SDConfigCommand - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

SDConfigCommand

Version: 0.25
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	ReadAndWriteConfigFileExample	StressReadExample
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 5230 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 793 bytes (38%) of dynamic memory, leaving 1255 bytes for local variables. Maximum is 2048 bytes.

examples/ReadAndWriteConfigFileExample

Result: PASS

Sketch uses 15988 bytes (49%) of program storage space. Maximum is 32256 bytes.
Global variables use 1057 bytes (51%) of dynamic memory, leaving 991 bytes for local variables. Maximum is 2048 bytes.

examples/StressReadExample

Result: PASS

Sketch uses 13070 bytes (40%) of program storage space. Maximum is 32256 bytes.
Global variables use 1473 bytes (71%) of dynamic memory, leaving 575 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 83270 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44256 bytes (16%) of dynamic memory, leaving 226080 bytes for local variables. Maximum is 270336 bytes.

examples/ReadAndWriteConfigFileExample

Result: PASS

Sketch uses 90440 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44448 bytes (16%) of dynamic memory, leaving 225888 bytes for local variables. Maximum is 270336 bytes.

examples/StressReadExample

Result: PASS

Sketch uses 89020 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45404 bytes (16%) of dynamic memory, leaving 224932 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 8736 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 864 bytes (14%) of dynamic memory, leaving 5280 bytes for local variables. Maximum is 6144 bytes.

examples/ReadAndWriteConfigFileExample

Result: PASS

Sketch uses 18521 bytes (37%) of program storage space. Maximum is 49152 bytes.
Global variables use 1030 bytes (16%) of dynamic memory, leaving 5114 bytes for local variables. Maximum is 6144 bytes.

examples/StressReadExample

Result: PASS

Sketch uses 15668 bytes (31%) of program storage space. Maximum is 49152 bytes.
Global variables use 1480 bytes (24%) of dynamic memory, leaving 4664 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 15752 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.

examples/ReadAndWriteConfigFileExample

Result: PASS

Sketch uses 24020 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 4280 bytes (13%) of dynamic memory, leaving 28488 bytes for local variables. Maximum is 32768 bytes.

examples/StressReadExample

Result: PASS

Sketch uses 22404 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 5236 bytes (15%) of dynamic memory, leaving 27532 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SDConfigCommand/src/SDConfigCommand.h:36,
                 from /tmp/arduino-testlib1361813660/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD

examples/ReadAndWriteConfigFileExample

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SDConfigCommand/src/SDConfigCommand.h:36,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SDConfigCommand/examples/ReadAndWriteConfigFileExample/ReadAndWriteConfigFileExample.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD

examples/StressReadExample

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2Card.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/SdFat.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/SD.h:20,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SDConfigCommand/src/SDConfigCommand.h:36,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SDConfigCommand/examples/StressReadExample/StressReadExample.ino:20:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD/src/utility/Sd2PinMap.h:524:2: error: #error Architecture or board not supported.
 #error Architecture or board not supported.
  ^
Multiple libraries were found for "SD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SD
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/SD