RhinoServo - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

RhinoServo

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	RhinoI2C	RhinoSerial	RhinoSoftSerial
arduino:avr:uno 1.8.4	Yes	PASS	PASS	FAIL	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	FAIL	PASS
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/RhinoI2C

Result: PASS

Sketch uses 12018 bytes (37%) of program storage space. Maximum is 32256 bytes.
Global variables use 964 bytes (47%) of dynamic memory, leaving 1084 bytes for local variables. Maximum is 2048 bytes.

examples/RhinoSerial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino:15:2: error: 'Serial3' was not declared in this scope
  Serial3.begin(9600);
  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino:15:2: note: suggested alternative: 'Serial'
  Serial3.begin(9600);
  ^~~~~~~
  Serial

examples/RhinoSoftSerial

Result: PASS

Sketch uses 12732 bytes (39%) of program storage space. Maximum is 32256 bytes.
Global variables use 1196 bytes (58%) of dynamic memory, leaving 852 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:263:45: error: default argument given for parameter 1 of 'void RhinoServo::Reset_Reference(int)' [-fpermissive]
 void RhinoServo :: Reset_Reference(int val=0)
                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.h:69:7: note: previous specification in 'void RhinoServo::Reset_Reference(int)' here
  void Reset_Reference(int val=0);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetCurrent_Position()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:571:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_P_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:610:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_I_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:649:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetI2C_Address()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:686:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~

examples/RhinoI2C

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:263:45: error: default argument given for parameter 1 of 'void RhinoServo::Reset_Reference(int)' [-fpermissive]
 void RhinoServo :: Reset_Reference(int val=0)
                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.h:69:7: note: previous specification in 'void RhinoServo::Reset_Reference(int)' here
  void Reset_Reference(int val=0);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetCurrent_Position()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:571:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_P_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:610:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_I_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:649:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetI2C_Address()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:686:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~

examples/RhinoSerial

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:263:45: error: default argument given for parameter 1 of 'void RhinoServo::Reset_Reference(int)' [-fpermissive]
 void RhinoServo :: Reset_Reference(int val=0)
                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.h:69:7: note: previous specification in 'void RhinoServo::Reset_Reference(int)' here
  void Reset_Reference(int val=0);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetCurrent_Position()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:571:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_P_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:610:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_I_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:649:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetI2C_Address()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:686:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~

examples/RhinoSoftSerial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.h:16:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::GetCurrent_Position()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::Get_P_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::Get_I_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/RhinoI2C

Result: PASS

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 12638 bytes (25%) of program storage space. Maximum is 49152 bytes.
Global variables use 530 bytes (8%) of dynamic memory, leaving 5614 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.h:16:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::GetCurrent_Position()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::Get_P_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::Get_I_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/RhinoSerial

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino:15:2: error: 'Serial3' was not declared in this scope
  Serial3.begin(9600);
  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino:15:2: note: suggested alternative: 'Serial1'
  Serial3.begin(9600);
  ^~~~~~~
  Serial1

examples/RhinoSoftSerial

Result: PASS

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 13753 bytes (27%) of program storage space. Maximum is 49152 bytes.
Global variables use 802 bytes (13%) of dynamic memory, leaving 5342 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.h:16:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::GetCurrent_Position()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::Get_P_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int RhinoServo::Get_I_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:263:45: error: default argument given for parameter 1 of 'void RhinoServo::Reset_Reference(int)' [-fpermissive]
 void RhinoServo :: Reset_Reference(int val=0)
                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.h:69:7: note: previous specification in 'void RhinoServo::Reset_Reference(int)' here
  void Reset_Reference(int val=0);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetCurrent_Position()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:571:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_P_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:610:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_I_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:649:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetI2C_Address()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:686:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~

examples/RhinoI2C

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:263:45: error: default argument given for parameter 1 of 'void RhinoServo::Reset_Reference(int)' [-fpermissive]
 void RhinoServo :: Reset_Reference(int val=0)
                                             ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.h:69:7: note: previous specification in 'void RhinoServo::Reset_Reference(int)' here
  void Reset_Reference(int val=0);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetCurrent_Position()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:571:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_P_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:610:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::Get_I_Gain()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:649:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp: In member function 'int RhinoServo::GetI2C_Address()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/src/RhinoServo.cpp:686:3: error: return-statement with no value, in function returning 'int' [-fpermissive]
   return;
   ^~~~~~

examples/RhinoSerial

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino:15:2: error: 'Serial3' was not declared in this scope
  Serial3.begin(9600);
  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino:15:2: note: suggested alternative: 'Serial_'
  Serial3.begin(9600);
  ^~~~~~~
  Serial_

examples/RhinoSoftSerial

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
 #include <util/delay_basic.h>
          ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).

examples/RhinoI2C

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).

examples/RhinoSerial

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RhinoServo/examples/RhinoSerial/RhinoSerial.ino:15:2: error: 'Serial3' was not declared in this scope
  Serial3.begin(9600);
  ^

examples/RhinoSoftSerial

Result: FAIL

WARNING: library RhinoServo claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Multiple libraries were found for "SoftwareSerial.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble