STM32duino X-NUCLEO-GNSS1A1 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

STM32duino X-NUCLEO-GNSS1A1

Version: 1.0.5
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	X_NUCLEO_GNSS1A1_MicroNMEA_UART	X_NUCLEO_GNSS1A1_VirtualCOMPort	X_NUCLEO_GNSS1A1_HelloWorld_I2C	X_NUCLEO_GNSS1A1_HelloWorld_UART	X_NUCLEO_GNSS1A1_MicroNMEA_I2C
arduino:avr:uno 1.8.4	No ⚠️	PASS	FAIL	FAIL	FAIL	FAIL	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	PASS	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	PASS	FAIL	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	FAIL	PASS	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	PASS	FAIL	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C

Result: FAIL

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:77:4: error: 'DEV_I2C' was not declared in this scope
    DEV_I2C.begin();
    ^~~~~~~

examples/X_NUCLEO_GNSS1A1_HelloWorld_UART

Result: FAIL

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:79:4: error: 'Serial1' was not declared in this scope
    Serial1.begin(9600);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:79:4: note: suggested alternative: 'Serial'
    Serial1.begin(9600);
    ^~~~~~~
    Serial

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: PASS

Sketch uses 10308 bytes (31%) of program storage space. Maximum is 32256 bytes.
Global variables use 877 bytes (42%) of dynamic memory, leaving 1171 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART/X_NUCLEO_GNSS1A1_MicroNMEA_UART.ino:53:23: error: 'Serial1' was not declared in this scope
 HardwareSerial& gps = Serial1;
                       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART/X_NUCLEO_GNSS1A1_MicroNMEA_UART.ino:53:23: note: suggested alternative: 'Serial'
 HardwareSerial& gps = Serial1;
                       ^~~~~~~
                       Serial

examples/X_NUCLEO_GNSS1A1_VirtualCOMPort

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_VirtualCOMPort/X_NUCLEO_GNSS1A1_VirtualCOMPort.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_VirtualCOMPort/X_NUCLEO_GNSS1A1_VirtualCOMPort.ino:56:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200);
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_VirtualCOMPort/X_NUCLEO_GNSS1A1_VirtualCOMPort.ino:56:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200);
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_VirtualCOMPort/X_NUCLEO_GNSS1A1_VirtualCOMPort.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_VirtualCOMPort/X_NUCLEO_GNSS1A1_VirtualCOMPort.ino:68:5: error: 'Serial1' was not declared in this scope
     Serial1.write(fromPC[idxPC]);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_VirtualCOMPort/X_NUCLEO_GNSS1A1_VirtualCOMPort.ino:68:5: note: suggested alternative: 'Serial'
     Serial1.write(fromPC[idxPC]);
     ^~~~~~~
     Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_VirtualCOMPort/X_NUCLEO_GNSS1A1_VirtualCOMPort.ino:72:6: error: 'Serial1' was not declared in this scope
   if(Serial1.available()){
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_VirtualCOMPort/X_NUCLEO_GNSS1A1_VirtualCOMPort.ino:72:6: note: suggested alternative: 'Serial'
   if(Serial1.available()){
      ^~~~~~~
      Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C

Result: FAIL

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:77:4: error: 'DEV_I2C' was not declared in this scope
    DEV_I2C.begin();
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:77:4: note: suggested alternative: 'DEVICE_I2C'
    DEV_I2C.begin();
    ^~~~~~~
    DEVICE_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void printValidInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:430:7: error: 'dtostrf' was not declared in this scope
       dtostrf (data.gpgga_data.xyz.alt, 3, 2, alt);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:430:7: note: suggested alternative: 'strstr'
       dtostrf (data.gpgga_data.xyz.alt, 3, 2, alt);
       ^~~~~~~
       strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void getGNSInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:526:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gns_data.xyz.alt, 2, 2, alt);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:526:4: note: suggested alternative: 'strstr'
    dtostrf (data.gns_data.xyz.alt, 2, 2, alt);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void getGPGSTInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:580:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gpgst_data.EHPE, 2, 1, ephe);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:580:4: note: suggested alternative: 'strstr'
    dtostrf (data.gpgst_data.EHPE, 2, 1, ephe);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void getGPRMCInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:661:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gprmc_data.speed, 2, 1, speed);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:661:4: note: suggested alternative: 'strstr'
    dtostrf (data.gprmc_data.speed, 2, 1, speed);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void getGSAInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:793:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gsa_data.pdop, 2, 1, pdop);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:793:4: note: suggested alternative: 'strstr'
    dtostrf (data.gsa_data.pdop, 2, 1, pdop);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void printTrackedPositions(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:949:7: error: 'dtostrf' was not declared in this scope
       dtostrf (stored_positions[i].xyz.alt, 3, 2, alt);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:949:7: note: suggested alternative: 'strstr'
       dtostrf (stored_positions[i].xyz.alt, 3, 2, alt);
       ^~~~~~~
       strstr

