RS485HwSerial - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

RS485HwSerial

Version: 1.1.2
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	RS485SerialPassthroughTest
arduino:avr:uno 1.8.4	Yes	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1650 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 185 bytes (9%) of dynamic memory, leaving 1863 bytes for local variables. Maximum is 2048 bytes.

examples/RS485SerialPassthroughTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:116:3: error: 'RS485HwSerial1' was not declared in this scope
   RS485HwSerial1.transmitterEnable(RS485_TE);
   ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:116:3: note: suggested alternative: 'RS485HwSerial0'
   RS485HwSerial1.transmitterEnable(RS485_TE);
   ^~~~~~~~~~~~~~
   RS485HwSerial0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:132:5: error: 'RS485HwSerial1' was not declared in this scope
     RS485HwSerial1.write(RS485HwSerial0.read());   // read it in and send it out on serial1
     ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:132:5: note: suggested alternative: 'RS485HwSerial0'
     RS485HwSerial1.write(RS485HwSerial0.read());   // read it in and send it out on serial1
     ^~~~~~~~~~~~~~
     RS485HwSerial0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:135:7: error: 'RS485HwSerial1' was not declared in this scope
   if (RS485HwSerial1.available()) {                // any data incoming on serial1,
       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:135:7: note: suggested alternative: 'RS485HwSerial0'
   if (RS485HwSerial1.available()) {                // any data incoming on serial1,
       ^~~~~~~~~~~~~~
       RS485HwSerial0

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/src/RS485HwSerial.cpp:30:10: fatal error: util/atomic.h: No such file or directory
 #include <util/atomic.h>
          ^~~~~~~~~~~~~~~
compilation terminated.

examples/RS485SerialPassthroughTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/src/RS485HwSerial.cpp:30:10: fatal error: util/atomic.h: No such file or directory
 #include <util/atomic.h>
          ^~~~~~~~~~~~~~~
compilation terminated.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library RS485HwSerial claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/RS485SerialPassthroughTest

Result: FAIL

WARNING: library RS485HwSerial claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:113:3: error: 'RS485HwSerial0' was not declared in this scope
   RS485HwSerial0.begin(RS232_BPS);
   ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:113:3: note: suggested alternative: 'RS485HwSerial'
   RS485HwSerial0.begin(RS232_BPS);
   ^~~~~~~~~~~~~~
   RS485HwSerial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:116:3: error: 'RS485HwSerial1' was not declared in this scope
   RS485HwSerial1.transmitterEnable(RS485_TE);
   ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:116:3: note: suggested alternative: 'RS485HwSerial'
   RS485HwSerial1.transmitterEnable(RS485_TE);
   ^~~~~~~~~~~~~~
   RS485HwSerial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:131:7: error: 'RS485HwSerial0' was not declared in this scope
   if (RS485HwSerial0.available()) {                // any data incoming on serial0,
       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:131:7: note: suggested alternative: 'RS485HwSerial'
   if (RS485HwSerial0.available()) {                // any data incoming on serial0,
       ^~~~~~~~~~~~~~
       RS485HwSerial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:132:5: error: 'RS485HwSerial1' was not declared in this scope
     RS485HwSerial1.write(RS485HwSerial0.read());   // read it in and send it out on serial1
     ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:132:5: note: suggested alternative: 'RS485HwSerial'
     RS485HwSerial1.write(RS485HwSerial0.read());   // read it in and send it out on serial1
     ^~~~~~~~~~~~~~
     RS485HwSerial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:135:7: error: 'RS485HwSerial1' was not declared in this scope
   if (RS485HwSerial1.available()) {                // any data incoming on serial1,
       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:135:7: note: suggested alternative: 'RS485HwSerial'
   if (RS485HwSerial1.available()) {                // any data incoming on serial1,
       ^~~~~~~~~~~~~~
       RS485HwSerial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:136:5: error: 'RS485HwSerial0' was not declared in this scope
     RS485HwSerial0.write(RS485HwSerial1.read());   // read it in and send it out on serial0
     ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/examples/RS485SerialPassthroughTest/RS485SerialPassthroughTest.ino:136:5: note: suggested alternative: 'RS485HwSerial'
     RS485HwSerial0.write(RS485HwSerial1.read());   // read it in and send it out on serial0
     ^~~~~~~~~~~~~~
     RS485HwSerial

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/src/RS485HwSerial.cpp:30:10: fatal error: util/atomic.h: No such file or directory
 #include <util/atomic.h>
          ^~~~~~~~~~~~~~~
compilation terminated.

examples/RS485SerialPassthroughTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/src/RS485HwSerial.cpp:30:10: fatal error: util/atomic.h: No such file or directory
 #include <util/atomic.h>
          ^~~~~~~~~~~~~~~
compilation terminated.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/src/RS485HwSerial.cpp:30:25: fatal error: util/atomic.h: No such file or directory
compilation terminated.

examples/RS485SerialPassthroughTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RS485HwSerial/src/RS485HwSerial.cpp:30:25: fatal error: util/atomic.h: No such file or directory
compilation terminated.