PicoAnalogCorrection - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

PicoAnalogCorrection

Version: 1.1.2
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	SimpleCalibration
arduino:avr:uno 1.8.4	No ⚠️	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/SimpleCalibration

Result: FAIL

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino:29:16: error: no matching function for call to 'HardwareSerial::begin()'
   Serial.begin();
                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:233:0,
                 from /tmp/arduino-sketch-483937C563573030843C2D4CE8346E95/sketch/SimpleCalibration.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/HardwareSerial.h:121:10: note: candidate: void HardwareSerial::begin(long unsigned int)
     void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/HardwareSerial.h:121:10: note:   candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/HardwareSerial.h:122:10: note: candidate: void HardwareSerial::begin(long unsigned int, uint8_t)
     void begin(unsigned long, uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/HardwareSerial.h:122:10: note:   candidate expects 2 arguments, 0 provided

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/SimpleCalibration

Result: FAIL

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino:29:16: error: no matching function for call to 'arduino::UART::begin()'
   Serial.begin();
                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:102:0,
                 from /tmp/arduino-sketch-483937C563573030843C2D4CE8346E95/sketch/SimpleCalibration.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Serial.h:46:8: note: candidate: virtual void arduino::UART::begin(long unsigned int)
   void begin(unsigned long);
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Serial.h:46:8: note:   candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Serial.h:47:8: note: candidate: virtual void arduino::UART::begin(long unsigned int, uint16_t)
   void begin(unsigned long baudrate, uint16_t config);
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Serial.h:47:8: note:   candidate expects 2 arguments, 0 provided

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/SimpleCalibration

Result: FAIL

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino:29:16: error: no matching function for call to 'UartClass::begin()'
   Serial.begin();
                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140:0,
                 from /tmp/arduino-sketch-483937C563573030843C2D4CE8346E95/sketch/SimpleCalibration.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:155:10: note: candidate: virtual void UartClass::begin(long unsigned int)
     void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:155:10: note:   candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:156:10: note: candidate: virtual void UartClass::begin(long unsigned int, uint16_t)
     void begin(unsigned long, uint16_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:156:10: note:   candidate expects 2 arguments, 0 provided

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12152 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/SimpleCalibration

Result: FAIL

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino:29:16: error: no matching function for call to 'Serial_::begin()'
   Serial.begin();
                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:112:0,
                 from /tmp/arduino-sketch-483937C563573030843C2D4CE8346E95/sketch/SimpleCalibration.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBAPI.h:103:7: note: candidate: void Serial_::begin(uint32_t)
  void begin(uint32_t baud_count);
       ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBAPI.h:103:7: note:   candidate expects 1 argument, 0 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBAPI.h:104:7: note: candidate: void Serial_::begin(long unsigned int, uint8_t)
  void begin(unsigned long, uint8_t);
       ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBAPI.h:104:7: note:   candidate expects 2 arguments, 0 provided

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 200442 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.

examples/SimpleCalibration

Result: FAIL

WARNING: library PicoAnalogCorrection claims to run on rp2040 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino:17:25: error: 'A1' was not declared in this scope
 const uint8_t GND_PIN = A1; // GND meas pin
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PicoAnalogCorrection/examples/SimpleCalibration/SimpleCalibration.ino:29:16: error: no matching function for call to 'HardwareSerial::begin()'
   Serial.begin();
                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:154:0,
                 from /tmp/arduino-sketch-483937C563573030843C2D4CE8346E95/sketch/SimpleCalibration.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/HardwareSerial.h:58:10: note: candidate: void HardwareSerial::begin(long unsigned int, uint32_t, int8_t, int8_t, bool, long unsigned int)
     void begin(unsigned long baud, uint32_t config=SERIAL_8N1, int8_t rxPin=-1, int8_t txPin=-1, bool invert=false, unsigned long timeout_ms = 20000UL);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/HardwareSerial.h:58:10: note:   candidate expects 6 arguments, 0 provided