examples/X_NUCLEO_GNSS1A1_HelloWorld_UART

Result: FAIL

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void printValidInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:433:7: error: 'dtostrf' was not declared in this scope
       dtostrf (data.gpgga_data.xyz.alt, 3, 2, alt);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:433:7: note: suggested alternative: 'strstr'
       dtostrf (data.gpgga_data.xyz.alt, 3, 2, alt);
       ^~~~~~~
       strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void getGNSInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:529:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gns_data.xyz.alt, 2, 2, alt);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:529:4: note: suggested alternative: 'strstr'
    dtostrf (data.gns_data.xyz.alt, 2, 2, alt);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void getGPGSTInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:583:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gpgst_data.EHPE, 2, 1, ephe);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:583:4: note: suggested alternative: 'strstr'
    dtostrf (data.gpgst_data.EHPE, 2, 1, ephe);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void getGPRMCInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:664:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gprmc_data.speed, 2, 1, speed);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:664:4: note: suggested alternative: 'strstr'
    dtostrf (data.gprmc_data.speed, 2, 1, speed);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void getGSAInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:796:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gsa_data.pdop, 2, 1, pdop);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:796:4: note: suggested alternative: 'strstr'
    dtostrf (data.gsa_data.pdop, 2, 1, pdop);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void printTrackedPositions(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:952:7: error: 'dtostrf' was not declared in this scope
       dtostrf (stored_positions[i].xyz.alt, 3, 2, alt);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:952:7: note: suggested alternative: 'strstr'
       dtostrf (stored_positions[i].xyz.alt, 3, 2, alt);
       ^~~~~~~
       strstr

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:65:16: error: 'DEV_I2C' was not declared in this scope
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:65:16: note: suggested alternative: 'DEVICE_I2C'
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
                DEVICE_I2C

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: PASS

Sketch uses 83186 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43868 bytes (16%) of dynamic memory, leaving 226468 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_GNSS1A1_VirtualCOMPort

Result: PASS

Sketch uses 79292 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43484 bytes (16%) of dynamic memory, leaving 226852 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/src/teseo_liv3f_class.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/src/teseo_liv3f_class.cpp:46:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'GNSS_StatusTypeDef TeseoLIV3F::I2CRead(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C

Result: FAIL

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:77:4: error: 'DEV_I2C' was not declared in this scope
    DEV_I2C.begin();
    ^~~~~~~

examples/X_NUCLEO_GNSS1A1_HelloWorld_UART

Result: PASS

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 37225 bytes (75%) of program storage space. Maximum is 49152 bytes.
Global variables use 5171 bytes (84%) of dynamic memory, leaving 973 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/src/teseo_liv3f_class.h:44:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/src/teseo_liv3f_class.cpp:46:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'GNSS_StatusTypeDef TeseoLIV3F::I2CRead(uint16_t, uint8_t*, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
Low memory available, stability problems may occur.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:65:16: error: 'DEV_I2C' was not declared in this scope
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:44:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'void readI2C(char*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: PASS

Sketch uses 9229 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 675 bytes (10%) of dynamic memory, leaving 5469 bytes for local variables. Maximum is 6144 bytes.

examples/X_NUCLEO_GNSS1A1_VirtualCOMPort

Result: PASS

Sketch uses 3452 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 372 bytes (6%) of dynamic memory, leaving 5772 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C

Result: FAIL

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:77:4: error: 'DEV_I2C' was not declared in this scope
    DEV_I2C.begin();
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:77:4: note: suggested alternative: 'REV_I2S'
    DEV_I2C.begin();
    ^~~~~~~
    REV_I2S
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void printValidInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:430:7: error: 'dtostrf' was not declared in this scope
       dtostrf (data.gpgga_data.xyz.alt, 3, 2, alt);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:430:7: note: suggested alternative: 'strstr'
       dtostrf (data.gpgga_data.xyz.alt, 3, 2, alt);
       ^~~~~~~
       strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void getGNSInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:526:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gns_data.xyz.alt, 2, 2, alt);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:526:4: note: suggested alternative: 'strstr'
    dtostrf (data.gns_data.xyz.alt, 2, 2, alt);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void getGPGSTInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:580:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gpgst_data.EHPE, 2, 1, ephe);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:580:4: note: suggested alternative: 'strstr'
    dtostrf (data.gpgst_data.EHPE, 2, 1, ephe);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void getGPRMCInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:661:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gprmc_data.speed, 2, 1, speed);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:661:4: note: suggested alternative: 'strstr'
    dtostrf (data.gprmc_data.speed, 2, 1, speed);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void getGSAInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:793:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gsa_data.pdop, 2, 1, pdop);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:793:4: note: suggested alternative: 'strstr'
    dtostrf (data.gsa_data.pdop, 2, 1, pdop);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void printTrackedPositions(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:949:7: error: 'dtostrf' was not declared in this scope
       dtostrf (stored_positions[i].xyz.alt, 3, 2, alt);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:949:7: note: suggested alternative: 'strstr'
       dtostrf (stored_positions[i].xyz.alt, 3, 2, alt);
       ^~~~~~~
       strstr

