This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 2.0.0
More details
| Board | Claims compatibility | Inclusion | X_NUCLEO_IKS01A1_FreeFall |
X_NUCLEO_IKS01A1_MultiEvent |
X_NUCLEO_IKS01A1_WakeUp |
X_NUCLEO_IKS01A1_Tap |
X_NUCLEO_IKS01A1_Tilt |
X_NUCLEO_IKS01A1_6DOrientation |
X_NUCLEO_IKS01A1_DoubleTap |
X_NUCLEO_IKS01A1_LSM6DS3_DataLog_Terminal |
X_NUCLEO_IKS01A1_Pedometer |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | FAIL | PASS | FAIL |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7698 bytes (23%) of program storage space. Maximum is 32256 bytes. Global variables use 1586 bytes (77%) of dynamic memory, leaving 462 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
Sketch uses 6868 bytes (21%) of program storage space. Maximum is 32256 bytes. Global variables use 452 bytes (22%) of dynamic memory, leaving 1596 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6722 bytes (20%) of program storage space. Maximum is 32256 bytes. Global variables use 452 bytes (22%) of dynamic memory, leaving 1596 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7882 bytes (24%) of program storage space. Maximum is 32256 bytes. Global variables use 456 bytes (22%) of dynamic memory, leaving 1592 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 11344 bytes (35%) of program storage space. Maximum is 32256 bytes. Global variables use 1700 bytes (83%) of dynamic memory, leaving 348 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
Sketch uses 8464 bytes (26%) of program storage space. Maximum is 32256 bytes. Global variables use 710 bytes (34%) of dynamic memory, leaving 1338 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6724 bytes (20%) of program storage space. Maximum is 32256 bytes. Global variables use 452 bytes (22%) of dynamic memory, leaving 1596 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6544 bytes (20%) of program storage space. Maximum is 32256 bytes. Global variables use 446 bytes (21%) of dynamic memory, leaving 1602 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6550 bytes (20%) of program storage space. Maximum is 32256 bytes. Global variables use 450 bytes (21%) of dynamic memory, leaving 1598 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 83608 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44392 bytes (16%) of dynamic memory, leaving 225944 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 89074 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44944 bytes (16%) of dynamic memory, leaving 225392 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 88872 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 88638 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 88334 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44432 bytes (16%) of dynamic memory, leaving 225904 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 92024 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44944 bytes (16%) of dynamic memory, leaving 225392 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 88748 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44952 bytes (16%) of dynamic memory, leaving 225384 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 88696 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 88382 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 88388 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes. Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 11553 bytes (23%) of program storage space. Maximum is 49152 bytes.
Global variables use 973 bytes (15%) of dynamic memory, leaving 5171 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_6DOrientation/X_NUCLEO_IKS01A1_6DOrientation.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.cpp:43:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10712 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_DoubleTap/X_NUCLEO_IKS01A1_DoubleTap.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10577 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_FreeFall/X_NUCLEO_IKS01A1_FreeFall.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 11205 bytes (22%) of program storage space. Maximum is 49152 bytes.
Global variables use 523 bytes (8%) of dynamic memory, leaving 5621 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_LSM6DS3_DataLog_Terminal/X_NUCLEO_IKS01A1_LSM6DS3_DataLog_Terminal.ino:47:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.cpp:43:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 15149 bytes (30%) of program storage space. Maximum is 49152 bytes.
Global variables use 975 bytes (15%) of dynamic memory, leaving 5169 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_MultiEvent/X_NUCLEO_IKS01A1_MultiEvent.ino:49:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 12296 bytes (25%) of program storage space. Maximum is 49152 bytes.
Global variables use 979 bytes (15%) of dynamic memory, leaving 5165 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Pedometer/X_NUCLEO_IKS01A1_Pedometer.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10580 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Tap/X_NUCLEO_IKS01A1_Tap.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.cpp:43:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10400 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Tilt/X_NUCLEO_IKS01A1_Tilt.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10405 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_WakeUp/X_NUCLEO_IKS01A1_WakeUp.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 14780 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3656 bytes (11%) of dynamic memory, leaving 29112 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 20264 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 4096 bytes (12%) of dynamic memory, leaving 28672 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 19188 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 18952 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 19560 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3692 bytes (11%) of dynamic memory, leaving 29076 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 24964 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 4100 bytes (12%) of dynamic memory, leaving 28668 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 20700 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 4108 bytes (12%) of dynamic memory, leaving 28660 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 19016 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 18692 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 18700 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 204538 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13912 bytes (4%) of dynamic memory, leaving 313768 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_6DOrientation/X_NUCLEO_IKS01A1_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_6DOrientation/X_NUCLEO_IKS01A1_6DOrientation.ino:80:19: error: 'A2' was not declared in this scope
attachInterrupt(A2, INT1Event_cb, RISING);
^
Result: FAIL
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_DoubleTap/X_NUCLEO_IKS01A1_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_DoubleTap/X_NUCLEO_IKS01A1_DoubleTap.ino:77:19: error: 'A2' was not declared in this scope
attachInterrupt(A2, INT1Event_cb, RISING);
^
Result: FAIL
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_FreeFall/X_NUCLEO_IKS01A1_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_FreeFall/X_NUCLEO_IKS01A1_FreeFall.ino:77:19: error: 'A2' was not declared in this scope
attachInterrupt(A2, INT1Event_cb, RISING);
^
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 219026 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14200 bytes (4%) of dynamic memory, leaving 313480 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_MultiEvent/X_NUCLEO_IKS01A1_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_MultiEvent/X_NUCLEO_IKS01A1_MultiEvent.ino:83:19: error: 'A2' was not declared in this scope
attachInterrupt(A2, INT1Event_cb, RISING);
^
Result: FAIL
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Pedometer/X_NUCLEO_IKS01A1_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Pedometer/X_NUCLEO_IKS01A1_Pedometer.ino:82:19: error: 'A2' was not declared in this scope
attachInterrupt(A2, INT1Event_cb, RISING);
^
Result: FAIL
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Tap/X_NUCLEO_IKS01A1_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Tap/X_NUCLEO_IKS01A1_Tap.ino:77:19: error: 'A2' was not declared in this scope
attachInterrupt(A2, INT1Event_cb, RISING);
^
Result: FAIL
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Tilt/X_NUCLEO_IKS01A1_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/examples/X_NUCLEO_IKS01A1_Tilt/X_NUCLEO_IKS01A1_Tilt.ino:77:19: error: 'A2' was not declared in this scope
attachInterrupt(A2, INT1Event_cb, RISING);
^
Result: PASS
WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 219226 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14688 bytes (4%) of dynamic memory, leaving 312992 bytes for local variables. Maximum is 327680 bytes.