PyDuinoBridge - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

PyDuinoBridge

Version: 1.0.0
More details

Compatibility matrix

arduino_example

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/arduino_example

Result: PASS

Sketch uses 7258 bytes (22%) of program storage space. Maximum is 32256 bytes.
Global variables use 469 bytes (22%) of dynamic memory, leaving 1579 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library PyDuinoBridge claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/arduino_example

Result: FAIL

WARNING: library PyDuinoBridge claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino:113:78: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
   myBridge.write_HeaderAndTwoArrays(ledName, arrX, 3, myBridge.floatsRecvd, 1);
                                                                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino:34:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/src/pyduino_bridge.h:63:10: note:   initializing argument 1 of 'void Bridge_ino::write_HeaderAndTwoArrays(char*, int*, int, float*, int)'
     void write_HeaderAndTwoArrays(char* header, int arrInts[], int numInts, float arrayFloats[], int numFloats);
          ^~~~~~~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library PyDuinoBridge claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/arduino_example

Result: PASS

WARNING: library PyDuinoBridge claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 8088 bytes (16%) of program storage space. Maximum is 49152 bytes.
Global variables use 396 bytes (6%) of dynamic memory, leaving 5748 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library PyDuinoBridge claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/arduino_example

Result: FAIL

WARNING: library PyDuinoBridge claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino:113:78: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
   myBridge.write_HeaderAndTwoArrays(ledName, arrX, 3, myBridge.floatsRecvd, 1);
                                                                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino:34:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/src/pyduino_bridge.h:63:10: note:   initializing argument 1 of 'void Bridge_ino::write_HeaderAndTwoArrays(char*, int*, int, float*, int)'
     void write_HeaderAndTwoArrays(char* header, int arrInts[], int numInts, float arrayFloats[], int numFloats);
          ^~~~~~~~~~~~~~~~~~~~~~~~
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library PyDuinoBridge claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 197866 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13100 bytes (3%) of dynamic memory, leaving 314580 bytes for local variables. Maximum is 327680 bytes.

examples/arduino_example

Result: FAIL

WARNING: library PyDuinoBridge claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino:113:78: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
   myBridge.write_HeaderAndTwoArrays(ledName, arrX, 3, myBridge.floatsRecvd, 1);
                                                                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/examples/arduino_example/arduino_example.ino:34:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PyDuinoBridge/src/pyduino_bridge.h:63:10: note:   initializing argument 1 of 'void Bridge_ino::write_HeaderAndTwoArrays(char*, int*, int, float*, int)'
     void write_HeaderAndTwoArrays(char* header, int arrInts[], int numInts, float arrayFloats[], int numFloats);
          ^
Multiple libraries were found for "Servo.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo