Ponoor PowerSTEP01 Library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Ponoor PowerSTEP01 Library

Version: 1.0.2
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	powerSTEP01SimpleTest_zero	MegunolinkDriverInterface_powerSTEP01_	currentMode	currentMode_zero	powerSTEP01SimpleTest
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	PASS	FAIL	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	PASS	FAIL	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	PASS	FAIL	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	PASS	FAIL	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/MegunolinkDriverInterface_powerSTEP01_

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/MegunolinkDriverInterface_powerSTEP01_/MegunolinkDriverInterface_powerSTEP01_.ino:8:10: fatal error: powerSTEP01ConfigurationStructures.h: No such file or directory
 #include "powerSTEP01ConfigurationStructures.h"
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/currentMode

Result: PASS

Sketch uses 4482 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 272 bytes (13%) of dynamic memory, leaving 1776 bytes for local variables. Maximum is 2048 bytes.

examples/currentMode_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:19: error: 'sercom1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:19: note: suggested alternative: 'strcoll'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
                   strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:48: error: 'SPI_PAD_0_SCK_1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:65: error: 'SERCOM_RX_PAD_3' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:27:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:27:3: note: suggested alternative: 'Serial'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:42:24: error: 'PIO_SERCOM' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                        ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:42:3: error: 'pinPeripheral' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:122:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println("Voltage mode");
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:122:3: note: suggested alternative: 'Serial'
   SerialUSB.println("Voltage mode");
   ^~~~~~~~~
   Serial

examples/powerSTEP01SimpleTest

Result: PASS

Sketch uses 3760 bytes (11%) of program storage space. Maximum is 32256 bytes.
Global variables use 246 bytes (12%) of dynamic memory, leaving 1802 bytes for local variables. Maximum is 2048 bytes.

examples/powerSTEP01SimpleTest_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:19: error: 'sercom1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:19: note: suggested alternative: 'strcoll'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
                   strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:48: error: 'SPI_PAD_0_SCK_1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:65: error: 'SERCOM_RX_PAD_3' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:27:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:27:3: note: suggested alternative: 'Serial'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:42:24: error: 'PIO_SERCOM' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                        ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:42:3: error: 'pinPeripheral' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:109:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println((int)driver.getStatus(), HEX); // print STATUS register
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:109:3: note: suggested alternative: 'Serial'
   SerialUSB.println((int)driver.getStatus(), HEX); // print STATUS register
   ^~~~~~~~~
   Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 80722 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43616 bytes (16%) of dynamic memory, leaving 226720 bytes for local variables. Maximum is 270336 bytes.

examples/MegunolinkDriverInterface_powerSTEP01_

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/MegunolinkDriverInterface_powerSTEP01_/MegunolinkDriverInterface_powerSTEP01_.ino:8:10: fatal error: powerSTEP01ConfigurationStructures.h: No such file or directory
 #include "powerSTEP01ConfigurationStructures.h"
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/currentMode

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode/currentMode.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode/currentMode.ino:38:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/currentMode_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:19: error: 'sercom1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:19: note: suggested alternative: 'strcoll'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
                   strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:48: error: 'SPI_PAD_0_SCK_1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:48: note: suggested alternative: 'SPI_SCK1'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
                                                SPI_SCK1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:65: error: 'SERCOM_RX_PAD_3' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:10: error: cannot declare variable 'altSPI' to be of abstract type 'arduino::HardwareSPI'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
          ^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/src/Ponoor_PowerSTEP01Library.h:8,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:104:7: note:   because the following virtual functions are pure within 'arduino::HardwareSPI':
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:42:24: error: 'PIO_SERCOM' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                        ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:42:3: error: 'pinPeripheral' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:45:10: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
   altSPI.setDataMode(SPI_MODE3);
          ^~~~~~~~~~~

