This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.9
More details
| Board | Claims compatibility | Inclusion | SI4844_CUSTOM_BAND |
SI4844_FIRMWARE |
SI4844_MINIMAL |
SI4844_OLED |
SI4844_POC |
SI47XX_ATTINY85_MINI_OLED_I2C |
SI4844_BASS_TREBLE |
|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | PASS | PASS | FAIL | PASS | FAIL | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | PASS | PASS | FAIL | PASS | FAIL | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | PASS | PASS | FAIL | PASS | FAIL | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | FAIL | PASS | FAIL | PASS |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 1820 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 128 bytes (6%) of dynamic memory, leaving 1920 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:3: error: 'GIMSK' was not declared in this scope
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:3: note: suggested alternative: 'EIMSK'
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~~
EIMSK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:16: error: 'PCIE' was not declared in this scope
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:16: note: suggested alternative: 'ACIE'
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~
ACIE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:3: error: 'PCMSK' was not declared in this scope
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:3: note: suggested alternative: 'PCMSK1'
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~
PCMSK1
Result: PASS
Sketch uses 7396 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 684 bytes (33%) of dynamic memory, leaving 1364 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6878 bytes (21%) of program storage space. Maximum is 32256 bytes. Global variables use 518 bytes (25%) of dynamic memory, leaving 1530 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7172 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 784 bytes (38%) of dynamic memory, leaving 1264 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6812 bytes (21%) of program storage space. Maximum is 32256 bytes. Global variables use 528 bytes (25%) of dynamic memory, leaving 1520 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 12764 bytes (39%) of program storage space. Maximum is 32256 bytes. Global variables use 396 bytes (19%) of dynamic memory, leaving 1652 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8408 bytes (26%) of program storage space. Maximum is 32256 bytes. Global variables use 1160 bytes (56%) of dynamic memory, leaving 888 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:31:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT3_vect)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:31:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT3_vect)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: error: 'PB1' was not declared in this scope
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:39:11: note: in expansion of macro 'BAND_SWITC'
pinMode(BAND_SWITC, INPUT_PULLUP);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: note: suggested alternative: 'B1'
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:39:11: note: in expansion of macro 'BAND_SWITC'
pinMode(BAND_SWITC, INPUT_PULLUP);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:19:21: error: 'PB4' was not declared in this scope
#define RST_PIN PB4 // Pin 3 is used to control the RESET of the device.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:40:11: note: in expansion of macro 'RST_PIN'
pinMode(RST_PIN, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:3: error: 'GIMSK' was not declared in this scope
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:16: error: 'PCIE' was not declared in this scope
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:16: note: suggested alternative: 'PI'
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~
PI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:3: error: 'PCMSK' was not declared in this scope
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:16: error: 'PCINT3' was not declared in this scope
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:16: note: suggested alternative: '__INT32'
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~~
__INT32
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:59:3: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: error: 'PB1' was not declared in this scope
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:120:19: note: in expansion of macro 'BAND_SWITC'
if (digitalRead(BAND_SWITC) == LOW ) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: note: suggested alternative: 'B1'
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:120:19: note: in expansion of macro 'BAND_SWITC'
if (digitalRead(BAND_SWITC) == LOW ) {
^~~~~~~~~~
Result: PASS
Sketch uses 86976 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44520 bytes (16%) of dynamic memory, leaving 225816 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 86562 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44520 bytes (16%) of dynamic memory, leaving 225816 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 86596 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44520 bytes (16%) of dynamic memory, leaving 225816 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 86498 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44520 bytes (16%) of dynamic memory, leaving 225816 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SSD1306Ascii/src/SSD1306AsciiAvrI2c.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI4844_OLED/SI4844_OLED.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SSD1306Ascii/src/utility/AvrI2c.h:28:2: error: #error AvrI2c not supported for this chip.
#error AvrI2c not supported for this chip.
^~~~~
Result: PASS
Sketch uses 87500 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44520 bytes (16%) of dynamic memory, leaving 225816 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 3656 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 415 bytes (6%) of dynamic memory, leaving 5729 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: error: 'PB1' was not declared in this scope
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:39:11: note: in expansion of macro 'BAND_SWITC'
pinMode(BAND_SWITC, INPUT_PULLUP);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: note: suggested alternative: 'B1'
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:39:11: note: in expansion of macro 'BAND_SWITC'
pinMode(BAND_SWITC, INPUT_PULLUP);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:19:21: error: 'PB4' was not declared in this scope
#define RST_PIN PB4 // Pin 3 is used to control the RESET of the device.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:40:11: note: in expansion of macro 'RST_PIN'
pinMode(RST_PIN, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:19:21: note: suggested alternative: 'PB'
#define RST_PIN PB4 // Pin 3 is used to control the RESET of the device.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:40:11: note: in expansion of macro 'RST_PIN'
pinMode(RST_PIN, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:3: error: 'GIMSK' was not declared in this scope
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:16: error: 'PCIE' was not declared in this scope
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:16: note: suggested alternative: 'PE'
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~
PE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:3: error: 'PCMSK' was not declared in this scope
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:16: error: 'PCINT3' was not declared in this scope
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:16: note: suggested alternative: 'PIN3'
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~~
PIN3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: error: 'PB1' was not declared in this scope
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:120:19: note: in expansion of macro 'BAND_SWITC'
if (digitalRead(BAND_SWITC) == LOW ) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: note: suggested alternative: 'B1'
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:120:19: note: in expansion of macro 'BAND_SWITC'
if (digitalRead(BAND_SWITC) == LOW ) {
^~~~~~~~~~
Result: PASS
Sketch uses 8584 bytes (17%) of program storage space. Maximum is 49152 bytes. Global variables use 708 bytes (11%) of dynamic memory, leaving 5436 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8081 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 708 bytes (11%) of dynamic memory, leaving 5436 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8404 bytes (17%) of program storage space. Maximum is 49152 bytes. Global variables use 708 bytes (11%) of dynamic memory, leaving 5436 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 8017 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 708 bytes (11%) of dynamic memory, leaving 5436 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SSD1306Ascii/src/SSD1306AsciiAvrI2c.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI4844_OLED/SI4844_OLED.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SSD1306Ascii/src/utility/AvrI2c.h:28:2: error: #error AvrI2c not supported for this chip.
