This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.3.0
More details
| Board | Claims compatibility | Inclusion | 08_Speed_Test |
INTERNET_BASED |
04_Brightness |
05_Icons |
06_Wave |
07_Animation |
01_Basic |
02_Scrolling |
03_Millis |
PIXIE_FIRMWARE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL |
Result: PASS
Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes. Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8202 bytes (25%) of program storage space. Maximum is 32256 bytes. Global variables use 222 bytes (10%) of dynamic memory, leaving 1826 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5296 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 236 bytes (11%) of dynamic memory, leaving 1812 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6256 bytes (19%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4474 bytes (13%) of program storage space. Maximum is 32256 bytes. Global variables use 254 bytes (12%) of dynamic memory, leaving 1794 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4800 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 216 bytes (10%) of dynamic memory, leaving 1832 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3610 bytes (11%) of program storage space. Maximum is 32256 bytes. Global variables use 214 bytes (10%) of dynamic memory, leaving 1834 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3434 bytes (10%) of program storage space. Maximum is 32256 bytes. Global variables use 326 bytes (15%) of dynamic memory, leaving 1722 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5654 bytes (17%) of program storage space. Maximum is 32256 bytes. Global variables use 336 bytes (16%) of dynamic memory, leaving 1712 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(int32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(uint32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/examples/01_Basic/01_Basic.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/examples/01_Basic/01_Basic.ino:97:16: error: call of overloaded 'print(int&)' is ambiguous
pix.print(i);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/examples/01_Basic/01_Basic.ino:51:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:72:7: note: candidate: void Pixie::print(char)
void print(char input);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:74:7: note: candidate: void Pixie::print(int16_t)
void print(int16_t input);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:75:7: note: candidate: void Pixie::print(uint16_t)
void print(uint16_t input);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:76:7: note: candidate: void Pixie::print(int32_t)
void print(int32_t input);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:77:7: note: candidate: void Pixie::print(uint32_t)
void print(uint32_t input);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:81:7: note: candidate: void Pixie::print(float, uint8_t)
void print(float input, uint8_t places = 2);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:82:7: note: candidate: void Pixie::print(double, uint8_t)
void print(double input, uint8_t places = 2);
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(int32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(uint32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(int32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(uint32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(int32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(uint32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(int32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(uint32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(int32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(uint32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(int32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(uint32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(int32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:357:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::write(uint32_t, uint8_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:371:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:601:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::print(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:609:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:831:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::push(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:842:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(int32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: error: 'ltoa' was not declared in this scope ltoa(input,char_buf,10); ^~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1014:2: note: suggested alternative: 'utoa' ltoa(input,char_buf,10); ^~~~ utoa /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp: In member function 'void Pixie::shift(uint32_t)': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: error: 'ultoa' was not declared in this scope ultoa(input,char_buf,10); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.cpp:1023:2: note: suggested alternative: 'utoa' ultoa(input,char_buf,10); ^~~~~ utoa
Result: FAIL
Result: FAIL
Result: PASS
Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes. Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 9243 bytes (18%) of program storage space. Maximum is 49152 bytes. Global variables use 199 bytes (3%) of dynamic memory, leaving 5945 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 6363 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 199 bytes (3%) of dynamic memory, leaving 5945 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 7299 bytes (14%) of program storage space. Maximum is 49152 bytes. Global variables use 199 bytes (3%) of dynamic memory, leaving 5945 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 5543 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 199 bytes (3%) of dynamic memory, leaving 5945 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 5869 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 205 bytes (3%) of dynamic memory, leaving 5939 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 4671 bytes (9%) of program storage space. Maximum is 49152 bytes. Global variables use 199 bytes (3%) of dynamic memory, leaving 5945 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 4504 bytes (9%) of program storage space. Maximum is 49152 bytes. Global variables use 319 bytes (5%) of dynamic memory, leaving 5825 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 6515 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 319 bytes (5%) of dynamic memory, leaving 5825 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
Result: FAIL
Result: PASS
Sketch uses 12152 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/examples/01_Basic/01_Basic.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/examples/01_Basic/01_Basic.ino:97:16: error: call of overloaded 'print(int&)' is ambiguous
pix.print(i);
^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/examples/01_Basic/01_Basic.ino:51:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:72:7: note: candidate: void Pixie::print(char)
void print(char input);
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:74:7: note: candidate: void Pixie::print(int16_t)
void print(int16_t input);
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:75:7: note: candidate: void Pixie::print(uint16_t)
void print(uint16_t input);
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:76:7: note: candidate: void Pixie::print(int32_t)
void print(int32_t input);
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:77:7: note: candidate: void Pixie::print(uint32_t)
void print(uint32_t input);
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:81:7: note: candidate: void Pixie::print(float, uint8_t)
void print(float input, uint8_t places = 2);
^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Pixie/src/Pixie.h:82:7: note: candidate: void Pixie::print(double, uint8_t)
void print(double input, uint8_t places = 2);
^~~~~
Result: PASS
Sketch uses 14648 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3012 bytes (9%) of dynamic memory, leaving 29756 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17180 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3012 bytes (9%) of dynamic memory, leaving 29756 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13920 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3012 bytes (9%) of dynamic memory, leaving 29756 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14028 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3028 bytes (9%) of dynamic memory, leaving 29740 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13080 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3028 bytes (9%) of dynamic memory, leaving 29740 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13104 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3140 bytes (9%) of dynamic memory, leaving 29628 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14708 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3140 bytes (9%) of dynamic memory, leaving 29628 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: FAIL
Result: PASS
Sketch uses 201142 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 206730 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13368 bytes (4%) of dynamic memory, leaving 314312 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 205858 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13368 bytes (4%) of dynamic memory, leaving 314312 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 205062 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13368 bytes (4%) of dynamic memory, leaving 314312 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 205186 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13368 bytes (4%) of dynamic memory, leaving 314312 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 205306 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13384 bytes (4%) of dynamic memory, leaving 314296 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 204250 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13384 bytes (4%) of dynamic memory, leaving 314296 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 204246 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13496 bytes (4%) of dynamic memory, leaving 314184 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
<built-in>: fatal error: when writing output to /tmp/arduino-sketch-58D9DD71BB01BA469B019070A0C3D519/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
Result: FAIL