This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 2.0.1
More details
| Board | Claims compatibility | Inclusion | DISCO_IOT_53L0A1_DataLogTerminal |
DISCO_IOT_53L0A1_Gesture_Swipe1 |
DISCO_IOT_53L0A1_Gesture_Tap1 |
|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | FAIL | FAIL |
Result: PASS
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
Result: PASS
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:48:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library STM32duino_Proximity_Gesture claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:50:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library STM32duino_Proximity_Gesture claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:50:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
Result: PASS
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_class.h:47:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_class.cpp:41:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'VL53L0X_Error VL53L0X::VL53L0X_I2CRead(uint8_t, uint8_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:48:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:48:32: note: suggested alternative: 'PC'
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
PC
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library STM32duino_Proximity_Gesture claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:50:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:50:32: note: suggested alternative: 'PC'
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
PC
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library STM32duino_Proximity_Gesture claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:50:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:50:32: note: suggested alternative: 'PC'
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
PC
Result: PASS
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 13684 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:48:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library STM32duino_Proximity_Gesture claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:50:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library STM32duino_Proximity_Gesture claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: note: suggested alternative: 'B11'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: note: suggested alternative: 'B10'
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^~~~
B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:50:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^~~
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 204434 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_device.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_def.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_class.h:49,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_class.cpp:41:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_types.h:56:108: note: #pragma message: Please review type definition of STDINT define for your platform and add to list above
#pragma message("Please review type definition of STDINT define for your platform and add to list above ")
^
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_device.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_def.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_class.h:49,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_types.h:56:108: note: #pragma message: Please review type definition of STDINT define for your platform and add to list above
#pragma message("Please review type definition of STDINT define for your platform and add to list above ")
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:47:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_DataLogTerminal/DISCO_IOT_53L0A1_DataLogTerminal.ino:48:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library STM32duino_Proximity_Gesture claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_device.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_def.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_class.h:49,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_types.h:56:108: note: #pragma message: Please review type definition of STDINT define for your platform and add to list above
#pragma message("Please review type definition of STDINT define for your platform and add to list above ")
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Swipe1/DISCO_IOT_53L0A1_Gesture_Swipe1.ino:50:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^
Result: FAIL
WARNING: library STM32duino_VL53L0X claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library STM32duino_Proximity_Gesture claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_device.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_def.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_class.h:49,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/src/vl53l0x_types.h:56:108: note: #pragma message: Please review type definition of STDINT define for your platform and add to list above
#pragma message("Please review type definition of STDINT define for your platform and add to list above ")
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:15: error: 'PB11' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:49:21: error: 'PB10' was not declared in this scope
TwoWire WIRE1(PB11, PB10); //SDA=PB11 & SCL=PB10
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L0X/examples/DISCO_IOT_53L0A1_Gesture_Tap1/DISCO_IOT_53L0A1_Gesture_Tap1.ino:50:32: error: 'PC6' was not declared in this scope
VL53L0X sensor_vl53l0x(&WIRE1, PC6); //XSHUT=PC6
^