This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.3
More details
| Board | Claims compatibility | Inclusion | Alarm |
Blink |
BlinkToggle |
DefaultSTEAMbot |
PushButtonLED |
|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /private/tmp/arduino-testlib3844780149/test/test.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC1'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB2'
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PC1'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: note: suggested alternative: 'A1'
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Alarm/Alarm.ino:7:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC1'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB2'
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PC1'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: note: suggested alternative: 'A1'
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/ard
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Blink/Blink.ino:7:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC1'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB2'
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PC1'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: note: suggested alternative: 'A1'
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/ard
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/BlinkToggle/BlinkToggle.ino:7:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC1'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB2'
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PC1'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: note: suggested alternative: 'A1'
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Docum
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino:8:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC1'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB2'
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PC1'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: note: suggested alternative: 'A1'
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alran
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/PushButtonLED/PushButtonLED.ino:7:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC1'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB2'
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PC1'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: note: suggested alternative: 'A1'
#define R1A_PIN PA1 //Right motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/D
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /tmp/arduino-testlib484552022/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PWM_7'
pinMode(ia, PWM);
^~~
PWM_7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'write'
pwmWrite(_ia, 0);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'write'
pwmWrite(_ia, speed);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: '._14'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/sr
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Alarm/Alarm.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PWM_7'
pinMode(ia, PWM);
^~~
PWM_7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'write'
pwmWrite(_ia, 0);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'write'
pwmWrite(_ia, speed);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: '._14'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduin
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Blink/Blink.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PWM_7'
pinMode(ia, PWM);
^~~
PWM_7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'write'
pwmWrite(_ia, 0);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'write'
pwmWrite(_ia, speed);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: '._14'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduin
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/BlinkToggle/BlinkToggle.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PWM_7'
pinMode(ia, PWM);
^~~
PWM_7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'write'
pwmWrite(_ia, 0);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'write'
pwmWrite(_ia, speed);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: '._14'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PWM_7'
pinMode(ia, PWM);
^~~
PWM_7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'write'
pwmWrite(_ia, 0);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'write'
pwmWrite(_ia, speed);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: '._14'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/PushButtonLED/PushButtonLED.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PWM_7'
pinMode(ia, PWM);
^~~
PWM_7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'write'
pwmWrite(_ia, 0);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'write'
pwmWrite(_ia, speed);
^~~~~~~~
write
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: '._14'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib484552022/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB'
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PIN4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Alarm/Alarm.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB'
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PIN4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Blink/Blink.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB'
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PIN4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/BlinkToggle/BlinkToggle.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB'
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PIN4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_P
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB'
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PIN4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PI
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/PushButtonLED/PushButtonLED.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: 'PC'
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: note: suggested alternative: 'PB'
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'PIN4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: note: suggested alternative: 'A7'
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /private/tmp/arduino-testlib3844780149/test/test.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PM'
pinMode(ia, PWM);
^~~
PM
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'TC4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Alarm/Alarm.ino:7:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PM'
pinMode(ia, PWM);
^~~
PM
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'TC4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Blink/Blink.ino:7:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PM'
pinMode(ia, PWM);
^~~
PM
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'TC4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/BlinkToggle/BlinkToggle.ino:7:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PM'
pinMode(ia, PWM);
^~~
PM
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'TC4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/D
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino:8:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PM'
pinMode(ia, PWM);
^~~
PM
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'TC4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/a
