This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.2
More details
| Board | Claims compatibility | Inclusion | GetPixels |
FindHighest |
|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No | FAIL | FAIL | FAIL |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
TCCR4A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: note: suggested alternative: 'TCCR0A'
TCCR4A = 0;
^~~~~~
TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: note: suggested alternative: 'TCCR0B'
TCCR4B = 0;
^~~~~~
TCCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
TCCR4C = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: note: suggested alternative: 'TCCR1C'
TCCR4C = 0;
^~~~~~
TCCR1C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
TCCR4D = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: note: suggested alternative: 'TCCR0A'
TCCR4D = 0;
^~~~~~
TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
TCCR4E = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: note: suggested alternative: 'TCCR0A'
TCCR4E = 0;
^~~~~~
TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
TC4H = temp >> 8;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: note: suggested alternative: 'PC4'
TC4H = temp >> 8;
^~~~
PC4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
OCR4A = temp & 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: note: suggested alternative: 'OCR2A'
OCR4A = temp & 0xff;
^~~~~
OCR2A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
OCR4B = temp & 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: note: suggested alternative: 'OCR0B'
OCR4B = temp & 0xff;
^~~~~
OCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
TCNT4 = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: note: suggested alternative: 'TCNT0'
TCNT4 = 0;
^~~~~
TCNT0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
OCR4C = 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: note: suggested alternative: 'OCR2A'
OCR4C = 0xff;
^~~~~
OCR2A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: note: suggested alternative: 'TIMSK0'
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
TIMSK0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: note: suggested alternative: 'OCIE0A'
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
OCIE0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: note: suggested alternative: 'OCIE0B'
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
OCIE0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: note: suggested alternative: 'TOIE0'
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~
TOIE0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: note: suggested alternative: 'TIFR0'
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
TIFR0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: note: suggested alternative: 'OCF1A'
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
OCF1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: note: suggested alternative: 'OCF0B'
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
OCF0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: note: suggested alternative: 'TOV0'
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~
TOV0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
TCCR4B = (1 << CS40);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: note: suggested alternative: 'CS00'
TCCR4B = (1 << CS40);
^~~~
CS00
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void TIMER4_OVF_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: note: suggested alternative: 'TCCR0B'
TCCR4B = 0;
^~~~~~
TCCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'int8_t setTimer(void (*)(), uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: error: 'OCIE1C' was not declared in this scope
TIMSK1 = (1 << OCIE1C);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: note: suggested alternative: 'OCIE1A'
TIMSK1 = (1 << OCIE1C);
^~~~~~
OCIE1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: error: 'OCF1C' was not declared in this scope
TIFR1 = (1 << OCF1C);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: note: suggested alternative: 'OCF1A'
TIFR1 = (1 << OCF1C);
^~~~~
OCF1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In member function 'void Stepper::moveSteps(int16_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: error: 'TCCR4A' was not declared in this scope
TCCR4A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: note: suggested alternative: 'TCCR0A'
TCCR4A = 0;
^~~~~~
TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:3
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
TCCR4A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: note: suggested alternative: 'TCCR0A'
TCCR4A = 0;
^~~~~~
TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: note: suggested alternative: 'TCCR0B'
TCCR4B = 0;
^~~~~~
TCCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
TCCR4C = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: note: suggested alternative: 'TCCR1C'
TCCR4C = 0;
^~~~~~
TCCR1C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
TCCR4D = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: note: suggested alternative: 'TCCR0A'
TCCR4D = 0;
^~~~~~
TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
TCCR4E = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: note: suggested alternative: 'TCCR0A'
TCCR4E = 0;
^~~~~~
TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
TC4H = temp >> 8;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: note: suggested alternative: 'PC4'
TC4H = temp >> 8;
^~~~
PC4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
OCR4A = temp & 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: note: suggested alternative: 'OCR2A'
OCR4A = temp & 0xff;
^~~~~
OCR2A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
OCR4B = temp & 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: note: suggested alternative: 'OCR0B'
OCR4B = temp & 0xff;
^~~~~
OCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
TCNT4 = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: note: suggested alternative: 'TCNT0'
TCNT4 = 0;
^~~~~
