STM32duino LSM6DSL - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

STM32duino LSM6DSL

Version: 2.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	DISCO_IOT_6DOrientation	DISCO_IOT_FreeFall	DISCO_IOT_LSM6DSL_DataLog_Terminal	DISCO_IOT_Pedometer	DISCO_IOT_Tap	DISCO_IOT_WakeUp	DISCO_IOT_DoubleTap	DISCO_IOT_MultiEvent	DISCO_IOT_Tilt
arduino:avr:uno 1.8.4	No ⚠️	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/DISCO_IOT_6DOrientation

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: note: suggested alternative: 'PD1'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_DoubleTap

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: note: suggested alternative: 'PD1'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_FreeFall

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: note: suggested alternative: 'PD1'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_LSM6DSL_DataLog_Terminal

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~

examples/DISCO_IOT_MultiEvent

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: note: suggested alternative: 'PD1'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Pedometer

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: note: suggested alternative: 'PD1'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Tap

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: note: suggested alternative: 'PD1'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Tilt

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: note: suggested alternative: 'PD1'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_WakeUp

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: note: suggested alternative: 'PD1'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83608 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44392 bytes (16%) of dynamic memory, leaving 225944 bytes for local variables. Maximum is 270336 bytes.

examples/DISCO_IOT_6DOrientation

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_DoubleTap

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_FreeFall

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_LSM6DSL_DataLog_Terminal

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~

examples/DISCO_IOT_MultiEvent

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Pedometer

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Tap

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Tilt

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_WakeUp

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.

examples/DISCO_IOT_6DOrientation

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_DoubleTap

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_FreeFall

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_LSM6DSL_DataLog_Terminal

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:43:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~

examples/DISCO_IOT_MultiEvent

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:51:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Pedometer

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Tap

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Tilt

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_WakeUp

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: note: suggested alternative: 'B111'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 14780 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3656 bytes (11%) of dynamic memory, leaving 29112 bytes for local variables. Maximum is 32768 bytes.

examples/DISCO_IOT_6DOrientation

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: note: suggested alternative: '._11'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_DoubleTap

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: note: suggested alternative: '._11'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_FreeFall

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: note: suggested alternative: '._11'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_LSM6DSL_DataLog_Terminal

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~

examples/DISCO_IOT_MultiEvent

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: note: suggested alternative: '._11'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Pedometer

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: note: suggested alternative: '._11'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Tap

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: note: suggested alternative: '._11'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_Tilt

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: note: suggested alternative: '._11'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

examples/DISCO_IOT_WakeUp

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: note: suggested alternative: 'B11'
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: note: suggested alternative: 'B10'
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: note: suggested alternative: '._11'
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 204538 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13912 bytes (4%) of dynamic memory, leaving 313768 bytes for local variables. Maximum is 327680 bytes.

examples/DISCO_IOT_6DOrientation

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_6DOrientation/DISCO_IOT_6DOrientation.ino:74:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^

examples/DISCO_IOT_DoubleTap

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_DoubleTap/DISCO_IOT_DoubleTap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^

examples/DISCO_IOT_FreeFall

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_FreeFall/DISCO_IOT_FreeFall.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^

examples/DISCO_IOT_LSM6DSL_DataLog_Terminal

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:47:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:46:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_LSM6DSL_DataLog_Terminal/DISCO_IOT_LSM6DSL_DataLog_Terminal.ino:50:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^

examples/DISCO_IOT_MultiEvent

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:55:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:54:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:59:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:56:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_MultiEvent/DISCO_IOT_MultiEvent.ino:79:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^

examples/DISCO_IOT_Pedometer

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Pedometer/DISCO_IOT_Pedometer.ino:76:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^

examples/DISCO_IOT_Tap

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tap/DISCO_IOT_Tap.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^

examples/DISCO_IOT_Tilt

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_Tilt/DISCO_IOT_Tilt.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^

examples/DISCO_IOT_WakeUp

Result: FAIL

WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:48:21: error: 'PB11' was not declared in this scope
 #define I2C2_SDA    PB11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:17: note: in expansion of macro 'I2C2_SDA'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:47:21: error: 'PB10' was not declared in this scope
 #define I2C2_SCL    PB10
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:52:27: note: in expansion of macro 'I2C2_SCL'
 TwoWire dev_i2c(I2C2_SDA, I2C2_SCL);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:49:21: error: 'PD11' was not declared in this scope
 #define INT1        PD11
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/examples/DISCO_IOT_WakeUp/DISCO_IOT_WakeUp.ino:71:19: note: in expansion of macro 'INT1'
   attachInterrupt(INT1, INT1Event_cb, RISING);
                   ^