This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.2
More details
| Board | Claims compatibility | Inclusion | Example07_SetSensitivity |
Example08_setMultiTouchDisabled |
Example01_BasicReading |
Example03_DetectSwipe |
Example04_PowerButton |
Example05_SetRepeatRateEnabled |
Example06_DisableInterrupt |
Example02_DetectAnyTouch |
Example09_setReleaseInterruptEnabled |
Example10_setMTPEnabled |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | FAIL | PASS | PASS | FAIL | FAIL | FAIL | PASS | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | FAIL | PASS | PASS | FAIL | FAIL | FAIL | PASS | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | FAIL | PASS | PASS | FAIL | FAIL | FAIL | PASS | FAIL | FAIL |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example01_BasicReading/Example01_BasicReading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example01_BasicReading/Example01_BasicReading.ino:21:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example01_BasicReading/Example01_BasicReading.ino:21:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example01_BasicReading/Example01_BasicReading.ino:24:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example02_DetectAnyTouch/Example02_DetectAnyTouch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example02_DetectAnyTouch/Example02_DetectAnyTouch.ino:20:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example02_DetectAnyTouch/Example02_DetectAnyTouch.ino:20:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example02_DetectAnyTouch/Example02_DetectAnyTouch.ino:23:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example03_DetectSwipe/Example03_DetectSwipe.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example03_DetectSwipe/Example03_DetectSwipe.ino:20:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example03_DetectSwipe/Example03_DetectSwipe.ino:20:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example03_DetectSwipe/Example03_DetectSwipe.ino:23:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example07_SetSensitivity/Example07_SetSensitivity.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example07_SetSensitivity/Example07_SetSensitivity.ino:20:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example07_SetSensitivity/Example07_SetSensitivity.ino:20:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example07_SetSensitivity/Example07_SetSensitivity.ino:23:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:28:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:28:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:31:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: PASS
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82634 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82488 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82834 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: PASS
Sketch uses 82622 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: PASS
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/src/CAP1293.cpp:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'byte CAP1293::readRegister(CAP1293_Register)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void CAP1293::readRegisters(CAP1293_Register, byte*, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example01_BasicReading/Example01_BasicReading.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example01_BasicReading/Example01_BasicReading.ino:21:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example01_BasicReading/Example01_BasicReading.ino:21:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example01_BasicReading/Example01_BasicReading.ino:24:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example02_DetectAnyTouch/Example02_DetectAnyTouch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example02_DetectAnyTouch/Example02_DetectAnyTouch.ino:20:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example02_DetectAnyTouch/Example02_DetectAnyTouch.ino:20:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example02_DetectAnyTouch/Example02_DetectAnyTouch.ino:23:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example03_DetectSwipe/Example03_DetectSwipe.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example03_DetectSwipe/Example03_DetectSwipe.ino:20:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example03_DetectSwipe/Example03_DetectSwipe.ino:20:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example03_DetectSwipe/Example03_DetectSwipe.ino:23:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example07_SetSensitivity/Example07_SetSensitivity.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example07_SetSensitivity/Example07_SetSensitivity.ino:20:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example07_SetSensitivity/Example07_SetSensitivity.ino:20:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example07_SetSensitivity/Example07_SetSensitivity.ino:23:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:29:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:29:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:32:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:28:3: error: 'time_t' was not declared in this scope
time_t timeout = millis();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:28:3: note: suggested alternative: 'size_t'
time_t timeout = millis();
^~~~~~
size_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:31:21: error: 'timeout' was not declared in this scope
if ((millis() - timeout) < 5000)
^~~~~~~
Result: PASS
Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14712 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3576 bytes (10%) of dynamic memory, leaving 29192 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14560 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3576 bytes (10%) of dynamic memory, leaving 29192 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14920 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3576 bytes (10%) of dynamic memory, leaving 29192 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: PASS
Sketch uses 14824 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3576 bytes (10%) of dynamic memory, leaving 29192 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:16:37: note: suggested alternative: '__IOM'
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^~~~~~
__IOM
Result: PASS
Sketch uses 203450 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215086 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 214922 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215350 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example04_PowerButton/Example04_PowerButton.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example05_SetRepeatRateEnabled/Example05_SetRepeatRateEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example06_DisableInterrupt/Example06_DisableInterrupt.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^
Result: PASS
Sketch uses 215102 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example08_setMultiTouchDisabled/Example08_setMultiTouchDisabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example09_setReleaseInterruptEnabled/Example09_setReleaseInterruptEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_CAP1293_Touch_Pad_library/examples/Example10_setMTPEnabled/Example10_setMTPEnabled.ino:16:37: error: 'WB_IO6' was not declared in this scope
static const int8_t gInterruptPin = WB_IO6; // interrupt pin
^