examples/powerSTEP01SimpleTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest/powerSTEP01SimpleTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest/powerSTEP01SimpleTest.ino:38:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/powerSTEP01SimpleTest_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:19: error: 'sercom1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:19: note: suggested alternative: 'strcoll'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
                   strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:48: error: 'SPI_PAD_0_SCK_1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:48: note: suggested alternative: 'SPI_SCK1'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
                                                SPI_SCK1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:65: error: 'SERCOM_RX_PAD_3' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:10: error: cannot declare variable 'altSPI' to be of abstract type 'arduino::HardwareSPI'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
          ^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/src/Ponoor_PowerSTEP01Library.h:8,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:104:7: note:   because the following virtual functions are pure within 'arduino::HardwareSPI':
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:42:24: error: 'PIO_SERCOM' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                        ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:42:3: error: 'pinPeripheral' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:45:10: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
   altSPI.setDataMode(SPI_MODE3);
          ^~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3246 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 40 bytes (0%) of dynamic memory, leaving 6104 bytes for local variables. Maximum is 6144 bytes.

examples/MegunolinkDriverInterface_powerSTEP01_

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/MegunolinkDriverInterface_powerSTEP01_/MegunolinkDriverInterface_powerSTEP01_.ino:8:10: fatal error: powerSTEP01ConfigurationStructures.h: No such file or directory
 #include "powerSTEP01ConfigurationStructures.h"
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/currentMode

Result: PASS

Sketch uses 7809 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 273 bytes (4%) of dynamic memory, leaving 5871 bytes for local variables. Maximum is 6144 bytes.

examples/currentMode_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:19: error: 'sercom1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:19: note: suggested alternative: 'strcoll'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
                   strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:48: error: 'SPI_PAD_0_SCK_1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:48: note: suggested alternative: 'SPI_PRESC_t'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
                                                SPI_PRESC_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:65: error: 'SERCOM_RX_PAD_3' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:27:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:27:3: note: suggested alternative: 'Serial1'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:42:24: error: 'PIO_SERCOM' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                        ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:42:3: error: 'pinPeripheral' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:122:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println("Voltage mode");
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:122:3: note: suggested alternative: 'Serial1'
   SerialUSB.println("Voltage mode");
   ^~~~~~~~~
   Serial1

examples/powerSTEP01SimpleTest

Result: PASS

Sketch uses 7023 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 273 bytes (4%) of dynamic memory, leaving 5871 bytes for local variables. Maximum is 6144 bytes.

examples/powerSTEP01SimpleTest_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:19: error: 'sercom1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:19: note: suggested alternative: 'strcoll'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^~~~~~~
                   strcoll
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:48: error: 'SPI_PAD_0_SCK_1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:48: note: suggested alternative: 'SPI_PRESC_t'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^~~~~~~~~~~~~~~
                                                SPI_PRESC_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:65: error: 'SERCOM_RX_PAD_3' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                 ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:27:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:27:3: note: suggested alternative: 'Serial1'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:42:24: error: 'PIO_SERCOM' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                        ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:42:3: error: 'pinPeripheral' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:109:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println((int)driver.getStatus(), HEX); // print STATUS register
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:109:3: note: suggested alternative: 'Serial1'
   SerialUSB.println((int)driver.getStatus(), HEX); // print STATUS register
   ^~~~~~~~~
   Serial1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 13336 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3068 bytes (9%) of dynamic memory, leaving 29700 bytes for local variables. Maximum is 32768 bytes.

examples/MegunolinkDriverInterface_powerSTEP01_

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/MegunolinkDriverInterface_powerSTEP01_/MegunolinkDriverInterface_powerSTEP01_.ino:8:10: fatal error: powerSTEP01ConfigurationStructures.h: No such file or directory
 #include "powerSTEP01ConfigurationStructures.h"
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/currentMode

Result: PASS

Sketch uses 21892 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3108 bytes (9%) of dynamic memory, leaving 29660 bytes for local variables. Maximum is 32768 bytes.

