STM32duino VL53L1 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

STM32duino VL53L1

Version: 2.1.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	VL53L1_Sat_HelloWorld	VL53L1_Sat_HelloWorld_Interrupt
arduino:avr:uno 1.8.4	No ⚠️	PASS	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/VL53L1_Sat_HelloWorld

Result: FAIL

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 65726 bytes (203%) of program storage space. Maximum is 32256 bytes.
Global variables use 9690 bytes (473%) of dynamic memory, leaving -7642 bytes for local variables. Maximum is 2048 bytes.
Sketch too big; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing it.

examples/VL53L1_Sat_HelloWorld_Interrupt

Result: FAIL

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 65960 bytes (204%) of program storage space. Maximum is 32256 bytes.
Global variables use 9698 bytes (473%) of dynamic memory, leaving -7650 bytes for local variables. Maximum is 2048 bytes.
Sketch too big; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing it.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/VL53L1_Sat_HelloWorld

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 120398 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 53672 bytes (19%) of dynamic memory, leaving 216664 bytes for local variables. Maximum is 270336 bytes.

examples/VL53L1_Sat_HelloWorld_Interrupt

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 121518 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 53928 bytes (19%) of dynamic memory, leaving 216408 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.

examples/VL53L1_Sat_HelloWorld

Result: FAIL

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 65953 bytes (134%) of program storage space. Maximum is 49152 bytes.
Global variables use 9562 bytes (155%) of dynamic memory, leaving -3418 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L1/src/vl53l1_class.h:34:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L1/src/vl53l1_class.cpp:66:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'VL53L1_Error VL53L1::VL53L1_I2CRead(uint8_t, uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
Sketch too big; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing it.

examples/VL53L1_Sat_HelloWorld_Interrupt

Result: FAIL

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 66604 bytes (135%) of program storage space. Maximum is 49152 bytes.
Global variables use 9756 bytes (158%) of dynamic memory, leaving -3612 bytes for local variables. Maximum is 6144 bytes.
Sketch too big; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing it.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/VL53L1_Sat_HelloWorld

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 62960 bytes (24%) of program storage space. Maximum is 262144 bytes.
Global variables use 13036 bytes (39%) of dynamic memory, leaving 19732 bytes for local variables. Maximum is 32768 bytes.

examples/VL53L1_Sat_HelloWorld_Interrupt

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 63380 bytes (24%) of program storage space. Maximum is 262144 bytes.
Global variables use 13180 bytes (40%) of dynamic memory, leaving 19588 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 210658 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14056 bytes (4%) of dynamic memory, leaving 313624 bytes for local variables. Maximum is 327680 bytes.

examples/VL53L1_Sat_HelloWorld

Result: FAIL

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L1/examples/VL53L1_Sat_HelloWorld/VL53L1_Sat_HelloWorld.ino:70:36: error: 'A1' was not declared in this scope
 VL53L1 sensor_vl53l1_sat(&DEV_I2C, A1);
                                    ^

examples/VL53L1_Sat_HelloWorld_Interrupt

Result: FAIL

WARNING: library STM32duino_VL53L1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L1/examples/VL53L1_Sat_HelloWorld_Interrupt/VL53L1_Sat_HelloWorld_Interrupt.ino:77:36: error: 'A1' was not declared in this scope
 VL53L1 sensor_vl53l1_sat(&DEV_I2C, A1);
                                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L1/examples/VL53L1_Sat_HelloWorld_Interrupt/VL53L1_Sat_HelloWorld_Interrupt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L1/examples/VL53L1_Sat_HelloWorld_Interrupt/VL53L1_Sat_HelloWorld_Interrupt.ino:74:22: error: 'A2' was not declared in this scope
 #define interruptPin A2
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_VL53L1/examples/VL53L1_Sat_HelloWorld_Interrupt/VL53L1_Sat_HelloWorld_Interrupt.ino:91:12: note: in expansion of macro 'interruptPin'
    pinMode(interruptPin, INPUT_PULLUP);
            ^