Robopoly Bluetooth - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Robopoly Bluetooth

Version: 1.5.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	BluetoothConfig	RemoteLED
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'void BT::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:47:5: note: in expansion of macro 'btSerial'
     btSerial.begin(baud);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:47:5: note: in expansion of macro 'btSerial'
     btSerial.begin(baud);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual int BT::available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:56:10: note: in expansion of macro 'btSerial'
   return btSerial.available();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:56:10: note: in expansion of macro 'btSerial'
   return btSerial.available();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual int BT::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:61:10: note: in expansion of macro 'btSerial'
   return btSerial.read();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:61:10: note: in expansion of macro 'btSerial'
   return btSerial.read();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual int BT::peek()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:66:10: note: in expansion of macro 'btSerial'
   return btSerial.peek();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:66:10: note: in expansion of macro 'btSerial'
   return btSerial.peek();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual void BT::flush()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:71:3: note: in expansion of macro 'btSerial'
   btSerial.flush();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:71:3: note: in expansion of macro 'btSerial'
   btSerial.flush();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual size_t BT::write(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:76:3: note: in expansion of macro 'btSerial'
   btSerial.write(byte);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:76:3: note: in expansion of macro 'btSerial'
   btSerial.write(byte);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'uint16_t BT::findBaud()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:87:5: note: in expansion of macro 'btSerial'
     btSerial.begin(baudRates[i]);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:87:5: note: in expansion of macro 'btSerial'
     btSerial.begin(baudRates[i]);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:100:3: note: in expansion of macro 'btSerial'
   btSerial.end();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:100:3: note: in expansion of macro 'btSerial'
   btSerial.end();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'bool BT::connect(const char*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:162:3: note: in expansion of macro 'btSerial'
   btSerial.write(this->buffer);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:162:3: note: in expansion of macro 'btSerial'
   btSerial.write(this->buffer);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'bool BT::search()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:209:3: note: in expansion of macro 'btSerial'
   btSerial.setTimeout(3000);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:209:3: note: in expansion of macro 'btSerial'
   btSerial.setTimeout(3000);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'bool BT::command(const char*, const char*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:229:3: note: in expansion of macro 'btSerial'
   btSerial.write(cmd);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:229:3: note: in expansion of macro 'btSerial'
   btSerial.write(cmd);
   ^~~~~~~~

examples/BluetoothConfig

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'void BT::begin(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:47:5: note: in expansion of macro 'btSerial'
     btSerial.begin(baud);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:47:5: note: in expansion of macro 'btSerial'
     btSerial.begin(baud);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual int BT::available()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:56:10: note: in expansion of macro 'btSerial'
   return btSerial.available();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:56:10: note: in expansion of macro 'btSerial'
   return btSerial.available();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual int BT::read()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:61:10: note: in expansion of macro 'btSerial'
   return btSerial.read();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:61:10: note: in expansion of macro 'btSerial'
   return btSerial.read();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual int BT::peek()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:66:10: note: in expansion of macro 'btSerial'
   return btSerial.peek();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:66:10: note: in expansion of macro 'btSerial'
   return btSerial.peek();
          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual void BT::flush()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:71:3: note: in expansion of macro 'btSerial'
   btSerial.flush();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:71:3: note: in expansion of macro 'btSerial'
   btSerial.flush();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'virtual size_t BT::write(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:76:3: note: in expansion of macro 'btSerial'
   btSerial.write(byte);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:76:3: note: in expansion of macro 'btSerial'
   btSerial.write(byte);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'uint16_t BT::findBaud()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:87:5: note: in expansion of macro 'btSerial'
     btSerial.begin(baudRates[i]);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:87:5: note: in expansion of macro 'btSerial'
     btSerial.begin(baudRates[i]);
     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:100:3: note: in expansion of macro 'btSerial'
   btSerial.end();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:100:3: note: in expansion of macro 'btSerial'
   btSerial.end();
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'bool BT::connect(const char*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:162:3: note: in expansion of macro 'btSerial'
   btSerial.write(this->buffer);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:162:3: note: in expansion of macro 'btSerial'
   btSerial.write(this->buffer);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'bool BT::search()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:209:3: note: in expansion of macro 'btSerial'
   btSerial.setTimeout(3000);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:209:3: note: in expansion of macro 'btSerial'
   btSerial.setTimeout(3000);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp: In member function 'bool BT::command(const char*, const char*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: error: 'Serial1' was not declared in this scope
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:229:3: note: in expansion of macro 'btSerial'
   btSerial.write(cmd);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.h:16:18: note: suggested alternative: 'Serial'
 #define btSerial Serial1
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Bluetooth/src/Bluetooth.cpp:229:3: note: in expansion of macro 'btSerial'
   btSerial.write(cmd);
   ^~~~~~~~

