S7XG - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

S7XG

Version: 0.1.0
More details

Compatibility matrix

Board Claims compatibility Inclusion 
lorawan_otaa
 
module_info
 
serial_bridge
 
gps_basic
 
lorawan_abp
arduino:avr:uno
1.8.4 		No FAIL FAIL FAIL FAIL FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		No FAIL FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL PASS FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL 

/private/tmp/arduino-testlib2206847535/test/test.ino:1:10: fatal error: s7xg.h: No such file or directory
 #include <s7xg.h>
          ^~~~~~~~
compilation terminated.

examples/gps_basic

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/gps_basic/gps_basic.ino:27:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

examples/lorawan_abp

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/lorawan_abp/lorawan_abp.ino:26:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~
Multiple libraries were found for "CayenneLPP.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CayenneLPP
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/TheThingsNetwork
Multiple libraries were found for "ArduinoJson.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ThingESP
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP

examples/lorawan_otaa

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/lorawan_otaa/lorawan_otaa.ino:27:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

examples/module_info

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::sleep(uint32_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: error: no matching function for call to 'S7XG::_sendAndReturn(const char [21], uint32_t&)'
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:26:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note: candidate: template<class T> char* S7XG::_sendAndReturn(T*)
     template<typename T> char * _sendAndReturn(T * s);
                                 ^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note:   template argument deduction/substitution failed:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: note:   candidate expects 1 argument, 2 provided
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::wake()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:94:1: error: expected ';' before '}' token
 }
 ^
Multiple libraries were found for "SoftwareSerial.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/SoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Dabble

examples/serial_bridge

Result: FAIL 

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/serial_bridge/serial_bridge.ino:25:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

/tmp/arduino-testlib788704651/test/test.ino:1:10: fatal error: s7xg.h: No such file or directory
 #include <s7xg.h>
          ^~~~~~~~
compilation terminated.

examples/gps_basic

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/gps_basic/gps_basic.ino:27:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

examples/lorawan_abp

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/lorawan_abp/lorawan_abp.ino:26:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~
Multiple libraries were found for "ArduinoJson.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Multiple libraries were found for "CayenneLPP.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CayenneLPP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TheThingsNetwork

examples/lorawan_otaa

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/lorawan_otaa/lorawan_otaa.ino:27:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

examples/module_info

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino:79:18: error: 'SerialS7XG' was not declared in this scope
     module.begin(SerialS7XG);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino:79:18: note: suggested alternative: 'Serial'
     module.begin(SerialS7XG);
                  ^~~~~~~~~~
                  Serial

examples/serial_bridge

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/serial_bridge/serial_bridge.ino:25:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

/tmp/arduino-testlib788704651/test/test.ino:1:10: fatal error: s7xg.h: No such file or directory
 #include <s7xg.h>
          ^~~~~~~~
compilation terminated.

examples/gps_basic

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/gps_basic/gps_basic.ino:27:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

examples/lorawan_abp

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/lorawan_abp/lorawan_abp.ino:26:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~
Multiple libraries were found for "CayenneLPP.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CayenneLPP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TheThingsNetwork
Multiple libraries were found for "ArduinoJson.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT

examples/lorawan_otaa

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/lorawan_otaa/lorawan_otaa.ino:27:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

examples/module_info

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino:79:18: error: 'SerialS7XG' was not declared in this scope
     module.begin(SerialS7XG);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino:79:18: note: suggested alternative: 'Serial1'
     module.begin(SerialS7XG);
                  ^~~~~~~~~~
                  Serial1

examples/serial_bridge

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/serial_bridge/serial_bridge.ino:25:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

/private/tmp/arduino-testlib2206847535/test/test.ino:1:10: fatal error: s7xg.h: No such file or directory
 #include <s7xg.h>
          ^~~~~~~~
compilation terminated.

examples/gps_basic

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/gps_basic/gps_basic.ino:27:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

examples/lorawan_abp

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/lorawan_abp/lorawan_abp.ino:26:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~
Multiple libraries were found for "CayenneLPP.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CayenneLPP
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/TheThingsNetwork
Multiple libraries were found for "ArduinoJson.h"
  Used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/ThingESP
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
  Not used: /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino

examples/lorawan_otaa

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/lorawan_otaa/lorawan_otaa.ino:27:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

examples/module_info

Result: FAIL 

WARNING: library S7XG claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino:79:18: error: 'SerialS7XG' was not declared in this scope
     module.begin(SerialS7XG);
                  ^~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/module_info/module_info.ino:79:18: note: suggested alternative: 'SerialUSB'
     module.begin(SerialS7XG);
                  ^~~~~~~~~~
                  SerialUSB

examples/serial_bridge

Result: FAIL 

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/S7XG/examples/serial_bridge/serial_bridge.ino:25:6: error: #error "This scketch is meant to run on an ESP32 board"
     #error "This scketch is meant to run on an ESP32 board"
      ^~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

/tmp/arduino-testlib788704651/test/test.ino:1:18: fatal error: s7xg.h: No such file or directory
compilation terminated.

examples/gps_basic

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::sleep(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: error: no matching function for call to 'S7XG::_sendAndReturn(const char [21], uint32_t&)'
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note: candidate: template<class T> char* S7XG::_sendAndReturn(T*)
     template<typename T> char * _sendAndReturn(T * s);
                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note:   template argument deduction/substitution failed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: note:   candidate expects 1 argument, 2 provided
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::wake()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:94:1: error: expected ';' before '}' token
 }
 ^

examples/lorawan_abp

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::sleep(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: error: no matching function for call to 'S7XG::_sendAndReturn(const char [21], uint32_t&)'
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note: candidate: template<class T> char* S7XG::_sendAndReturn(T*)
     template<typename T> char * _sendAndReturn(T * s);
                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note:   template argument deduction/substitution failed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: note:   candidate expects 1 argument, 2 provided
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::wake()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:94:1: error: expected ';' before '}' token
 }
 ^
Multiple libraries were found for "CayenneLPP.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CayenneLPP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TheThingsNetwork
Multiple libraries were found for "ArduinoJson.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector

examples/lorawan_otaa

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::sleep(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: error: no matching function for call to 'S7XG::_sendAndReturn(const char [21], uint32_t&)'
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note: candidate: template<class T> char* S7XG::_sendAndReturn(T*)
     template<typename T> char * _sendAndReturn(T * s);
                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note:   template argument deduction/substitution failed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: note:   candidate expects 1 argument, 2 provided
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::wake()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:94:1: error: expected ';' before '}' token
 }
 ^

examples/module_info

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::sleep(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: error: no matching function for call to 'S7XG::_sendAndReturn(const char [21], uint32_t&)'
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note: candidate: template<class T> char* S7XG::_sendAndReturn(T*)
     template<typename T> char * _sendAndReturn(T * s);
                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.h:253:33: note:   template argument deduction/substitution failed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:84:54: note:   candidate expects 1 argument, 2 provided
     char * buffer = _sendAndReturn(SIP_SLEEP, seconds);
                                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp: In member function 'bool S7XG::wake()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/S7XG/src/S7XG.cpp:94:1: error: expected ';' before '}' token
 }
 ^

examples/serial_bridge

Result: PASS 

Sketch uses 204466 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13440 bytes (4%) of dynamic memory, leaving 314240 bytes for local variables. Maximum is 327680 bytes.