RAKwireless ADS7830 library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

RAKwireless ADS7830 library

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	RAK16001_SingleEnded	RAK16001_Differential
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/RAK16001_Differential

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:20:3: error: 'time_t' was not declared in this scope
   time_t timeout = millis();
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:20:3: note: suggested alternative: 'size_t'
   time_t timeout = millis();
   ^~~~~~
   size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:21:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:26:21: error: 'timeout' was not declared in this scope
     if ((millis() - timeout) < 5000)
                     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:77:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between channels 0 and 1: %0.2fV\r\n", result01);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:79:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 1 and 0: %0.2fV\r\n", result10);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:81:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 2 and 3: %0.2fV\r\n", result23);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:83:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 3 and 2: %0.2fV\r\n", result32);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:85:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 4 and 5: %0.2fV\r\n", result45);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:87:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 5 and 4: %0.2fV\r\n", result54);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:89:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 6 and 7: %0.2fV\r\n", result67);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:91:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 7 and 6: %0.2fV\r\n", result76);
            ^~~~~~
            print

examples/RAK16001_SingleEnded

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:18:3: error: 'time_t' was not declared in this scope
   time_t timeout = millis();
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:18:3: note: suggested alternative: 'size_t'
   time_t timeout = millis();
   ^~~~~~
   size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:19:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:24:21: error: 'timeout' was not declared in this scope
     if ((millis() - timeout) < 5000)
                     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:75:14: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Analog input voltage values between Channel %d: %0.2f\r\n", channelcount, result[channelcount]);
              ^~~~~~
              print

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/RAK16001_Differential

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:21:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:21:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:77:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between channels 0 and 1: %0.2fV\r\n", result01);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:79:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 1 and 0: %0.2fV\r\n", result10);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:81:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 2 and 3: %0.2fV\r\n", result23);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:83:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 3 and 2: %0.2fV\r\n", result32);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:85:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 4 and 5: %0.2fV\r\n", result45);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:87:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 5 and 4: %0.2fV\r\n", result54);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:89:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 6 and 7: %0.2fV\r\n", result67);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:91:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 7 and 6: %0.2fV\r\n", result76);
            ^~~~~~
            print

examples/RAK16001_SingleEnded

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:19:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:19:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:75:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Analog input voltage values between Channel %d: %0.2f\r\n", channelcount, result[channelcount]);
              ^~~~~~
              print

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/src/ADS7830.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/src/ADS7830.cpp:12:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'uint8_t readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/RAK16001_Differential

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:20:3: error: 'time_t' was not declared in this scope
   time_t timeout = millis();
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:20:3: note: suggested alternative: 'size_t'
   time_t timeout = millis();
   ^~~~~~
   size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:21:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:21:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:26:21: error: 'timeout' was not declared in this scope
     if ((millis() - timeout) < 5000)
                     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:77:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between channels 0 and 1: %0.2fV\r\n", result01);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:79:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 1 and 0: %0.2fV\r\n", result10);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:81:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 2 and 3: %0.2fV\r\n", result23);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:83:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 3 and 2: %0.2fV\r\n", result32);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:85:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 4 and 5: %0.2fV\r\n", result45);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:87:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 5 and 4: %0.2fV\r\n", result54);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:89:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 6 and 7: %0.2fV\r\n", result67);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:91:12: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 7 and 6: %0.2fV\r\n", result76);
            ^~~~~~
            print

examples/RAK16001_SingleEnded

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:18:3: error: 'time_t' was not declared in this scope
   time_t timeout = millis();
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:18:3: note: suggested alternative: 'size_t'
   time_t timeout = millis();
   ^~~~~~
   size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:19:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:19:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:24:21: error: 'timeout' was not declared in this scope
     if ((millis() - timeout) < 5000)
                     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:75:14: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Analog input voltage values between Channel %d: %0.2f\r\n", channelcount, result[channelcount]);
              ^~~~~~
              print

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/RAK16001_Differential

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:21:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:21:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:77:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between channels 0 and 1: %0.2fV\r\n", result01);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:79:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 1 and 0: %0.2fV\r\n", result10);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:81:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 2 and 3: %0.2fV\r\n", result23);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:83:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 3 and 2: %0.2fV\r\n", result32);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:85:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 4 and 5: %0.2fV\r\n", result45);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:87:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 5 and 4: %0.2fV\r\n", result54);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:89:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 6 and 7: %0.2fV\r\n", result67);
            ^~~~~~
            print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:91:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("Analog input voltage values between Channels 7 and 6: %0.2fV\r\n", result76);
            ^~~~~~
            print

examples/RAK16001_SingleEnded

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:19:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:19:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:75:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
       Serial.printf("Analog input voltage values between Channel %d: %0.2f\r\n", channelcount, result[channelcount]);
              ^~~~~~
              print

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 202490 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/RAK16001_Differential

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_Differential/RAK16001_Differential.ino:21:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/RAK16001_SingleEnded

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_ADS7830_library/examples/RAK16001_SingleEnded/RAK16001_SingleEnded.ino:19:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^