TCNT0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
OCR4C = 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: note: suggested alternative: 'OCR2A'
OCR4C = 0xff;
^~~~~
OCR2A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: note: suggested alternative: 'TIMSK0'
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
TIMSK0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: note: suggested alternative: 'OCIE0A'
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
OCIE0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: note: suggested alternative: 'OCIE0B'
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
OCIE0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: note: suggested alternative: 'TOIE0'
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~
TOIE0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: note: suggested alternative: 'TIFR0'
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
TIFR0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: note: suggested alternative: 'OCF1A'
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
OCF1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: note: suggested alternative: 'OCF0B'
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
OCF0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: note: suggested alternative: 'TOV0'
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~
TOV0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
TCCR4B = (1 << CS40);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: note: suggested alternative: 'CS00'
TCCR4B = (1 << CS40);
^~~~
CS00
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void TIMER4_OVF_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: note: suggested alternative: 'TCCR0B'
TCCR4B = 0;
^~~~~~
TCCR0B
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'int8_t setTimer(void (*)(), uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: error: 'OCIE1C' was not declared in this scope
TIMSK1 = (1 << OCIE1C);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: note: suggested alternative: 'OCIE1A'
TIMSK1 = (1 << OCIE1C);
^~~~~~
OCIE1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: error: 'OCF1C' was not declared in this scope
TIFR1 = (1 << OCF1C);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: note: suggested alternative: 'OCF1A'
TIFR1 = (1 << OCF1C);
^~~~~
OCF1A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In member function 'void Stepper::moveSteps(int16_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: error: 'TCCR4A' was not declared in this scope
TCCR4A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: note: suggested alternative: 'TCCR0A'
TCCR4A = 0;
^~~~~~
TCCR0A
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:3
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:10: fatal error: util/twi.h: No such file or directory
#include <util/twi.h>
^~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:10: fatal error: util/twi.h: No such file or directory
#include <util/twi.h>
^~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:10: fatal error: util/twi.h: No such file or directory
#include <util/twi.h>
^~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library Robopoly_Linear_Camera claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp: In member function 'void LinearCamera::twiStart()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:16:5: error: 'TWCR' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:16:5: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:16:18: error: 'TWINT' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:16:18: note: suggested alternative: 'TWI_t'
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
^~~~~
TWI_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:16:33: error: 'TWSTA' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:16:33: note: suggested alternative: 'TWISPD'
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
^~~~~
TWISPD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:16:48: error: 'TWEN' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:16:48: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp: In member function 'void LinearCamera::twiStop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:23:5: error: 'TWCR' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:23:5: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:23:18: error: 'TWINT' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:23:18: note: suggested alternative: 'TWI_t'
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
^~~~~
TWI_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:23:33: error: 'TWSTO' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:23:33: note: suggested alternative: 'TWISPD'
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
^~~~~
TWISPD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:23:48: error: 'TWEN' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:23:48: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp: In member function 'void LinearCamera::twiWrite(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:29:5: error: 'TWDR' was not declared in this scope
TWDR = data;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:29:5: note: suggested alternative: 'TWI0'
TWDR = data;
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:30:5: error: 'TWCR' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:30:5: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:30:18: error: 'TWINT' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:30:18: note: suggested alternative: 'TWI_t'
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~~
TWI_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:30:33: error: 'TWEN' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:30:33: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp: In member function 'uint8_t LinearCamera::twiReadAck()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:38:5: error: 'TWCR' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:38:5: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:38:18: error: 'TWINT' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:38:18: note: suggested alternative: 'TWI_t'