examples/RemoteLED

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
   TCCR4A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: note: suggested alternative: 'TCCR0A'
   TCCR4A = 0;
   ^~~~~~
   TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
   TCCR4B = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: note: suggested alternative: 'TCCR0B'
   TCCR4B = 0;
   ^~~~~~
   TCCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
   TCCR4C = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: note: suggested alternative: 'TCCR1C'
   TCCR4C = 0;
   ^~~~~~
   TCCR1C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
   TCCR4D = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: note: suggested alternative: 'TCCR0A'
   TCCR4D = 0;
   ^~~~~~
   TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
   TCCR4E = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: note: suggested alternative: 'TCCR0A'
   TCCR4E = 0;
   ^~~~~~
   TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
   TC4H = temp >> 8;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: note: suggested alternative: 'PC4'
   TC4H = temp >> 8;
   ^~~~
   PC4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
   OCR4A = temp & 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: note: suggested alternative: 'OCR2A'
   OCR4A = temp & 0xff;
   ^~~~~
   OCR2A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
   OCR4B = temp & 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: note: suggested alternative: 'OCR0B'
   OCR4B = temp & 0xff;
   ^~~~~
   OCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
   TCNT4 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: note: suggested alternative: 'TCNT0'
   TCNT4 = 0;
   ^~~~~
   TCNT0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
   OCR4C = 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: note: suggested alternative: 'OCR2A'
   OCR4C = 0xff;
   ^~~~~
   OCR2A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: note: suggested alternative: 'TIMSK0'
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
   ^~~~~~
   TIMSK0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: note: suggested alternative: 'OCIE0A'
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                  ^~~~~~
                  OCIE0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: note: suggested alternative: 'OCIE0B'
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                  ^~~~~~
                                  OCIE0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: note: suggested alternative: 'TOIE0'
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                                  ^~~~~
                                                  TOIE0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: note: suggested alternative: 'TIFR0'
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
   ^~~~~
   TIFR0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: note: suggested alternative: 'OCF1A'
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                 ^~~~~
                 OCF1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: note: suggested alternative: 'OCF0B'
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                ^~~~~
                                OCF0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: note: suggested alternative: 'TOV0'
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                               ^~~~
                                               TOV0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
   TCCR4B = (1 << CS40);
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: note: suggested alternative: 'CS00'
   TCCR4B = (1 << CS40);
                  ^~~~
                  CS00
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void TIMER4_OVF_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: error: 'TCCR4B' was not declared in this scope
       TCCR4B = 0;
       ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: note: suggested alternative: 'TCCR0B'
       TCCR4B = 0;
       ^~~~~~
       TCCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'int8_t setTimer(void (*)(), uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: error: 'OCIE1C' was not declared in this scope
     TIMSK1 = (1 << OCIE1C);
                    ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: note: suggested alternative: 'OCIE1A'
     TIMSK1 = (1 << OCIE1C);
                    ^~~~~~
                    OCIE1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: error: 'OCF1C' was not declared in this scope
     TIFR1 = (1 << OCF1C);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: note: suggested alternative: 'OCF1A'
     TIFR1 = (1 << OCF1C);
                   ^~~~~
                   OCF1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In member function 'void Stepper::moveSteps(int16_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: error: 'TCCR4A' was not declared in this scope
   TCCR4A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: note: suggested alternative: 'TCCR0A'
   TCCR4A = 0;
   ^~~~~~
   TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:3

