STM32duino X-NUCLEO-IKS01A1 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

STM32duino X-NUCLEO-IKS01A1

Version: 1.1.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	X_NUCLEO_IKS01A1_Pedometer	X_NUCLEO_IKS01A1_WakeUp	X_NUCLEO_IKS01A1_FreeFall	X_NUCLEO_IKS01A1_HelloWorld	X_NUCLEO_IKS01A1_MultiEvent	X_NUCLEO_IKS01A1_Tap	X_NUCLEO_IKS01A1_Tilt	X_NUCLEO_IKS01A1_6DOrientation	X_NUCLEO_IKS01A1_DoubleTap
arduino:avr:uno 1.8.4	No ⚠️	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL	PASS	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-IKS01A1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_IKS01A1_6DOrientation

Result: PASS

Sketch uses 7698 bytes (23%) of program storage space. Maximum is 32256 bytes.
Global variables use 1586 bytes (77%) of dynamic memory, leaving 462 bytes for local variables. Maximum is 2048 bytes.
Low memory available, stability problems may occur.

examples/X_NUCLEO_IKS01A1_DoubleTap

Result: PASS

Sketch uses 6868 bytes (21%) of program storage space. Maximum is 32256 bytes.
Global variables use 452 bytes (22%) of dynamic memory, leaving 1596 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_IKS01A1_FreeFall

Result: PASS

Sketch uses 6722 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 452 bytes (22%) of dynamic memory, leaving 1596 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_IKS01A1_HelloWorld

Result: PASS

Sketch uses 12178 bytes (37%) of program storage space. Maximum is 32256 bytes.
Global variables use 562 bytes (27%) of dynamic memory, leaving 1486 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_IKS01A1_MultiEvent

Result: PASS

Sketch uses 11336 bytes (35%) of program storage space. Maximum is 32256 bytes.
Global variables use 1700 bytes (83%) of dynamic memory, leaving 348 bytes for local variables. Maximum is 2048 bytes.
Low memory available, stability problems may occur.

examples/X_NUCLEO_IKS01A1_Pedometer

Result: PASS

Sketch uses 8464 bytes (26%) of program storage space. Maximum is 32256 bytes.
Global variables use 710 bytes (34%) of dynamic memory, leaving 1338 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_IKS01A1_Tap

Result: PASS

Sketch uses 6724 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 452 bytes (22%) of dynamic memory, leaving 1596 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_IKS01A1_Tilt

Result: PASS

Sketch uses 6544 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 446 bytes (21%) of dynamic memory, leaving 1602 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_IKS01A1_WakeUp

Result: PASS

Sketch uses 6550 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 450 bytes (21%) of dynamic memory, leaving 1598 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-IKS01A1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_6DOrientation

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 89074 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44944 bytes (16%) of dynamic memory, leaving 225392 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_DoubleTap

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 88872 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_FreeFall

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 88638 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_HelloWorld

Result: PASS

WARNING: library STM32duino_HTS221 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library STM32duino_LPS25HB claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library STM32duino_LSM6DS0 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library STM32duino_LIS3MDL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 95768 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44480 bytes (16%) of dynamic memory, leaving 225856 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_MultiEvent

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 92016 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44944 bytes (16%) of dynamic memory, leaving 225392 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_Pedometer

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 88748 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44952 bytes (16%) of dynamic memory, leaving 225384 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_Tap

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 88696 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_Tilt

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 88382 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_IKS01A1_WakeUp

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 88388 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44688 bytes (16%) of dynamic memory, leaving 225648 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-IKS01A1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/X_NUCLEO_IKS01A1_6DOrientation

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 11553 bytes (23%) of program storage space. Maximum is 49152 bytes.
Global variables use 973 bytes (15%) of dynamic memory, leaving 5171 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_6DOrientation/X_NUCLEO_IKS01A1_6DOrientation.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_IKS01A1_DoubleTap

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10712 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_DoubleTap/X_NUCLEO_IKS01A1_DoubleTap.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.cpp:43:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_IKS01A1_FreeFall

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10577 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_FreeFall/X_NUCLEO_IKS01A1_FreeFall.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_IKS01A1_HelloWorld

Result: PASS

WARNING: library STM32duino_HTS221 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library STM32duino_LPS25HB claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library STM32duino_LSM6DS0 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library STM32duino_LIS3MDL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 15654 bytes (31%) of program storage space. Maximum is 49152 bytes.
Global variables use 548 bytes (8%) of dynamic memory, leaving 5596 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_HTS221/src/HTS221Sensor.h:47:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_HelloWorld/X_NUCLEO_IKS01A1_HelloWorld.ino:42:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t HTS221Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LPS25HBSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS0Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LIS3MDLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_HTS221/src/HTS221Sensor.cpp:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t HTS221Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LPS25HB/src/LPS25HBSensor.h:47:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LPS25HB/src/LPS25HBSensor.cpp:42:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LPS25HBSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LIS3MDL/src/LIS3MDLSensor.cpp:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LIS3MDLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_IKS01A1_MultiEvent