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
^~~~~
TWI_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:38:33: error: 'TWEN' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:38:33: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:38:47: error: 'TWEA' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:38:47: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:40:12: error: 'TWDR' was not declared in this scope
return TWDR;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:40:12: note: suggested alternative: 'TWI0'
return TWDR;
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp: In member function 'uint8_t LinearCamera::twiReadNack()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:46:5: error: 'TWCR' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:46:5: note: suggested alternative: 'TWI0'
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~
TWI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:46:18: error: 'TWINT' was not declared in this scope
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:46:18: note: suggested alternative: 'TWI_t'
TWCR = (1 << TWINT) | (1 << TWEN);
^~~~~
TWI_t
/home/ec2-user/arduino-testlib/cli-datadir/use
Result: FAIL
WARNING: library Robopoly_PRismino claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Robopoly_Linear_Camera claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
TCCR4A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
TCCR4C = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
TCCR4D = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
TCCR4E = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
TC4H = temp >> 8;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: note: suggested alternative: 'TCA0'
TC4H = temp >> 8;
^~~~
TCA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
OCR4A = temp & 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
OCR4B = temp & 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
TCNT4 = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
OCR4C = 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
TCCR4B = (1 << CS40);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void TIMER4_OVF_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'int8_t setTimer(void (*)(), uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: error: 'TCCR1A' was not declared in this scope
TCCR1A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: note: suggested alternative: 'TCB1'
TCCR1A = 0;
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: error: 'TCCR1B' was not declared in this scope
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: note: suggested alternative: 'TCB1'
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:20: error: 'WGM12' was not declared in this scope
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: error: 'CS12' was not declared in this scope
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: note: suggested alternative: 'S2'
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~
S2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: error: 'TCNT1' was not declared in this scope
TCNT1 = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: note: suggested alternative: 'TCB1'
TCNT1 = 0;
^~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:270:5: error: 'OCR1A' was not declared in this scope
OCR1A = 6250;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:5: error: 'TIMSK1' was not declared in this scope
TIMSK1 = (1 << OCIE1C);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:5: note: suggested alternative: 'TIMERB1'
TIMSK1 = (1 << OCIE1C);
^~~~~~
TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: error: 'OCIE1C' was not declared in this scope
TIMSK1 = (1 << OCIE1C);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:5: error: 'TIFR1' was not declared in this scope
TIFR1 = (1 << OCF1C);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: error: 'OCF1C' was not declared in this scope
TIFR1 = (1 << OCF1C);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In member function 'void Stepper::moveSteps(int16_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: error: 'TCCR4A' was not declared in this scope
TCCR4A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:372:3: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:373:3: error: 'TCCR4C' was not declared in this scope
TCCR4C = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:375:3: error: 'TCCR4D' was not declared in this scope
TCCR4D = (1 << WGM40);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:375:18: error: 'WGM40' was not declared in this scope
TCCR4D = (1 << WGM40);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:376:3: error: 'TCCR4E' was not declared in this scope
TCCR4E = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:379:3: error: 'TC4H' was not declared in this scope
TC4H = 0;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:379:3: note: suggested alternative: 'TCA0'
TC4H = 0;
^~~~
TCA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:380:3: error: 'TCNT4' was not declared in this scope
TCNT4 = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:387:3: error: 'TIMSK4' was not declared in this scope
TIMSK4 = (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:387:18: error: 'TOIE4' was not declared in this scope
TIMSK4 = (1 << TOIE4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopol
Result: FAIL
WARNING: library Robopoly_PRismino claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library Robopoly_Linear_Camera claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void setSpeed(int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:21:3: error: 'TCCR4A' was not declared in this scope
TCCR4A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:22:3: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:23:3: error: 'TCCR4C' was not declared in this scope
TCCR4C = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:25:3: error: 'TCCR4D' was not declared in this scope
