PU2CLR RDA5807 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

PU2CLR RDA5807

Version: 1.0.5
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	RDA5807_03_attimy84	RDA5807_00_CIRCUIT_TEST	RDA5807_01_SERIAL_MONITOR	RDA5807_02_TFT_display
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	PASS	FAIL	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	PASS	FAIL	PASS
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	PASS	FAIL	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	PASS	FAIL	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/RDA5807_00_CIRCUIT_TEST

Result: PASS

Sketch uses 7470 bytes (23%) of program storage space. Maximum is 32256 bytes.
Global variables use 930 bytes (45%) of dynamic memory, leaving 1118 bytes for local variables. Maximum is 2048 bytes.

examples/RDA5807_01_SERIAL_MONITOR

Result: FAIL

examples/RDA5807_02_TFT_display

Result: PASS

Sketch uses 29086 bytes (90%) of program storage space. Maximum is 32256 bytes.
Global variables use 1065 bytes (52%) of dynamic memory, leaving 983 bytes for local variables. Maximum is 2048 bytes.

examples/RDA5807_03_attimy84

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:98:3: error: 'deley' was not declared in this scope
   deley(1);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:98:3: note: suggested alternative: 'delay'
   deley(1);
   ^~~~~
   delay

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/RDA5807_00_CIRCUIT_TEST

Result: PASS

Sketch uses 83582 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44504 bytes (16%) of dynamic memory, leaving 225832 bytes for local variables. Maximum is 270336 bytes.

examples/RDA5807_01_SERIAL_MONITOR

Result: FAIL

examples/RDA5807_02_TFT_display

Result: PASS

Sketch uses 94796 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45280 bytes (16%) of dynamic memory, leaving 225056 bytes for local variables. Maximum is 270336 bytes.

examples/RDA5807_03_attimy84

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:98:3: error: 'deley' was not declared in this scope
   deley(1);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:98:3: note: suggested alternative: 'delay'
   deley(1);
   ^~~~~
   delay

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-EEC26FF30C0A0A9DD7747E93EB3253E2/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO1 : 2;        //!< General Purpose I/O 1. when gpio_sel=01; 00 = High impedance; 01 = Reserved; 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO2 : 2;        //!< General Purpose I/O 2. when gpio_sel=01; 00 = High impedance; 01 = Reserved; 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO3 : 2;        //!< General Purpose I/O 1. when gpio_sel=01; 00 = High impedance; 01 = Mono/Stereo indicator (ST); 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected ')' before 'volatile'

examples/RDA5807_00_CIRCUIT_TEST

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-7A4F8C92B671F77BB7054BF42509635B/sketch/RDA5807_00_CIRCUIT_TEST.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO1 : 2;        //!< General Purpose I/O 1. when gpio_sel=01; 00 = High impedance; 01 = Reserved; 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO2 : 2;        //!< General Purpose I/O 2. when gpio_sel=01; 00 = High impedance; 01 = Reserved; 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO3 : 2;        //!< General Purpose I/O 1. when gpio_sel=01; 00 = High impedance; 01 = Mono/Stereo indicator (ST); 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected ')' before 'volatile'

examples/RDA5807_01_SERIAL_MONITOR

Result: FAIL

examples/RDA5807_02_TFT_display

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-987A95A9F82987D5B43155DDA5DD00B0/sketch/RDA5807_02_TFT_display.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO1 : 2;        //!< General Purpose I/O 1. when gpio_sel=01; 00 = High impedance; 01 = Reserved; 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO2 : 2;        //!< General Purpose I/O 2. when gpio_sel=01; 00 = High impedance; 01 = Reserved; 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO3 : 2;        //!< General Purpose I/O 1. when gpio_sel=01; 00 = High impedance; 01 = Mono/Stereo indicator (ST); 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected ')' before 'volatile'

examples/RDA5807_03_attimy84

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-E0DA022458B3E0E07216B085002D34B7/sketch/RDA5807_03_attimy84.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO1 : 2;        //!< General Purpose I/O 1. when gpio_sel=01; 00 = High impedance; 01 = Reserved; 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:214:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO2 : 2;        //!< General Purpose I/O 2. when gpio_sel=01; 00 = High impedance; 01 = Reserved; 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:215:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected unqualified-id before 'volatile'
         uint8_t GPIO3 : 2;        //!< General Purpose I/O 1. when gpio_sel=01; 00 = High impedance; 01 = Mono/Stereo indicator (ST); 10 = Low; 11 = High
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/RDA5807.h:216:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:98:3: error: 'deley' was not declared in this scope
   deley(1);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:98:3: note: suggested alternative: 'delay'
   deley(1);
   ^~~~~
   delay

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/RDA5807_00_CIRCUIT_TEST

Result: PASS

Sketch uses 23104 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3848 bytes (11%) of dynamic memory, leaving 28920 bytes for local variables. Maximum is 32768 bytes.

examples/RDA5807_01_SERIAL_MONITOR

Result: FAIL

examples/RDA5807_02_TFT_display

Result: PASS

Sketch uses 43756 bytes (16%) of program storage space. Maximum is 262144 bytes.
Global variables use 4432 bytes (13%) of dynamic memory, leaving 28336 bytes for local variables. Maximum is 32768 bytes.

examples/RDA5807_03_attimy84

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:98:3: error: 'deley' was not declared in this scope
   deley(1);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:98:3: note: suggested alternative: 'delay'
   deley(1);
   ^~~~~
   delay

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 203546 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/RDA5807_00_CIRCUIT_TEST

Result: PASS

Sketch uses 216446 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14416 bytes (4%) of dynamic memory, leaving 313264 bytes for local variables. Maximum is 327680 bytes.

examples/RDA5807_01_SERIAL_MONITOR

Result: FAIL

examples/RDA5807_02_TFT_display

Result: PASS

Sketch uses 242414 bytes (18%) of program storage space. Maximum is 1310720 bytes.
Global variables use 15432 bytes (4%) of dynamic memory, leaving 312248 bytes for local variables. Maximum is 327680 bytes.

examples/RDA5807_03_attimy84

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED_common.h:49:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED_Wire.h:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED.h:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_RDA5807/examples/RDA5807_03_attimy84/RDA5807_03_attimy84.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/font6x8.h:20:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.