This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.4
More details
| Board | Claims compatibility | Inclusion | si470x_05_attiny85 |
si470x_01_serial_monitor |
si470x_02_TFT_display |
si470x_03_STM32_OLED |
si470x_04_attimy84 |
|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | FAIL | PASS | FAIL | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | FAIL | PASS | FAIL | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | FAIL | PASS | FAIL | FAIL |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: PASS
Sketch uses 26680 bytes (82%) of program storage space. Maximum is 32256 bytes. Global variables use 920 bytes (44%) of dynamic memory, leaving 1128 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: PASS
Sketch uses 10008 bytes (31%) of program storage space. Maximum is 32256 bytes. Global variables use 600 bytes (29%) of dynamic memory, leaving 1448 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 9690 bytes (30%) of program storage space. Maximum is 32256 bytes. Global variables use 592 bytes (28%) of dynamic memory, leaving 1456 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_02_TFT_display/si470x_02_TFT_display.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_02_TFT_display/si470x_02_TFT_display.ino:373:11: error: call to 'NinaPin::operator int' declared with attribute error: Change me to a #define rx.setup(RESET_PIN, A4 /* SDA pin for Arduino ATmega328 */); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_04_attimy84/si470x_04_attimy84.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_04_attimy84/si470x_04_attimy84.ino:26:29: error: 'SDA' was not declared in this scope
#define SDA_PIN SDA //
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_04_attimy84/si470x_04_attimy84.ino:57:23: note: in expansion of macro 'SDA_PIN'
rx.setup(RESET_PIN, SDA_PIN);
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: error: 'PB1' was not declared in this scope
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:34:11: note: in expansion of macro 'SEEK_UP'
pinMode(SEEK_UP, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: note: suggested alternative: 'B1'
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:34:11: note: in expansion of macro 'SEEK_UP'
pinMode(SEEK_UP, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:28:19: error: 'PB4' was not declared in this scope
#define SEEK_DOWN PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:35:11: note: in expansion of macro 'SEEK_DOWN'
pinMode(SEEK_DOWN, INPUT_PULLUP);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:24:25: error: 'PB3' was not declared in this scope
#define RESET_PIN PB3 // On Arduino Atmega328 based board, this pin is labeled as A0 (14 means digital pin instead analog)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:48:12: note: in expansion of macro 'RESET_PIN'
rx.setup(RESET_PIN, SDA_PIN);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:25:25: error: 'SDA' was not declared in this scope
#define SDA_PIN SDA //
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:48:23: note: in expansion of macro 'SDA_PIN'
rx.setup(RESET_PIN, SDA_PIN);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: error: 'PB1' was not declared in this scope
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:68:19: note: in expansion of macro 'SEEK_UP'
if (digitalRead(SEEK_UP) == LOW ) {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: note: suggested alternative: 'B1'
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:68:19: note: in expansion of macro 'SEEK_UP'
if (digitalRead(SEEK_UP) == LOW ) {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:28:19: error: 'PB4' was not declared in this scope
#define SEEK_DOWN PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:72:19: note: in expansion of macro 'SEEK_DOWN'
if (digitalRead(SEEK_DOWN) == LOW ) {
^~~~~~~~~
Result: FAIL
This library has no main header file so an empty one was created.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-45F303C12AE068699B929439D43CA63F/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO1 : 2; //!< General Purpose I/O 1; 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO2 : 2; //!< General Purpose I/O 2. 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO3 : 2; //!< General Purpose I/O 2. 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected ')' before 'volatile'
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-C3DC47251D6E5B7C55A2995F9A63BC70/sketch/si470x_02_TFT_display.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO1 : 2; //!< General Purpose I/O 1; 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO2 : 2; //!< General Purpose I/O 2. 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO3 : 2; //!< General Purpose I/O 2. 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected ')' before 'volatile'
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-68728F298B40B3C06102AEED78403F4B/sketch/si470x_04_attimy84.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO1 : 2; //!< General Purpose I/O 1; 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO2 : 2; //!< General Purpose I/O 2. 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO3 : 2; //!< General Purpose I/O 2. 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected ')' before 'volatile'
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-15BED7FF0674862843C81D75460EC283/sketch/si470x_05_attiny85.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO1 : 2; //!< General Purpose I/O 1; 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:151:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO2 : 2; //!< General Purpose I/O 2. 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:152:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected unqualified-id before 'volatile'