TCCR4D = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:26:3: error: 'TCCR4E' was not declared in this scope
TCCR4E = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: error: 'TC4H' was not declared in this scope
TC4H = temp >> 8;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:53:3: note: suggested alternative: 'TCA0'
TC4H = temp >> 8;
^~~~
TCA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:54:3: error: 'OCR4A' was not declared in this scope
OCR4A = temp & 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:59:3: error: 'OCR4B' was not declared in this scope
OCR4B = temp & 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:63:3: error: 'TCNT4' was not declared in this scope
TCNT4 = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:67:3: error: 'OCR4C' was not declared in this scope
OCR4C = 0xff;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:3: error: 'TIMSK4' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:18: error: 'OCIE4A' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:34: error: 'OCIE4B' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:84:50: error: 'TOIE4' was not declared in this scope
TIMSK4 = (1 << OCIE4A) | (1 << OCIE4B) | (1 << TOIE4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:3: error: 'TIFR4' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:17: error: 'OCF4A' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:32: error: 'OCF4B' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:86:47: error: 'TOV4' was not declared in this scope
TIFR4 = (1 << OCF4A) | (1 << OCF4B) | (1 << TOV4);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:89:18: error: 'CS40' was not declared in this scope
TCCR4B = (1 << CS40);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'void TIMER4_OVF_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:179:7: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In function 'int8_t setTimer(void (*)(), uint16_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: error: 'TCCR1A' was not declared in this scope
TCCR1A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:265:5: note: suggested alternative: 'TCB1'
TCCR1A = 0;
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: error: 'TCCR1B' was not declared in this scope
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:5: note: suggested alternative: 'TCB1'
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:20: error: 'WGM12' was not declared in this scope
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: error: 'CS12' was not declared in this scope
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:266:35: note: suggested alternative: 'S2'
TCCR1B = (1 << WGM12) | (1 << CS12);
^~~~
S2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: error: 'TCNT1' was not declared in this scope
TCNT1 = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:267:5: note: suggested alternative: 'TCB1'
TCNT1 = 0;
^~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:270:5: error: 'OCR1A' was not declared in this scope
OCR1A = 6250;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:5: error: 'TIMSK1' was not declared in this scope
TIMSK1 = (1 << OCIE1C);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:5: note: suggested alternative: 'TIMERB1'
TIMSK1 = (1 << OCIE1C);
^~~~~~
TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:271:20: error: 'OCIE1C' was not declared in this scope
TIMSK1 = (1 << OCIE1C);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:5: error: 'TIFR1' was not declared in this scope
TIFR1 = (1 << OCF1C);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:272:19: error: 'OCF1C' was not declared in this scope
TIFR1 = (1 << OCF1C);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp: In member function 'void Stepper::moveSteps(int16_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:371:3: error: 'TCCR4A' was not declared in this scope
TCCR4A = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:372:3: error: 'TCCR4B' was not declared in this scope
TCCR4B = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:373:3: error: 'TCCR4C' was not declared in this scope
TCCR4C = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:375:3: error: 'TCCR4D' was not declared in this scope
TCCR4D = (1 << WGM40);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:375:18: error: 'WGM40' was not declared in this scope
TCCR4D = (1 << WGM40);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:376:3: error: 'TCCR4E' was not declared in this scope
TCCR4E = 0;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:379:3: error: 'TC4H' was not declared in this scope
TC4H = 0;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:379:3: note: suggested alternative: 'TCA0'
TC4H = 0;
^~~~
TCA0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:380:3: error: 'TCNT4' was not declared in this scope
TCNT4 = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:387:3: error: 'TIMSK4' was not declared in this scope
TIMSK4 = (1 << TOIE4);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_PRismino/src/prismino.cpp:387:18: error: 'TOIE4' was not declared in this scope
TIMSK4 = (1 << TOIE4);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopol
Result: FAIL
This library has no main header file so an empty one was created.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:10: fatal error: util/twi.h: No such file or directory
#include <util/twi.h>
^~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:10: fatal error: util/twi.h: No such file or directory
#include <util/twi.h>
^~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:10: fatal error: util/twi.h: No such file or directory
#include <util/twi.h>
^~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:22: fatal error: util/twi.h: No such file or directory compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:22: fatal error: util/twi.h: No such file or directory compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Robopoly_Linear_Camera/src/LinearCamera.cpp:11:22: fatal error: util/twi.h: No such file or directory compilation terminated.