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78898 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43596 bytes (16%) of dynamic memory, leaving 226740 bytes for local variables. Maximum is 270336 bytes.

examples/BluetoothConfig

Result: PASS

WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 82928 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43628 bytes (16%) of dynamic memory, leaving 226708 bytes for local variables. Maximum is 270336 bytes.

examples/RemoteLED

Result: FAIL

WARNING: library Robopoly_PRismino claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
   TCCR4A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
   TCCR4B = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
   TCCR4C = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
   TCCR4D = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
   TCCR4E = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
   TC4H = temp >> 8;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
   OCR4A = temp & 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
   OCR4B = temp & 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
   TCNT4 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: note: suggested alternative: 'SCNd64'
   TCNT4 = 0;
   ^~~~~
   SCNd64
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
   OCR4C = 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:70:3: error: 'DDRB' was not declared in this scope
   DDRB |= (1 << 7) | (1 << 6) | (1 << 5);
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:70:3: note: suggested alternative: 'DIR'
   DDRB |= (1 << 7) | (1 << 6) | (1 << 5);
   ^~~~
   DIR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:71:3: error: 'DDRD' was not declared in this scope
   DDRD |= (1 << 6);
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:71:3: note: suggested alternative: 'DIR'
   DDRD |= (1 << 6);
   ^~~~
   DIR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:79:3: error: 'PORTB' was not declared in this scope
   PORTB |= (1 << 7) | (1 << 6) | (1 << 5);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:79:3: note: suggested alternative: 'POT'
   PORTB |= (1 << 7) | (1 << 6) | (1 << 5);
   ^~~~~
   POT
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:80:3: error: 'PORTD' was not declared in this scope
   PORTD |= (1 << 6);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:80:3: note: suggested alternative: 'POT'
   PORTD |= (1 << 6);
   ^~~~~
   POT
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: note: suggested alternative: 'TIMER'
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
   TCCR4B = (1 << CS40);
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: note: suggested alternative: '._40'
   TCCR4B = (1 << CS40);
                  ^~~~
                  ._40
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:94:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER4_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:114:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER4_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:134:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER4_OVF_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'int8_t setTimer(void (*)(), uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: error: 'TCCR1A' was not declared in this scope
     TCCR1A = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: error: 'TCCR1B' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:20: error: 'WGM12' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: error: 'CS12' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
                                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: note: suggested alternative: 'p12'
     TCCR1B = (1 << WGM12) | (1 << CS12);
                                   ^~~~
                                   p12
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: error: 'TCNT1' was not declared in this scope
     TCNT1 = 0;
     ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: note: suggested alternative: 'SCNd16'
     TCNT1 = 0;
     ^~~~~
     SCNd16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:270:5: error: 'OCR1A' was not declared in this scope
     OCR1A = 6250;
     ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:5: error: 'TIMSK1' was not declared in this scope
     TIMSK1 = (1 << OCIE1C);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:5: note: suggested alternative: 'TIMER'
     TIMSK1 = (1 << OCIE1C);
     ^~~~~~
     TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: error: 'OCIE1C' was not declared in this scope
     TIMSK1 = (1 << OCIE1C);
                    ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:5: error: 'TIFR1' was not declared in this scope
     TIFR1 = (1 << OCF1C);
     ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: error: 'OCF1C' was not declared in this scope
     TIFR1 = (1 << OCF1C);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:303:4: error: expected constructor,

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 2930 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 474 bytes (7%) of dynamic memory, leaving 5670 bytes for local variables. Maximum is 6144 bytes.

examples/BluetoothConfig

Result: PASS

WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5873 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 506 bytes (8%) of dynamic memory, leaving 5638 bytes for local variables. Maximum is 6144 bytes.

