RAKwireless RAK13600 RFID library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

RAKwireless RAK13600 RFID library

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	mifareclassic_ndeftoclassic	ntag2xx_erase	ntag2xx_read	readMifareClassic	readandwriteMifare	FeliCa_card_detection	iso14443a_uid	mifareclassic_formatndef	mifareclassic_memdump	mifareclassic_updatendef	ntag2xx_updatendef	FeliCa_card_read	iso14443b_uid
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 2522 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 297 bytes (14%) of dynamic memory, leaving 1751 bytes for local variables. Maximum is 2048 bytes.

examples/FeliCa_card_detection

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/FeliCa_card_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:33:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/iso14443a_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/iso14443b_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/mifareclassic_formatndef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/mifareclassic_memdump

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/mifareclassic_ndeftoclassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:42:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/mifareclassic_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:43:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/ntag2xx_erase

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/ntag2xx_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:18:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:19:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/ntag2xx_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/readMifareClassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:24:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

examples/readandwriteMifare

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 83608 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44392 bytes (16%) of dynamic memory, leaving 225944 bytes for local variables. Maximum is 270336 bytes.

examples/FeliCa_card_detection

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:28:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/FeliCa_card_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:15:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:33:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:33:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/iso14443a_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:18:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/iso14443b_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:18:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/mifareclassic_formatndef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:44:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/mifareclassic_memdump

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:15:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/mifareclassic_ndeftoclassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:15:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:42:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:42:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/mifareclassic_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:15:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:43:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:43:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/ntag2xx_erase

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/ntag2xx_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:18:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:18:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:19:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:19:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:28:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/ntag2xx_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:18:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:44:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/readMifareClassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:24:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:24:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/readandwriteMifare

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 6966 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 490 bytes (7%) of dynamic memory, leaving 5654 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/src/RAK13600-PN532.cpp:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void NFC_PN532::readdata(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/FeliCa_card_detection

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:28:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/FeliCa_card_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:33:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:33:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/iso14443a_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:25:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/iso14443b_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:25:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/mifareclassic_formatndef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:44:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/mifareclassic_memdump

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:25:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/mifareclassic_ndeftoclassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:42:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:42:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/mifareclassic_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:43:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:43:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/ntag2xx_erase

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:25:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/ntag2xx_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:18:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:19:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:28:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/ntag2xx_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:44:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/readMifareClassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:24:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:24:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

examples/readandwriteMifare

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:25:11: note: suggested alternative: 'GPIO2'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           GPIO2

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 14776 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3656 bytes (11%) of dynamic memory, leaving 29112 bytes for local variables. Maximum is 32768 bytes.

examples/FeliCa_card_detection

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:28:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/FeliCa_card_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:15:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:33:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:33:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/iso14443a_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:18:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/iso14443b_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:18:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/mifareclassic_formatndef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:44:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/mifareclassic_memdump

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:15:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/mifareclassic_ndeftoclassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:15:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:42:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:42:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/mifareclassic_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:15:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:43:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:43:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/ntag2xx_erase

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/ntag2xx_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:18:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:18:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:19:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:19:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:28:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/ntag2xx_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:18:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:44:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/readMifareClassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:24:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:24:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

examples/readandwriteMifare

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:16:22: note: suggested alternative: '__IOM'
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:17:22: note: suggested alternative: '__IOM'
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:25:11: note: suggested alternative: '__IOM'
   pinMode(WB_IO2, OUTPUT);
           ^~~~~~
           __IOM

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 206602 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14016 bytes (4%) of dynamic memory, leaving 313664 bytes for local variables. Maximum is 327680 bytes.

examples/FeliCa_card_detection

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_detection/FeliCa_card_detection.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/FeliCa_card_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/FeliCa_card_read/FeliCa_card_read.ino:33:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/iso14443a_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443a_uid/iso14443a_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/iso14443b_uid

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/iso14443b_uid/iso14443b_uid.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/mifareclassic_formatndef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_formatndef/mifareclassic_formatndef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/mifareclassic_memdump

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_memdump/mifareclassic_memdump.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/mifareclassic_ndeftoclassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_ndeftoclassic/mifareclassic_ndeftoclassic.ino:42:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/mifareclassic_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:15:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:16:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:19:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/mifareclassic_updatendef/mifareclassic_updatendef.ino:43:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/ntag2xx_erase

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_erase/ntag2xx_erase.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/ntag2xx_read

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:18:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:19:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:22:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_read/ntag2xx_read.ino:28:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/ntag2xx_updatendef

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:17:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:18:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:21:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/ntag2xx_updatendef/ntag2xx_updatendef.ino:44:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/readMifareClassic

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readMifareClassic/readMifareClassic.ino:24:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^

examples/readandwriteMifare

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:16:22: error: 'WB_IO6' was not declared in this scope
 #define PN532_IRQ   (WB_IO6)
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:15: note: in expansion of macro 'PN532_IRQ'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:17:22: error: 'WB_IO5' was not declared in this scope
 #define PN532_RESET (WB_IO5)  // Not connected by default on the NFC Shield
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:20:26: note: in expansion of macro 'PN532_RESET'
 NFC_PN532 nfc(PN532_IRQ, PN532_RESET);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RAKwireless_RAK13600_RFID_library/examples/readandwriteMifare/readandwriteMifare.ino:25:11: error: 'WB_IO2' was not declared in this scope
   pinMode(WB_IO2, OUTPUT);
           ^