PU2CLR KT0915 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

PU2CLR KT0915

Version: 1.0.3
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	KT0915_02_OLED	KT0915_03_TFT_DISPLAY	kt0915_01_serial_monitor	kt0915_99_minimal_receiver
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	PASS	FAIL	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	PASS	FAIL	PASS
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	PASS	FAIL	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	PASS	FAIL	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/KT0915_02_OLED

Result: FAIL

examples/KT0915_03_TFT_DISPLAY

Result: PASS

Sketch uses 26062 bytes (80%) of program storage space. Maximum is 32256 bytes.
Global variables use 745 bytes (36%) of dynamic memory, leaving 1303 bytes for local variables. Maximum is 2048 bytes.

examples/kt0915_01_serial_monitor

Result: FAIL

examples/kt0915_99_minimal_receiver

Result: PASS

Sketch uses 4662 bytes (14%) of program storage space. Maximum is 32256 bytes.
Global variables use 246 bytes (12%) of dynamic memory, leaving 1802 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/KT0915_02_OLED

Result: FAIL

examples/KT0915_03_TFT_DISPLAY

Result: PASS

Sketch uses 93910 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45216 bytes (16%) of dynamic memory, leaving 225120 bytes for local variables. Maximum is 270336 bytes.

examples/kt0915_01_serial_monitor

Result: FAIL

examples/kt0915_99_minimal_receiver

Result: PASS

Sketch uses 83160 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44256 bytes (16%) of dynamic memory, leaving 226080 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-B8C0E72D952D47E8D7C731A5187D12E6/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO1 : 2;      //!< CH Pin Mode Selection; 00 = High Z; 01 = Key controlled channel increase / decrease; 10 = Dial controlled channel increase / decrease; 11 = Reserved
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO2 : 2;      //!< VOL Pin Mode Selection; 00 = High Z; 01 = Key controlled volume increase/decrease; 10 = Dial controlled volume increase/decrease; 11 = Reserved
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected ')' before 'volatile'

examples/KT0915_02_OLED

Result: FAIL

examples/KT0915_03_TFT_DISPLAY

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-E02F856277849B7E45EA16EB19B8E160/sketch/KT0915_03_TFT_DISPLAY.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO1 : 2;      //!< CH Pin Mode Selection; 00 = High Z; 01 = Key controlled channel increase / decrease; 10 = Dial controlled channel increase / decrease; 11 = Reserved
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO2 : 2;      //!< VOL Pin Mode Selection; 00 = High Z; 01 = Key controlled volume increase/decrease; 10 = Dial controlled volume increase/decrease; 11 = Reserved
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected ')' before 'volatile'

examples/kt0915_01_serial_monitor

Result: FAIL

examples/kt0915_99_minimal_receiver

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-7927CE12743524A055198B189C03E829/sketch/kt0915_99_minimal_receiver.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO1 : 2;      //!< CH Pin Mode Selection; 00 = High Z; 01 = Key controlled channel increase / decrease; 10 = Dial controlled channel increase / decrease; 11 = Reserved
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:340:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO2 : 2;      //!< VOL Pin Mode Selection; 00 = High Z; 01 = Key controlled volume increase/decrease; 10 = Dial controlled volume increase/decrease; 11 = Reserved
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_KT0915/KT0915.h:341:17: error: expected ')' before 'volatile'

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/KT0915_02_OLED

Result: FAIL

examples/KT0915_03_TFT_DISPLAY

Result: PASS

Sketch uses 35768 bytes (13%) of program storage space. Maximum is 262144 bytes.
Global variables use 4348 bytes (13%) of dynamic memory, leaving 28420 bytes for local variables. Maximum is 32768 bytes.

examples/kt0915_01_serial_monitor

Result: FAIL

examples/kt0915_99_minimal_receiver

Result: PASS

Sketch uses 14792 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3600 bytes (10%) of dynamic memory, leaving 29168 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 203282 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/KT0915_02_OLED

Result: FAIL

examples/KT0915_03_TFT_DISPLAY

Result: PASS

Sketch uses 236890 bytes (18%) of program storage space. Maximum is 1310720 bytes.
Global variables use 15192 bytes (4%) of dynamic memory, leaving 312488 bytes for local variables. Maximum is 327680 bytes.

examples/kt0915_01_serial_monitor

Result: FAIL

examples/kt0915_99_minimal_receiver

Result: PASS

Sketch uses 210734 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14024 bytes (4%) of dynamic memory, leaving 313656 bytes for local variables. Maximum is 327680 bytes.