uint8_t GPIO3 : 2; //!< General Purpose I/O 2. 00 = High impedance (default); 01 = Reserved; 10 = Low; 11 = High.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/SI470X.h:153:17: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: error: 'PB1' was not declared in this scope
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:34:11: note: in expansion of macro 'SEEK_UP'
pinMode(SEEK_UP, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: note: suggested alternative: 'B1'
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:34:11: note: in expansion of macro 'SEEK_UP'
pinMode(SEEK_UP, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:28:19: error: 'PB4' was not declared in this scope
#define SEEK_DOWN PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:35:11: note: in expansion of macro 'SEEK_DOWN'
pinMode(SEEK_DOWN, INPUT_PULLUP);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:28:19: note: suggested alternative: 'PB'
#define SEEK_DOWN PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:35:11: note: in expansion of macro 'SEEK_DOWN'
pinMode(SEEK_DOWN, INPUT_PULLUP);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:24:25: error: 'PB3' was not declared in this scope
#define RESET_PIN PB3 // On Arduino Atmega328 based board, this pin is labeled as A0 (14 means digital pin instead analog)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:48:12: note: in expansion of macro 'RESET_PIN'
rx.setup(RESET_PIN, SDA_PIN);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:24:25: note: suggested alternative: 'PB'
#define RESET_PIN PB3 // On Arduino Atmega328 based board, this pin is labeled as A0 (14 means digital pin instead analog)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:48:12: note: in expansion of macro 'RESET_PIN'
rx.setup(RESET_PIN, SDA_PIN);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: error: 'PB1' was not declared in this scope
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:68:19: note: in expansion of macro 'SEEK_UP'
if (digitalRead(SEEK_UP) == LOW ) {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: note: suggested alternative: 'B1'
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:68:19: note: in expansion of macro 'SEEK_UP'
if (digitalRead(SEEK_UP) == LOW ) {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:28:19: error: 'PB4' was not declared in this scope
#define SEEK_DOWN PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:72:19: note: in expansion of macro 'SEEK_DOWN'
if (digitalRead(SEEK_DOWN) == LOW ) {
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:28:19: note: suggested alternative: 'PB'
#define SEEK_DOWN PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:72:19: note: in expansion of macro 'SEEK_DOWN'
if (digitalRead(SEEK_DOWN) == LOW ) {
^~~~~~~~~
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: PASS
Sketch uses 36964 bytes (14%) of program storage space. Maximum is 262144 bytes. Global variables use 4460 bytes (13%) of dynamic memory, leaving 28308 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: PASS
Sketch uses 26968 bytes (10%) of program storage space. Maximum is 262144 bytes. Global variables use 3936 bytes (12%) of dynamic memory, leaving 28832 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: error: 'PB1' was not declared in this scope
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:34:11: note: in expansion of macro 'SEEK_UP'
pinMode(SEEK_UP, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: note: suggested alternative: 'B1'
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:34:11: note: in expansion of macro 'SEEK_UP'
pinMode(SEEK_UP, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:28:19: error: 'PB4' was not declared in this scope
#define SEEK_DOWN PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:35:11: note: in expansion of macro 'SEEK_DOWN'
pinMode(SEEK_DOWN, INPUT_PULLUP);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:24:25: error: 'PB3' was not declared in this scope
#define RESET_PIN PB3 // On Arduino Atmega328 based board, this pin is labeled as A0 (14 means digital pin instead analog)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:48:12: note: in expansion of macro 'RESET_PIN'
rx.setup(RESET_PIN, SDA_PIN);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: error: 'PB1' was not declared in this scope
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:68:19: note: in expansion of macro 'SEEK_UP'
if (digitalRead(SEEK_UP) == LOW ) {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:27:19: note: suggested alternative: 'B1'
#define SEEK_UP PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:68:19: note: in expansion of macro 'SEEK_UP'
if (digitalRead(SEEK_UP) == LOW ) {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:28:19: error: 'PB4' was not declared in this scope
#define SEEK_DOWN PB4
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:72:19: note: in expansion of macro 'SEEK_DOWN'
if (digitalRead(SEEK_DOWN) == LOW ) {
^~~~~~~~~
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 203426 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
Result: PASS
Sketch uses 238126 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 15312 bytes (4%) of dynamic memory, leaving 312368 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED_common.h:49:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED_Wire.h:12,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED.h:12,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_04_attimy84/si470x_04_attimy84.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/font6x8.h:20:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED_common.h:49:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED_Wire.h:12,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED.h:12,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI470X/examples/si470x_05_attiny85/si470x_05_attiny85.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/font6x8.h:20:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.