STM32duino STTS751 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

STM32duino STTS751

Version: 2.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion
arduino:avr:uno 1.8.4	No ⚠️	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS
arduino:samd:mkrwifi1010 1.8.12	No	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library STM32duino_STTS751 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library STM32duino_STTS751 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h:47:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.cpp:41:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t STTS751Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library STM32duino_STTS751 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.cpp:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h:71:27: error: expected ')' before '*' token
     STTS751Sensor(TwoWire *i2c, uint8_t address=STTS751_1xxxx_ADD_7K5);
                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h:148:5: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
     TwoWire *dev_i2c;
     ^~~~~~~
     TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h: In member function 'uint8_t STTS751Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h:101:11: error: 'dev_i2c' was not declared in this scope
       if (dev_i2c) {
           ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h:101:11: note: suggested alternative: 'dev_t'
       if (dev_i2c) {
           ^~~~~~~
           dev_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h: In member function 'uint8_t STTS751Sensor::IO_Write(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h:129:11: error: 'dev_i2c' was not declared in this scope
       if (dev_i2c) {
           ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.h:129:11: note: suggested alternative: 'dev_t'
       if (dev_i2c) {
           ^~~~~~~
           dev_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_STTS751/src/STTS751Sensor.cpp:50:29: error: expected constructor, destructor, or type conversion before '(' token
 STTS751Sensor::STTS751Sensor(TwoWire *i2c, uint8_t address) : dev_i2c(i2c), address(address)
                             ^

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library STM32duino_STTS751 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 202770 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13872 bytes (4%) of dynamic memory, leaving 313808 bytes for local variables. Maximum is 327680 bytes.