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/PushButtonLED/PushButtonLED.ino:7:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: note: suggested alternative: 'PM'
pinMode(ia, PWM);
^~~
PM
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:5: note: suggested alternative: 'fwrite'
pwmWrite(_ia, 0);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:7: note: suggested alternative: 'fwrite'
pwmWrite(_ia, speed);
^~~~~~~~
fwrite
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: note: suggested alternative: '._15'
#define SB_BT_RESET PC15
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: note: suggested alternative: 'TC4'
#define STOP_BUTTON_PIN PC14 //Stop button
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: note: suggested alternative: 'B0'
#define RED_LED_PIN PB0
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: note: suggested alternative: 'B1'
#define GREEN_LED_PIN PB1
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: note: suggested alternative: 'A6'
#define SPEAKER_PIN PA6
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: note: suggested alternative: 'A0'
#define L1A_PIN PA0 //Left motor 1A
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: note: suggested alternative: 'A4'
#define L2A_PIN PA4 //Left motor 1B
^
/Users/alran
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /tmp/arduino-testlib484552022/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::playNote(unsigned int, unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:367:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:372:5: error: '::tone' has not been declared
::tone(_pin, freq);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:376:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::noTone() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:380:5: error: '::noTone' has not been declared
::noTone(_pin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::beep(long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:384:5: error: '::tone' has not been declared
::tone(_pin, BEEP_FREQ, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:20: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:26: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:51:17: error: 'PA5' was not declared in this scope
#define R2A_PIN PA5 //Right motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:60: note: in expansion of macro 'R2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:52:22: error: 'PA14' was not declared in this scope
#define USS_TRIG_PIN PA14 //Ultrasonic sensor trigger on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:20: note: in expansion of macro 'USS_TRIG_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:53:22: error: 'PA13' was not declared in this scope
#define USS_ECHO_PIN PA13 //Ultrasonic sensor echo on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:34: note: in expansion of macro 'USS_ECHO_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Alarm/Alarm.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::playNote(unsigned int, unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:367:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:372:5: error: '::tone' has not been declared
::tone(_pin, freq);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:376:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::noTone() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:380:5: error: '::noTone' has not been declared
::noTone(_pin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::beep(long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:384:5: error: '::tone' has not been declared
::tone(_pin, BEEP_FREQ, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:20: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:26: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:51:17: error: 'PA5' was not declared in this scope
#define R2A_PIN PA5 //Right motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:60: note: in expansion of macro 'R2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:52:22: error: 'PA14' was not declared in this scope
#define USS_TRIG_PIN PA14 //Ultrasonic sensor trigger on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:20: note: in expansion of macro 'USS_TRIG_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:53:22: error: 'PA13' was not declared in this scope
#define USS_ECHO_PIN PA13 //Ultrasonic sensor echo on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:34: note: in expansion of macro 'USS_ECHO_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/Blink/Blink.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::playNote(unsigned int, unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:367:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:372:5: error: '::tone' has not been declared
::tone(_pin, freq);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:376:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::noTone() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:380:5: error: '::noTone' has not been declared
::noTone(_pin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::beep(long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:384:5: error: '::tone' has not been declared
::tone(_pin, BEEP_FREQ, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:20: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:26: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:51:17: error: 'PA5' was not declared in this scope
#define R2A_PIN PA5 //Right motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:60: note: in expansion of macro 'R2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:52:22: error: 'PA14' was not declared in this scope
#define USS_TRIG_PIN PA14 //Ultrasonic sensor trigger on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:20: note: in expansion of macro 'USS_TRIG_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:53:22: error: 'PA13' was not declared in this scope
#define USS_ECHO_PIN PA13 //Ultrasonic sensor echo on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:34: note: in expansion of macro 'USS_ECHO_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/BlinkToggle/BlinkToggle.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::playNote(unsigned int, unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:367:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:372:5: error: '::tone' has not been declared
::tone(_pin, freq);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:376:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::noTone() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:380:5: error: '::noTone' has not been declared
::noTone(_pin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::beep(long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:384:5: error: '::tone' has not been declared
::tone(_pin, BEEP_FREQ, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:20: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:26: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:51:17: error: 'PA5' was not declared in this scope
#define R2A_PIN PA5 //Right motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:60: note: in expansion of macro 'R2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:52:22: error: 'PA14' was not declared in this scope
#define USS_TRIG_PIN PA14 //Ultrasonic sensor trigger on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:20: note: in expansion of macro 'USS_TRIG_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:53:22: error: 'PA13' was not declared in this scope