#error AvrI2c not supported for this chip.
^~~~~
Result: PASS
Sketch uses 9589 bytes (19%) of program storage space. Maximum is 49152 bytes. Global variables use 708 bytes (11%) of dynamic memory, leaving 5436 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 13648 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3708 bytes (11%) of dynamic memory, leaving 29060 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:31:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT3_vect)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:31:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(PCINT3_vect)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: error: 'PB1' was not declared in this scope
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:39:11: note: in expansion of macro 'BAND_SWITC'
pinMode(BAND_SWITC, INPUT_PULLUP);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: note: suggested alternative: 'B1'
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:39:11: note: in expansion of macro 'BAND_SWITC'
pinMode(BAND_SWITC, INPUT_PULLUP);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:19:21: error: 'PB4' was not declared in this scope
#define RST_PIN PB4 // Pin 3 is used to control the RESET of the device.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:40:11: note: in expansion of macro 'RST_PIN'
pinMode(RST_PIN, INPUT_PULLUP);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:3: error: 'GIMSK' was not declared in this scope
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:16: error: 'PCIE' was not declared in this scope
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:56:16: note: suggested alternative: 'PI'
GIMSK = 1 << PCIE; // turn on pin change interrupts
^~~~
PI
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:3: error: 'PCMSK' was not declared in this scope
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:16: error: 'PCINT3' was not declared in this scope
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:57:16: note: suggested alternative: '__INT32'
PCMSK = 1 << PCINT3; // unmask PCINT3 pin change interrupt
^~~~~~
__INT32
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:59:3: error: 'sei' was not declared in this scope
sei();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: error: 'PB1' was not declared in this scope
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:120:19: note: in expansion of macro 'BAND_SWITC'
if (digitalRead(BAND_SWITC) == LOW ) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:20:21: note: suggested alternative: 'B1'
#define BAND_SWITC PB1 // Pin 6 is used to switch the band.
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:120:19: note: in expansion of macro 'BAND_SWITC'
if (digitalRead(BAND_SWITC) == LOW ) {
^~~~~~~~~~
Result: PASS
Sketch uses 25576 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3760 bytes (11%) of dynamic memory, leaving 29008 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 24996 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3760 bytes (11%) of dynamic memory, leaving 29008 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 25300 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3760 bytes (11%) of dynamic memory, leaving 29008 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 24944 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3760 bytes (11%) of dynamic memory, leaving 29008 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SSD1306Ascii/src/SSD1306AsciiAvrI2c.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI4844_OLED/SI4844_OLED.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SSD1306Ascii/src/utility/AvrI2c.h:28:2: error: #error AvrI2c not supported for this chip.
#error AvrI2c not supported for this chip.
^~~~~
Result: PASS
Sketch uses 26612 bytes (10%) of program storage space. Maximum is 262144 bytes. Global variables use 3760 bytes (11%) of dynamic memory, leaving 29008 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 203090 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED_common.h:49:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED_Wire.h:12,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/Tiny4kOLED.h:12,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI47XX_ATTINY85_MINI_OLED_I2C/SI47XX_ATTINY85_MINI_OLED_I2C.ino:14:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Tiny4kOLED/src/font6x8.h:20:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.
Result: PASS
Sketch uses 216374 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14672 bytes (4%) of dynamic memory, leaving 313008 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215730 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14672 bytes (4%) of dynamic memory, leaving 313008 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215970 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14672 bytes (4%) of dynamic memory, leaving 313008 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215662 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14672 bytes (4%) of dynamic memory, leaving 313008 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SSD1306Ascii/src/SSD1306AsciiAvrI2c.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PU2CLR_SI4844/examples/SI4844_OLED/SI4844_OLED.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SSD1306Ascii/src/utility/AvrI2c.h:28:2: error: #error AvrI2c not supported for this chip.
#error AvrI2c not supported for this chip.
^
Result: PASS
Sketch uses 217406 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14672 bytes (4%) of dynamic memory, leaving 313008 bytes for local variables. Maximum is 327680 bytes.