses 200390 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:36:27: error: 'USART2' was not declared in this scope
HardwareSerial esc_serial(USART2);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:34:21: error: 'PB12' was not declared in this scope
#define LED_PIN PB12
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PRDC_TMAESC/examples/print_data/print_data.ino:47:11: note: in expansion of macro 'LED_PIN'
pinMode(LED_PIN, OUTPUT);
^