This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.2.0
More details
| Board | Claims compatibility | Inclusion | Example-4-OpenOx-board-ArduinoPlotter |
Example-1-Raw-PPG-plot-openview |
Example-2-computed-spo2 |
Example-3-Raw-PPG-plot-Arduino-Plotter |
|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 628 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 17 bytes (0%) of dynamic memory, leaving 2031 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7290 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 1662 bytes (81%) of dynamic memory, leaving 386 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
Sketch uses 7516 bytes (23%) of program storage space. Maximum is 32256 bytes. Global variables use 1722 bytes (84%) of dynamic memory, leaving 326 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
Sketch uses 7146 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 1644 bytes (80%) of dynamic memory, leaving 404 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
Sketch uses 7146 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 1644 bytes (80%) of dynamic memory, leaving 404 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
Sketch uses 80722 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43616 bytes (16%) of dynamic memory, leaving 226720 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-1-Raw-PPG-plot-openview/Example-1-Raw-PPG-plot-openview.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-1-Raw-PPG-plot-openview/Example-1-Raw-PPG-plot-openview.ino:79:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-1-Raw-PPG-plot-openview/Example-1-Raw-PPG-plot-openview.ino:79:24: error: 'SPI_CLOCK_DIV8' was not declared in this scope
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-1-Raw-PPG-plot-openview/Example-1-Raw-PPG-plot-openview.ino:79:24: note: suggested alternative: 'SPI_CPOL_1'
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-1-Raw-PPG-plot-openview/Example-1-Raw-PPG-plot-openview.ino:80:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
SPI.setDataMode (SPI_MODE0); //Set SPI mode as 0
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-1-Raw-PPG-plot-openview/Example-1-Raw-PPG-plot-openview.ino:81:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
SPI.setBitOrder (MSBFIRST); //MSB first
^~~~~~~~~~~
Multiple libraries were found for "Protocentral_AFE4490_Oximeter.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_HealthyPi_v4_Library
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-2-computed-spo2/Example-2-computed-spo2.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-2-computed-spo2/Example-2-computed-spo2.ino:39:8: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-2-computed-spo2/Example-2-computed-spo2.ino:39:25: error: 'SPI_CLOCK_DIV8' was not declared in this scope
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-2-computed-spo2/Example-2-computed-spo2.ino:39:25: note: suggested alternative: 'SPI_CPOL_1'
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-2-computed-spo2/Example-2-computed-spo2.ino:40:8: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
SPI.setDataMode (SPI_MODE0); //Set SPI mode as 0
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-2-computed-spo2/Example-2-computed-spo2.ino:41:8: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
SPI.setBitOrder (MSBFIRST); //MSB first
^~~~~~~~~~~
Multiple libraries were found for "Protocentral_AFE4490_Oximeter.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_HealthyPi_v4_Library
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-3-Raw-PPG-plot-Arduino-Plotter/Example-3-Raw-PPG-plot-Arduino-Plotter.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-3-Raw-PPG-plot-Arduino-Plotter/Example-3-Raw-PPG-plot-Arduino-Plotter.ino:39:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-3-Raw-PPG-plot-Arduino-Plotter/Example-3-Raw-PPG-plot-Arduino-Plotter.ino:39:24: error: 'SPI_CLOCK_DIV8' was not declared in this scope
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-3-Raw-PPG-plot-Arduino-Plotter/Example-3-Raw-PPG-plot-Arduino-Plotter.ino:39:24: note: suggested alternative: 'SPI_CPOL_1'
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-3-Raw-PPG-plot-Arduino-Plotter/Example-3-Raw-PPG-plot-Arduino-Plotter.ino:40:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
SPI.setDataMode (SPI_MODE0); //Set SPI mode as 0
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-3-Raw-PPG-plot-Arduino-Plotter/Example-3-Raw-PPG-plot-Arduino-Plotter.ino:41:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
SPI.setBitOrder (MSBFIRST); //MSB first
^~~~~~~~~~~
Multiple libraries were found for "Protocentral_AFE4490_Oximeter.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_HealthyPi_v4_Library
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-4-OpenOx-board-ArduinoPlotter/Example-4-OpenOx-board-ArduinoPlotter.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-4-OpenOx-board-ArduinoPlotter/Example-4-OpenOx-board-ArduinoPlotter.ino:34:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-4-OpenOx-board-ArduinoPlotter/Example-4-OpenOx-board-ArduinoPlotter.ino:34:24: error: 'SPI_CLOCK_DIV8' was not declared in this scope
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-4-OpenOx-board-ArduinoPlotter/Example-4-OpenOx-board-ArduinoPlotter.ino:34:24: note: suggested alternative: 'SPI_CPOL_1'
SPI.setClockDivider (SPI_CLOCK_DIV8); // set Speed as 2MHz , 16MHz/ClockDiv
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-4-OpenOx-board-ArduinoPlotter/Example-4-OpenOx-board-ArduinoPlotter.ino:35:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
SPI.setDataMode (SPI_MODE0); //Set SPI mode as 0
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library/examples/Example-4-OpenOx-board-ArduinoPlotter/Example-4-OpenOx-board-ArduinoPlotter.ino:36:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
SPI.setBitOrder (MSBFIRST); //MSB first
^~~~~~~~~~~
Multiple libraries were found for "Protocentral_AFE4490_Oximeter.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_AFE4490_PPG_and_SpO2_boards_library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ProtoCentral_HealthyPi_v4_Library
Result: PASS
Sketch uses 3798 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 140 bytes (2%) of dynamic memory, leaving 6004 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 10837 bytes (22%) of program storage space. Maximum is 49152 bytes. Global variables use 1696 bytes (27%) of dynamic memory, leaving 4448 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 11051 bytes (22%) of program storage space. Maximum is 49152 bytes. Global variables use 1686 bytes (27%) of dynamic memory, leaving 4458 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 10693 bytes (21%) of program storage space. Maximum is 49152 bytes. Global variables use 1678 bytes (27%) of dynamic memory, leaving 4466 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 10693 bytes (21%) of program storage space. Maximum is 49152 bytes. Global variables use 1678 bytes (27%) of dynamic memory, leaving 4466 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 13396 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3208 bytes (9%) of dynamic memory, leaving 29560 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17196 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4472 bytes (13%) of dynamic memory, leaving 28296 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17344 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4456 bytes (13%) of dynamic memory, leaving 28312 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17164 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4448 bytes (13%) of dynamic memory, leaving 28320 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17164 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4448 bytes (13%) of dynamic memory, leaving 28320 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 198682 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13128 bytes (4%) of dynamic memory, leaving 314552 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210474 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 15256 bytes (4%) of dynamic memory, leaving 312424 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210406 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 15240 bytes (4%) of dynamic memory, leaving 312440 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210218 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 15232 bytes (4%) of dynamic memory, leaving 312448 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 210218 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 15232 bytes (4%) of dynamic memory, leaving 312448 bytes for local variables. Maximum is 327680 bytes.