examples/X_NUCLEO_GNSS1A1_HelloWorld_UART

Result: FAIL

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void printValidInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:433:7: error: 'dtostrf' was not declared in this scope
       dtostrf (data.gpgga_data.xyz.alt, 3, 2, alt);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:433:7: note: suggested alternative: 'strstr'
       dtostrf (data.gpgga_data.xyz.alt, 3, 2, alt);
       ^~~~~~~
       strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void getGNSInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:529:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gns_data.xyz.alt, 2, 2, alt);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:529:4: note: suggested alternative: 'strstr'
    dtostrf (data.gns_data.xyz.alt, 2, 2, alt);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void getGPGSTInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:583:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gpgst_data.EHPE, 2, 1, ephe);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:583:4: note: suggested alternative: 'strstr'
    dtostrf (data.gpgst_data.EHPE, 2, 1, ephe);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void getGPRMCInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:664:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gprmc_data.speed, 2, 1, speed);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:664:4: note: suggested alternative: 'strstr'
    dtostrf (data.gprmc_data.speed, 2, 1, speed);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void getGSAInfo()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:796:4: error: 'dtostrf' was not declared in this scope
    dtostrf (data.gsa_data.pdop, 2, 1, pdop);
    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:796:4: note: suggested alternative: 'strstr'
    dtostrf (data.gsa_data.pdop, 2, 1, pdop);
    ^~~~~~~
    strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino: In function 'void printTrackedPositions(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:952:7: error: 'dtostrf' was not declared in this scope
       dtostrf (stored_positions[i].xyz.alt, 3, 2, alt);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_UART/X_NUCLEO_GNSS1A1_HelloWorld_UART.ino:952:7: note: suggested alternative: 'strstr'
       dtostrf (stored_positions[i].xyz.alt, 3, 2, alt);
       ^~~~~~~
       strstr

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
                 from /tmp/arduino-sketch-0504B5E47893CE83E460198FCE2BFFC0/sketch/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:222:37: error: invalid initialization of reference of type 'arduino::HardwareSerial&' from expression of type 'Serial_'
 #define Serial                      SerialUSB
                                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:64:27: note: in expansion of macro 'Serial'
 HardwareSerial& console = Serial;
                           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:65:16: error: 'DEV_I2C' was not declared in this scope
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:65:16: note: suggested alternative: 'REV_I2S'
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
                REV_I2S

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
                 from /tmp/arduino-sketch-7B62DDFF716C4A9611DB35C21893E6C1/sketch/X_NUCLEO_GNSS1A1_MicroNMEA_UART.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:222:37: error: invalid initialization of reference of type 'arduino::HardwareSerial&' from expression of type 'Serial_'
 #define Serial                      SerialUSB
                                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART/X_NUCLEO_GNSS1A1_MicroNMEA_UART.ino:52:27: note: in expansion of macro 'Serial'
 HardwareSerial& console = Serial;
                           ^~~~~~

examples/X_NUCLEO_GNSS1A1_VirtualCOMPort

Result: PASS

Sketch uses 12352 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3036 bytes (9%) of dynamic memory, leaving 29732 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 202514 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C

Result: FAIL

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_HelloWorld_I2C/X_NUCLEO_GNSS1A1_HelloWorld_I2C.ino:77:4: error: 'DEV_I2C' was not declared in this scope
    DEV_I2C.begin();
    ^

examples/X_NUCLEO_GNSS1A1_HelloWorld_UART

Result: PASS

WARNING: library STM32duino_X-NUCLEO-GNSS1A1 claims to run on stm32, sam, stm32l0 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 240746 bytes (18%) of program storage space. Maximum is 1310720 bytes.
Global variables use 20544 bytes (6%) of dynamic memory, leaving 307136 bytes for local variables. Maximum is 327680 bytes.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-GNSS1A1/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:65:16: error: 'DEV_I2C' was not declared in this scope
 TwoWire& gps = DEV_I2C;
                ^

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: PASS

Sketch uses 208514 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14080 bytes (4%) of dynamic memory, leaving 313600 bytes for local variables. Maximum is 327680 bytes.

examples/X_NUCLEO_GNSS1A1_VirtualCOMPort

Result: PASS

Sketch uses 204730 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13456 bytes (4%) of dynamic memory, leaving 314224 bytes for local variables. Maximum is 327680 bytes.