examples/RemoteLED

Result: FAIL

WARNING: library Robopoly_PRismino claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
   TCCR4A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
   TCCR4B = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
   TCCR4C = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
   TCCR4D = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
   TCCR4E = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
   TC4H = temp >> 8;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: note: suggested alternative: 'TCA0'
   TC4H = temp >> 8;
   ^~~~
   TCA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
   OCR4A = temp & 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
   OCR4B = temp & 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
   TCNT4 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
   OCR4C = 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
   TCCR4B = (1 << CS40);
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void TIMER4_OVF_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: error: 'TCCR4B' was not declared in this scope
       TCCR4B = 0;
       ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'int8_t setTimer(void (*)(), uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: error: 'TCCR1A' was not declared in this scope
     TCCR1A = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: note: suggested alternative: 'TCB1'
     TCCR1A = 0;
     ^~~~~~
     TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: error: 'TCCR1B' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: note: suggested alternative: 'TCB1'
     TCCR1B = (1 << WGM12) | (1 << CS12);
     ^~~~~~
     TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:20: error: 'WGM12' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: error: 'CS12' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
                                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: note: suggested alternative: 'S2'
     TCCR1B = (1 << WGM12) | (1 << CS12);
                                   ^~~~
                                   S2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: error: 'TCNT1' was not declared in this scope
     TCNT1 = 0;
     ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: note: suggested alternative: 'TCB1'
     TCNT1 = 0;
     ^~~~~
     TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:270:5: error: 'OCR1A' was not declared in this scope
     OCR1A = 6250;
     ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:5: error: 'TIMSK1' was not declared in this scope
     TIMSK1 = (1 << OCIE1C);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:5: note: suggested alternative: 'TIMERB1'
     TIMSK1 = (1 << OCIE1C);
     ^~~~~~
     TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: error: 'OCIE1C' was not declared in this scope
     TIMSK1 = (1 << OCIE1C);
                    ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:5: error: 'TIFR1' was not declared in this scope
     TIFR1 = (1 << OCF1C);
     ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: error: 'OCF1C' was not declared in this scope
     TIFR1 = (1 << OCF1C);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In member function 'void Stepper::moveSteps(int16_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: error: 'TCCR4A' was not declared in this scope
   TCCR4A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:372:3: error: 'TCCR4B' was not declared in this scope
   TCCR4B = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:373:3: error: 'TCCR4C' was not declared in this scope
   TCCR4C = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:375:3: error: 'TCCR4D' was not declared in this scope
   TCCR4D = (1 << WGM40);
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:375:18: error: 'WGM40' was not declared in this scope
   TCCR4D = (1 << WGM40);
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:376:3: error: 'TCCR4E' was not declared in this scope
   TCCR4E = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:379:3: error: 'TC4H' was not declared in this scope
   TC4H = 0;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:379:3: note: suggested alternative: 'TCA0'
   TC4H = 0;
   ^~~~
   TCA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:380:3: error: 'TCNT4' was not declared in this scope
   TCNT4 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:387:3: error: 'TIMSK4' was not declared in this scope
   TIMSK4 = (1 << TOIE4);
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:387:18: error: 'TOIE4' was not declared in this scope
   TIMSK4 = (1 << TOIE4);
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PR

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12304 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3144 bytes (9%) of dynamic memory, leaving 29624 bytes for local variables. Maximum is 32768 bytes.

examples/BluetoothConfig

Result: PASS

WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16152 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3544 bytes (10%) of dynamic memory, leaving 29224 bytes for local variables. Maximum is 32768 bytes.

