RTC RV-3028-C7 Arduino Library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

RTC RV-3028-C7 Arduino Library

Version: 2.1.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Example1-SetPrint_Time	Example2-SetPrint_UNIXTime	Example3-Trickle_Charging	Example4-Alarm_Interrupt	Example5-BackupSwitchoverMode
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/Example1-SetPrint_Time

Result: PASS

Sketch uses 8848 bytes (27%) of program storage space. Maximum is 32256 bytes.
Global variables use 748 bytes (36%) of dynamic memory, leaving 1300 bytes for local variables. Maximum is 2048 bytes.

examples/Example2-SetPrint_UNIXTime

Result: PASS

Sketch uses 8888 bytes (27%) of program storage space. Maximum is 32256 bytes.
Global variables use 748 bytes (36%) of dynamic memory, leaving 1300 bytes for local variables. Maximum is 2048 bytes.

examples/Example3-Trickle_Charging

Result: PASS

Sketch uses 5146 bytes (15%) of program storage space. Maximum is 32256 bytes.
Global variables use 545 bytes (26%) of dynamic memory, leaving 1503 bytes for local variables. Maximum is 2048 bytes.

examples/Example4-Alarm_Interrupt

Result: PASS

Sketch uses 9018 bytes (27%) of program storage space. Maximum is 32256 bytes.
Global variables use 706 bytes (34%) of dynamic memory, leaving 1342 bytes for local variables. Maximum is 2048 bytes.

examples/Example5-BackupSwitchoverMode

Result: PASS

Sketch uses 5184 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 551 bytes (26%) of dynamic memory, leaving 1497 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/Example1-SetPrint_Time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:33:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:33:3: note: suggested alternative: 'time'
   Wire.begin();
   ^~~~
   time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:34:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:46:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:59:13: error: 'rtc' was not declared in this scope
         if (rtc.setToCompilerTime() == false) {
             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:68:9: error: 'rtc' was not declared in this scope
         rtc.set12Hour();
         ^~~
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example2-SetPrint_UNIXTime

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:17:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:28:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:28:3: note: suggested alternative: 'time'
   Wire.begin();
   ^~~~
   time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:29:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:40:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:55:13: error: 'rtc' was not declared in this scope
         if (rtc.setUNIX(UNIX) == false) {
             ^~~
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example3-Trickle_Charging

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:24:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:24:3: note: suggested alternative: 'time'
   Wire.begin();
   ^~~~
   time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:25:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:35:18: error: 'rtc' was not declared in this scope
   Serial.println(rtc.readConfigEEPROM_RAMmirror(0x37));
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:37:27: error: 'TCR_3K' was not declared in this scope
   rtc.enableTrickleCharge(TCR_3K);   //series resistor 3kOhm
                           ^~~~~~
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example4-Alarm_Interrupt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:51:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:51:3: note: suggested alternative: 'time'
   Wire.begin();
   ^~~~
   time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:52:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:61:3: error: 'rtc' was not declared in this scope
   rtc.enableAlarmInterrupt(alm_minute, alm_hour, alm_date_or_weekday, alm_isweekday, alm_mode);
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:68:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:77:7: error: 'rtc' was not declared in this scope
   if (rtc.readAlarmInterruptFlag()) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:92:13: error: 'rtc' was not declared in this scope
         if (rtc.setTime(sec, minute, hour, day, date, month, year) == false) {
             ^~~
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example5-BackupSwitchoverMode

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:24:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:24:3: note: suggested alternative: 'time'
   Wire.begin();
   ^~~~
   time
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:25:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:35:18: error: 'rtc' was not declared in this scope
   Serial.println(rtc.readConfigEEPROM_RAMmirror(0x37));
                  ^~~
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/src/RV-3028-C7.h:28:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/src/RV-3028-C7.cpp:17:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t RV3028::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'bool RV3028::readMultipleRegisters(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Example1-SetPrint_Time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:33:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:34:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:46:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:59:13: error: 'rtc' was not declared in this scope
         if (rtc.setToCompilerTime() == false) {
             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:68:9: error: 'rtc' was not declared in this scope
         rtc.set12Hour();
         ^~~
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example2-SetPrint_UNIXTime

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:17:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:28:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:29:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:29:7: note: suggested alternative: 'getc'
   if (rtc.begin() == false) {
       ^~~
       getc
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:40:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:40:7: note: suggested alternative: 'getc'
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^~~
       getc
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:55:13: error: 'rtc' was not declared in this scope
         if (rtc.setUNIX(UNIX) == false) {
             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:55:13: note: suggested alternative: 'getc'
         if (rtc.setUNIX(UNIX) == false) {
             ^~~
             getc
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example3-Trickle_Charging