#define USS_ECHO_PIN PA13 //Ultrasonic sensor echo on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:34: note: in expansion of macro 'USS_ECHO_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::playNote(unsigned int, unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:367:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:372:5: error: '::tone' has not been declared
::tone(_pin, freq);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:376:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::noTone() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:380:5: error: '::noTone' has not been declared
::noTone(_pin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::beep(long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:384:5: error: '::tone' has not been declared
::tone(_pin, BEEP_FREQ, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:20: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:26: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:51:17: error: 'PA5' was not declared in this scope
#define R2A_PIN PA5 //Right motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:60: note: in expansion of macro 'R2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:52:22: error: 'PA14' was not declared in this scope
#define USS_TRIG_PIN PA14 //Ultrasonic sensor trigger on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:20: note: in expansion of macro 'USS_TRIG_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:53:22: error: 'PA13' was not declared in this scope
#define USS_ECHO_PIN PA13 //Ultrasonic sensor echo on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:34: note: in expansion of macro 'USS_ECHO_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino: In function 'bool getPin(uint8_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino:149:36: error: 'PA8' was not declared in this scope
static const uint8_t pinMap[] = {PA8, PB2, PB5, PB6, PB7};
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino:149:41: error: 'PB2' was not declared in this scope
static const uint8_t pinMap[] = {PA8, PB2, PB5, PB6, PB7};
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/DefaultSTEAMbot/DefaultSTEAMbot.ino:149:46: error: 'PB5' was not declared in this scope
static const uint8_t pinMap[] = {PA8, PB2, PB5, PB6, PB7};
^
/home/ec2-user/arduino-testlib/cli-datadir/use
Result: FAIL
WARNING: library STEAMbot claims to run on arm, STM32F1 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/examples/PushButtonLED/PushButtonLED.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::playNote(unsigned int, unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:367:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:372:5: error: '::tone' has not been declared
::tone(_pin, freq);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::tone(unsigned int, long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:376:5: error: '::tone' has not been declared
::tone(_pin, freq, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::noTone() const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:380:5: error: '::noTone' has not been declared
::noTone(_pin);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbSpeaker::beep(long unsigned int) const':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:384:5: error: '::tone' has not been declared
::tone(_pin, BEEP_FREQ, dur);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'sbMotor::sbMotor(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:402:17: error: 'PWM' was not declared in this scope
pinMode(ia, PWM);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::stop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:412:20: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, 0);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In member function 'void sbMotor::run(int16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:446:26: error: 'pwmWrite' was not declared in this scope
pwmWrite(_ia, speed);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: In constructor 'STEAMbot::STEAMbot(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:60:21: error: 'PC15' was not declared in this scope
#define SB_BT_RESET PC15
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:597:13: note: in expansion of macro 'SB_BT_RESET'
pinMode(SB_BT_RESET, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:54:24: error: 'PB8' was not declared in this scope
#define RUN_BUTTON_PIN PB8 //Run button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:20: note: in expansion of macro 'RUN_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:55:25: error: 'PC14' was not declared in this scope
#define STOP_BUTTON_PIN PC14 //Stop button
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:36: note: in expansion of macro 'STOP_BUTTON_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:45:21: error: 'PB0' was not declared in this scope
#define RED_LED_PIN PB0
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:53: note: in expansion of macro 'RED_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:47:23: error: 'PB1' was not declared in this scope
#define GREEN_LED_PIN PB1
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:66: note: in expansion of macro 'GREEN_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:46:22: error: 'PA7' was not declared in this scope
#define BLUE_LED_PIN PA7
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:609:81: note: in expansion of macro 'BLUE_LED_PIN'
extern STEAMbot sb(RUN_BUTTON_PIN, STOP_BUTTON_PIN, RED_LED_PIN, GREEN_LED_PIN, BLUE_LED_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:44:21: error: 'PA6' was not declared in this scope
#define SPEAKER_PIN PA6
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:20: note: in expansion of macro 'SPEAKER_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:48:17: error: 'PA0' was not declared in this scope
#define L1A_PIN PA0 //Left motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:33: note: in expansion of macro 'L1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:49:17: error: 'PA4' was not declared in this scope
#define L2A_PIN PA4 //Left motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:42: note: in expansion of macro 'L2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:50:17: error: 'PA1' was not declared in this scope
#define R1A_PIN PA1 //Right motor 1A
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:51: note: in expansion of macro 'R1A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:51:17: error: 'PA5' was not declared in this scope
#define R2A_PIN PA5 //Right motor 1B
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:610:60: note: in expansion of macro 'R2A_PIN'
SPEAKER_PIN, L1A_PIN, L2A_PIN, R1A_PIN, R2A_PIN,
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:52:22: error: 'PA14' was not declared in this scope
#define USS_TRIG_PIN PA14 //Ultrasonic sensor trigger on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:20: note: in expansion of macro 'USS_TRIG_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:53:22: error: 'PA13' was not declared in this scope
#define USS_ECHO_PIN PA13 //Ultrasonic sensor echo on connector P5
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STEAMbot/src/STEAMbot.h:611:34: note: in expansion of macro 'USS_ECHO_PIN'
USS_TRIG_PIN, USS_ECHO_PIN);
^