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 15139 bytes (30%) of program storage space. Maximum is 49152 bytes.
Global variables use 975 bytes (15%) of dynamic memory, leaving 5169 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_MultiEvent/X_NUCLEO_IKS01A1_MultiEvent.ino:49:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_IKS01A1_Pedometer

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 12296 bytes (25%) of program storage space. Maximum is 49152 bytes.
Global variables use 979 bytes (15%) of dynamic memory, leaving 5165 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Pedometer/X_NUCLEO_IKS01A1_Pedometer.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_IKS01A1_Tap

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10580 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Tap/X_NUCLEO_IKS01A1_Tap.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_IKS01A1_Tilt

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10400 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Tilt/X_NUCLEO_IKS01A1_Tilt.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_IKS01A1_WakeUp

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 10405 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 717 bytes (11%) of dynamic memory, leaving 5427 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DS3/src/LSM6DS3Sensor.h:48:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_WakeUp/X_NUCLEO_IKS01A1_WakeUp.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DS3Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-IKS01A1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_6DOrientation

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 20264 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 4096 bytes (12%) of dynamic memory, leaving 28672 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_DoubleTap

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 19188 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_FreeFall

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 18952 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_HelloWorld

Result: PASS

WARNING: library STM32duino_HTS221 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library STM32duino_LPS25HB claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library STM32duino_LSM6DS0 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library STM32duino_LIS3MDL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 38484 bytes (14%) of program storage space. Maximum is 262144 bytes.
Global variables use 3740 bytes (11%) of dynamic memory, leaving 29028 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_MultiEvent

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 24956 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 4100 bytes (12%) of dynamic memory, leaving 28668 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_Pedometer

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 20700 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 4108 bytes (12%) of dynamic memory, leaving 28660 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_Tap

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 19016 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_Tilt

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 18692 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_IKS01A1_WakeUp

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 18700 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3840 bytes (11%) of dynamic memory, leaving 28928 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-IKS01A1 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.

examples/X_NUCLEO_IKS01A1_6DOrientation

Result: FAIL

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_6DOrientation/X_NUCLEO_IKS01A1_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_6DOrientation/X_NUCLEO_IKS01A1_6DOrientation.ino:75:19: error: 'A2' was not declared in this scope
   attachInterrupt(A2, INT1Event_cb, RISING);
                   ^

examples/X_NUCLEO_IKS01A1_DoubleTap

Result: FAIL

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_DoubleTap/X_NUCLEO_IKS01A1_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_DoubleTap/X_NUCLEO_IKS01A1_DoubleTap.ino:72:19: error: 'A2' was not declared in this scope
   attachInterrupt(A2, INT1Event_cb, RISING);
                   ^

examples/X_NUCLEO_IKS01A1_FreeFall

Result: FAIL

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_FreeFall/X_NUCLEO_IKS01A1_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_FreeFall/X_NUCLEO_IKS01A1_FreeFall.ino:72:19: error: 'A2' was not declared in this scope
   attachInterrupt(A2, INT1Event_cb, RISING);
                   ^

examples/X_NUCLEO_IKS01A1_HelloWorld

Result: PASS

WARNING: library STM32duino_HTS221 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library STM32duino_LPS25HB claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library STM32duino_LSM6DS0 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library STM32duino_LIS3MDL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 224726 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14272 bytes (4%) of dynamic memory, leaving 313408 bytes for local variables. Maximum is 327680 bytes.

examples/X_NUCLEO_IKS01A1_MultiEvent

Result: FAIL

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_MultiEvent/X_NUCLEO_IKS01A1_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_MultiEvent/X_NUCLEO_IKS01A1_MultiEvent.ino:75:19: error: 'A2' was not declared in this scope
   attachInterrupt(A2, INT1Event_cb, RISING);
                   ^

examples/X_NUCLEO_IKS01A1_Pedometer

Result: FAIL

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Pedometer/X_NUCLEO_IKS01A1_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Pedometer/X_NUCLEO_IKS01A1_Pedometer.ino:77:19: error: 'A2' was not declared in this scope
   attachInterrupt(A2, INT1Event_cb, RISING);
                   ^

examples/X_NUCLEO_IKS01A1_Tap

Result: FAIL

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Tap/X_NUCLEO_IKS01A1_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Tap/X_NUCLEO_IKS01A1_Tap.ino:72:19: error: 'A2' was not declared in this scope
   attachInterrupt(A2, INT1Event_cb, RISING);
                   ^

examples/X_NUCLEO_IKS01A1_Tilt

Result: FAIL

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Tilt/X_NUCLEO_IKS01A1_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A1/examples/X_NUCLEO_IKS01A1_Tilt/X_NUCLEO_IKS01A1_Tilt.ino:72:19: error: 'A2' was not declared in this scope
   attachInterrupt(A2, INT1Event_cb, RISING);
                   ^

examples/X_NUCLEO_IKS01A1_WakeUp

Result: PASS

WARNING: library STM32duino_LSM6DS3 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 219226 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14688 bytes (4%) of dynamic memory, leaving 312992 bytes for local variables. Maximum is 327680 bytes.