examples/RemoteLED

Result: FAIL

WARNING: library Robopoly_PRismino claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
   TCCR4A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: note: suggested alternative: 'TCC0'
   TCCR4A = 0;
   ^~~~~~
   TCC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
   TCCR4B = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: note: suggested alternative: 'TCC0'
   TCCR4B = 0;
   ^~~~~~
   TCC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
   TCCR4C = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: note: suggested alternative: 'TCC0'
   TCCR4C = 0;
   ^~~~~~
   TCC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
   TCCR4D = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: note: suggested alternative: 'TCC0'
   TCCR4D = 0;
   ^~~~~~
   TCC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
   TCCR4E = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: note: suggested alternative: 'TCC0'
   TCCR4E = 0;
   ^~~~~~
   TCC0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
   TC4H = temp >> 8;
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: note: suggested alternative: 'TC4'
   TC4H = temp >> 8;
   ^~~~
   TC4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
   OCR4A = temp & 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
   OCR4B = temp & 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
   TCNT4 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: note: suggested alternative: 'TC4'
   TCNT4 = 0;
   ^~~~~
   TC4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
   OCR4C = 0xff;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:70:3: error: 'DDRB' was not declared in this scope
   DDRB |= (1 << 7) | (1 << 6) | (1 << 5);
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:71:3: error: 'DDRD' was not declared in this scope
   DDRD |= (1 << 6);
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:79:9: error: no match for 'operator|=' (operand types are '_EPortType' and 'int')
   PORTB |= (1 << 7) | (1 << 6) | (1 << 5);
   ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:79:9: note: candidate: operator|=(_EPortType&, int) <built-in>
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:79:9: note:   conversion of argument 1 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:79:41: error: cannot bind non-const lvalue reference of type '_EPortType&' to an rvalue of type '_EPortType'
   PORTB |= (1 << 7) | (1 << 6) | (1 << 5);
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:80:3: error: 'PORTD' was not declared in this scope
   PORTD |= (1 << 6);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:80:3: note: suggested alternative: 'PORTC'
   PORTD |= (1 << 6);
   ^~~~~
   PORTC
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: note: suggested alternative: 'TC4'
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                               ^~~~
                                               TC4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
   TCCR4B = (1 << CS40);
                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:94:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER4_COMPA_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:114:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER4_COMPB_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:134:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER4_OVF_vect)
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'int8_t setTimer(void (*)(), uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: error: 'TCCR1A' was not declared in this scope
     TCCR1A = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: note: suggested alternative: 'TCC1'
     TCCR1A = 0;
     ^~~~~~
     TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: error: 'TCCR1B' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: note: suggested alternative: 'TCC1'
     TCCR1B = (1 << WGM12) | (1 << CS12);
     ^~~~~~
     TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:20: error: 'WGM12' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
                    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: error: 'CS12' was not declared in this scope
     TCCR1B = (1 << WGM12) | (1 << CS12);
                                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: note: suggested alternative: 'SS1'
     TCCR1B = (1 << WGM12) | (1 << CS12);
                                   ^~~~
                                   SS1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: error: 'TCNT1' was not declared in this scope
     TCNT1 = 0;
     ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: note: suggested alternative: 'TCC1'
     TCNT1 = 0;
     ^~~~~
     TCC1
/home/ec2-user/arduino-testlib/cl

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 200974 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13336 bytes (4%) of dynamic memory, leaving 314344 bytes for local variables. Maximum is 327680 bytes.

examples/BluetoothConfig

Result: PASS

WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 207910 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13600 bytes (4%) of dynamic memory, leaving 314080 bytes for local variables. Maximum is 327680 bytes.

examples/RemoteLED

Result: FAIL

WARNING: library Robopoly_PRismino claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library Robopoly_Bluetooth claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
   TCCR4A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
   TCCR4B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
   TCCR4C = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
   TCCR4D = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
   TCCR4E = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
   TC4H = temp >> 8;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
   OCR4A = temp & 0xff;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
   OCR4B = temp & 0xff;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
   TCNT4 = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
   OCR4C = 0xff;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:70:3: error: 'DDRB' was not declared in this scope
   DDRB |= (1 << 7) | (1 << 6) | (1 << 5);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:71:3: error: 'DDRD' was not declared in this scope
   DDRD |= (1 << 6);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:79:3: error: 'PORTB' was not declared in this scope
   PORTB |= (1 << 7) | (1 << 6) | (1 << 5);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:80:3: error: 'PORTD' was not declared in this scope
   PORTD |= (1 << 6);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
   TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
   TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
   TCCR4B = (1 << CS40);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:94:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER4_COMPA_vect)
    ^