RTT QRCode - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

RTT QRCode

Version: 0.1.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	QRCode
arduino:avr:uno 1.8.4	No	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtlibc.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtdef.h:1066,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtthread.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.h:9,
                 from /tmp/arduino-testlib2776815487/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/libc/libc_stat.h:14:10: fatal error: sys/stat.h: No such file or directory
 #include <sys/stat.h>
          ^~~~~~~~~~~~
compilation terminated.

examples/QRCode

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtlibc.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtdef.h:1066,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtthread.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.h:9,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino:6:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/libc/libc_stat.h:14:10: fatal error: sys/stat.h: No such file or directory
 #include <sys/stat.h>
          ^~~~~~~~~~~~
compilation terminated.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library RT-Thread claims to run on sam, samd, gd32v, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.cpp: In function 'void rt_driver_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.cpp:252:9: error: 'CONSOLE_DEVICE' was not declared in this scope
         CONSOLE_DEVICE.begin(CONFIG_USART_SPEED);
         ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.cpp:252:9: note: suggested alternative: 'CONSOLE_RX'
         CONSOLE_DEVICE.begin(CONFIG_USART_SPEED);
         ^~~~~~~~~~~~~~
         CONSOLE_RX
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.cpp: In function 'void rt_components_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.cpp:325:9: error: 'arduino_serial_init' was not declared in this scope
         arduino_serial_init();
         ^~~~~~~~~~~~~~~~~~~

examples/QRCode

Result: FAIL

WARNING: library RT-Thread claims to run on sam, samd, gd32v, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino: In function 'int qrcode(rt_uint8_t, char**)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino:97:7: error: 'LOG_E' was not declared in this scope
       LOG_E("ERR %d", ret);
       ^~~~~
Multiple libraries were found for "qrcode.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/QRCode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP_QRcode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP8266_QRcode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtlibc.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtdef.h:1066,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtthread.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.h:9,
                 from /tmp/arduino-testlib3243618212/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/libc/libc_stat.h:14:10: fatal error: sys/stat.h: No such file or directory
 #include <sys/stat.h>
          ^~~~~~~~~~~~
compilation terminated.

examples/QRCode

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtlibc.h:15:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtdef.h:1066,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/rtthread.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.h:9,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino:6:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/include/libc/libc_stat.h:14:10: fatal error: sys/stat.h: No such file or directory
 #include <sys/stat.h>
          ^~~~~~~~~~~~
compilation terminated.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 16100 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3632 bytes (11%) of dynamic memory, leaving 29136 bytes for local variables. Maximum is 32768 bytes.

examples/QRCode

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino: In function 'int qrcode(rt_uint8_t, char**)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino:97:7: error: 'LOG_E' was not declared in this scope
       LOG_E("ERR %d", ret);
       ^~~~~
Multiple libraries were found for "qrcode.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/QRCode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP_QRcode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP8266_QRcode

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library RT-Thread claims to run on sam, samd, gd32v, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/libcpu/risc-v/common/cpuport.h:14:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/libcpu/risc-v/common/context_gcc.S:12:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries//home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.cpp: In function 'void rt_components_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RT-Thread/src/rtt.cpp:325:29: error: 'arduino_serial_init' was not declared in this scope
         arduino_serial_init();
                             ^

examples/QRCode

Result: FAIL

WARNING: library RT-Thread claims to run on sam, samd, gd32v, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino:105:24: error: conflicting declaration of 'void setup()' with 'C' linkage
In file included from /tmp/arduino-sketch-43343994EBF6BFBA76097E1C0A1109DC/sketch/QRCode.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:118:6: note: previous declaration with 'C++' linkage
 void setup(void);
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino:110:23: error: conflicting declaration of 'void loop()' with 'C' linkage
In file included from /tmp/arduino-sketch-43343994EBF6BFBA76097E1C0A1109DC/sketch/QRCode.ino.cpp:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:119:6: note: previous declaration with 'C++' linkage
 void loop(void);
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino: In function 'int qrcode(rt_uint8_t, char**)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode/examples/QRCode/QRCode.ino:97:26: error: 'LOG_E' was not declared in this scope
       LOG_E("ERR %d", ret);
                          ^
Multiple libraries were found for "qrcode.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/QRCode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP_QRcode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RTT_QRCode
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP8266_QRcode