examples/currentMode_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:80: error: no matching function for call to 'arduino::HardwareSPI::HardwareSPI(SERCOM*, int, int, int, SercomSpiTXPad, SercomRXPad)'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/src/Ponoor_PowerSTEP01Library.h:8,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note: candidate: constexpr arduino::HardwareSPI::HardwareSPI()
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note:   candidate expects 0 arguments, 6 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note: candidate: constexpr arduino::HardwareSPI::HardwareSPI(const arduino::HardwareSPI&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note:   candidate expects 1 argument, 6 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:10: error: cannot declare variable 'altSPI' to be of abstract type 'arduino::HardwareSPI'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
          ^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/src/Ponoor_PowerSTEP01Library.h:8,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note:   because the following virtual functions are pure within 'arduino::HardwareSPI':
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:45:10: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
   altSPI.setDataMode(SPI_MODE3);
          ^~~~~~~~~~~

examples/powerSTEP01SimpleTest

Result: PASS

Sketch uses 21804 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3108 bytes (9%) of dynamic memory, leaving 29660 bytes for local variables. Maximum is 32768 bytes.

examples/powerSTEP01SimpleTest_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:80: error: no matching function for call to 'arduino::HardwareSPI::HardwareSPI(SERCOM*, int, int, int, SercomSpiTXPad, SercomRXPad)'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/src/Ponoor_PowerSTEP01Library.h:8,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note: candidate: constexpr arduino::HardwareSPI::HardwareSPI()
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note:   candidate expects 0 arguments, 6 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note: candidate: constexpr arduino::HardwareSPI::HardwareSPI(const arduino::HardwareSPI&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note:   candidate expects 1 argument, 6 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:10: error: cannot declare variable 'altSPI' to be of abstract type 'arduino::HardwareSPI'
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
          ^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/src/Ponoor_PowerSTEP01Library.h:8,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note:   because the following virtual functions are pure within 'arduino::HardwareSPI':
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:45:10: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
   altSPI.setDataMode(SPI_MODE3);
          ^~~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 200724 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13136 bytes (4%) of dynamic memory, leaving 314544 bytes for local variables. Maximum is 327680 bytes.

examples/MegunolinkDriverInterface_powerSTEP01_

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/MegunolinkDriverInterface_powerSTEP01_/MegunolinkDriverInterface_powerSTEP01_.ino:8:48: fatal error: powerSTEP01ConfigurationStructures.h: No such file or directory
compilation terminated.

examples/currentMode

Result: PASS

Sketch uses 212594 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13544 bytes (4%) of dynamic memory, leaving 314136 bytes for local variables. Maximum is 327680 bytes.

examples/currentMode_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:19: error: 'sercom1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:48: error: 'SPI_PAD_0_SCK_1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:12:65: error: 'SERCOM_RX_PAD_3' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:27:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:42:24: error: 'PIO_SERCOM' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:42:34: error: 'pinPeripheral' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/currentMode_zero/currentMode_zero.ino:122:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println("Voltage mode");
   ^

examples/powerSTEP01SimpleTest

Result: PASS

Sketch uses 212410 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13544 bytes (4%) of dynamic memory, leaving 314136 bytes for local variables. Maximum is 327680 bytes.

examples/powerSTEP01SimpleTest_zero

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:19: error: 'sercom1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:48: error: 'SPI_PAD_0_SCK_1' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:12:65: error: 'SERCOM_RX_PAD_3' was not declared in this scope
 SPIClass altSPI (&sercom1, MISO1, SCK1, MOSI1, SPI_PAD_0_SCK_1, SERCOM_RX_PAD_3);
                                                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:27:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:42:24: error: 'PIO_SERCOM' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:42:34: error: 'pinPeripheral' was not declared in this scope
   pinPeripheral(MOSI1, PIO_SERCOM);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ponoor_PowerSTEP01_Library/examples/powerSTEP01SimpleTest_zero/powerSTEP01SimpleTest_zero.ino:109:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println((int)driver.getStatus(), HEX); // print STATUS register
   ^