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:24:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:25:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:25:7: note: suggested alternative: 'getc'
   if (rtc.begin() == false) {
       ^~~
       getc
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:35:18: error: 'rtc' was not declared in this scope
   Serial.println(rtc.readConfigEEPROM_RAMmirror(0x37));
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:35:18: note: suggested alternative: 'getc'
   Serial.println(rtc.readConfigEEPROM_RAMmirror(0x37));
                  ^~~
                  getc
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:37:27: error: 'TCR_3K' was not declared in this scope
   rtc.enableTrickleCharge(TCR_3K);   //series resistor 3kOhm
                           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:37:27: note: suggested alternative: 'TCB_t'
   rtc.enableTrickleCharge(TCR_3K);   //series resistor 3kOhm
                           ^~~~~~
                           TCB_t
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example4-Alarm_Interrupt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:51:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:52:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:61:3: error: 'rtc' was not declared in this scope
   rtc.enableAlarmInterrupt(alm_minute, alm_hour, alm_date_or_weekday, alm_isweekday, alm_mode);
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:68:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:77:7: error: 'rtc' was not declared in this scope
   if (rtc.readAlarmInterruptFlag()) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:92:13: error: 'rtc' was not declared in this scope
         if (rtc.setTime(sec, minute, hour, day, date, month, year) == false) {
             ^~~
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example5-BackupSwitchoverMode

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:24:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:25:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:25:7: note: suggested alternative: 'getc'
   if (rtc.begin() == false) {
       ^~~
       getc
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:35:18: error: 'rtc' was not declared in this scope
   Serial.println(rtc.readConfigEEPROM_RAMmirror(0x37));
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:35:18: note: suggested alternative: 'getc'
   Serial.println(rtc.readConfigEEPROM_RAMmirror(0x37));
                  ^~~
                  getc
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/Example1-SetPrint_Time

Result: PASS

Sketch uses 32932 bytes (12%) of program storage space. Maximum is 262144 bytes.
Global variables use 3976 bytes (12%) of dynamic memory, leaving 28792 bytes for local variables. Maximum is 32768 bytes.

examples/Example2-SetPrint_UNIXTime

Result: PASS

Sketch uses 32916 bytes (12%) of program storage space. Maximum is 262144 bytes.
Global variables use 3976 bytes (12%) of dynamic memory, leaving 28792 bytes for local variables. Maximum is 32768 bytes.

examples/Example3-Trickle_Charging

Result: PASS

Sketch uses 14972 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3580 bytes (10%) of dynamic memory, leaving 29188 bytes for local variables. Maximum is 32768 bytes.

examples/Example4-Alarm_Interrupt

Result: PASS

Sketch uses 33636 bytes (12%) of program storage space. Maximum is 262144 bytes.
Global variables use 4020 bytes (12%) of dynamic memory, leaving 28748 bytes for local variables. Maximum is 32768 bytes.

examples/Example5-BackupSwitchoverMode

Result: PASS

Sketch uses 14956 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3580 bytes (10%) of dynamic memory, leaving 29188 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 203786 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/Example1-SetPrint_Time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:33:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:34:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:46:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:59:13: error: 'rtc' was not declared in this scope
         if (rtc.setToCompilerTime() == false) {
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example1-SetPrint_Time/Example1-SetPrint_Time.ino:68:9: error: 'rtc' was not declared in this scope
         rtc.set12Hour();
         ^
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example2-SetPrint_UNIXTime

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:17:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:28:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:29:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:40:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example2-SetPrint_UNIXTime/Example2-SetPrint_UNIXTime.ino:55:13: error: 'rtc' was not declared in this scope
         if (rtc.setUNIX(UNIX) == false) {
             ^
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example3-Trickle_Charging

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:24:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:25:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:35:18: error: 'rtc' was not declared in this scope
   Serial.println(rtc.readConfigEEPROM_RAMmirror(0x37));
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example3-Trickle_Charging/Example3-Trickle_Charging.ino:37:27: error: 'TCR_3K' was not declared in this scope
   rtc.enableTrickleCharge(TCR_3K);   //series resistor 3kOhm
                           ^
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example4-Alarm_Interrupt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:51:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:52:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:61:3: error: 'rtc' was not declared in this scope
   rtc.enableAlarmInterrupt(alm_minute, alm_hour, alm_date_or_weekday, alm_isweekday, alm_mode);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:68:7: error: 'rtc' was not declared in this scope
   if (rtc.updateTime() == false) //Updates the time variables from RTC
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:77:7: error: 'rtc' was not declared in this scope
   if (rtc.readAlarmInterruptFlag()) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example4-Alarm_Interrupt/Example4-Alarm_Interrupt.ino:92:13: error: 'rtc' was not declared in this scope
         if (rtc.setTime(sec, minute, hour, day, date, month, year) == false) {
             ^
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library

examples/Example5-BackupSwitchoverMode

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:16:1: error: 'RV3028' does not name a type
 RV3028 rtc;
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:24:3: error: 'Wire' was not declared in this scope
   Wire.begin();
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:25:7: error: 'rtc' was not declared in this scope
   if (rtc.begin() == false) {
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library/examples/Example5-BackupSwitchoverMode/Example5-BackupSwitchoverMode.ino:35:18: error: 'rtc' was not declared in this scope
   Serial.println(rtc.readConfigEEPROM_RAMmirror(0x37));
                  ^
Multiple libraries were found for "RV-3028-C7.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RV-3028-C7
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTC_RV-3028-C7_Arduino_Library