This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.1.0
More details
| Board | Claims compatibility | Inclusion | X_NUCLEO_IKS01A2_Pedometer |
X_NUCLEO_IKS01A2_WakeUp |
X_NUCLEO_IKS01A2_6DOrientation |
X_NUCLEO_IKS01A2_DoubleTap |
X_NUCLEO_IKS01A2_FreeFall |
X_NUCLEO_IKS01A2_HelloWorld |
X_NUCLEO_IKS01A2_MultiEvent |
X_NUCLEO_IKS01A2_Tap |
X_NUCLEO_IKS01A2_Tilt |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library STM32duino_X-NUCLEO-IKS01A2 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:71:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:71:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: PASS
Sketch uses 14154 bytes (43%) of program storage space. Maximum is 32256 bytes. Global variables use 677 bytes (33%) of dynamic memory, leaving 1371 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:71:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:71:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:72:19: error: 'D5' was not declared in this scope
attachInterrupt(D5, INT2Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:72:19: note: suggested alternative: 'A5'
attachInterrupt(D5, INT2Event_cb, RISING);
^~
A5
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:73:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:73:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:68:19: error: 'D5' was not declared in this scope
attachInterrupt(D5, INT2Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:68:19: note: suggested alternative: 'A5'
attachInterrupt(D5, INT2Event_cb, RISING);
^~
A5
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library STM32duino_X-NUCLEO-IKS01A2 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:71:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:71:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: PASS
WARNING: library STM32duino_HTS221 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library STM32duino_LPS22HB claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library STM32duino_LSM303AGR claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 96248 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44488 bytes (16%) of dynamic memory, leaving 225848 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:71:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:71:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:72:19: error: 'D5' was not declared in this scope
attachInterrupt(D5, INT2Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:72:19: note: suggested alternative: 'A5'
attachInterrupt(D5, INT2Event_cb, RISING);
^~
A5
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:73:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:73:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:68:19: error: 'D5' was not declared in this scope
attachInterrupt(D5, INT2Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:68:19: note: suggested alternative: 'A5'
attachInterrupt(D5, INT2Event_cb, RISING);
^~
A5
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library STM32duino_X-NUCLEO-IKS01A2 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:71:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:71:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: PASS
WARNING: library STM32duino_HTS221 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library STM32duino_LPS22HB claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library STM32duino_LSM303AGR claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 17714 bytes (36%) of program storage space. Maximum is 49152 bytes.
Global variables use 553 bytes (9%) of dynamic memory, leaving 5591 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_HTS221/src/HTS221Sensor.h:47:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_HelloWorld/X_NUCLEO_IKS01A2_HelloWorld.ino:43:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t HTS221Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LPS22HBSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM303AGR_ACC_Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM303AGR_MAG_Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_HTS221/src/HTS221Sensor.cpp:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t HTS221Sensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:45:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:71:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:71:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:72:19: error: 'D5' was not declared in this scope
attachInterrupt(D5, INT2Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:72:19: note: suggested alternative: 'A5'
attachInterrupt(D5, INT2Event_cb, RISING);
^~
A5
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:73:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:73:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_LSM6DSL/src/LSM6DSLSensor.h:48:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:44:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t LSM6DSLSensor::IO_Read(uint8_t*, uint8_t, uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:68:19: error: 'D5' was not declared in this scope
attachInterrupt(D5, INT2Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:68:19: note: suggested alternative: 'A5'
attachInterrupt(D5, INT2Event_cb, RISING);
^~
A5
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library STM32duino_X-NUCLEO-IKS01A2 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:71:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_6DOrientation/X_NUCLEO_IKS01A2_6DOrientation.ino:71:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_DoubleTap/X_NUCLEO_IKS01A2_DoubleTap.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_FreeFall/X_NUCLEO_IKS01A2_FreeFall.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: PASS
WARNING: library STM32duino_HTS221 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). WARNING: library STM32duino_LPS22HB claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). WARNING: library STM32duino_LSM303AGR claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 39596 bytes (15%) of program storage space. Maximum is 262144 bytes. Global variables use 3748 bytes (11%) of dynamic memory, leaving 29020 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:71:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:71:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:72:19: error: 'D5' was not declared in this scope
attachInterrupt(D5, INT2Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_MultiEvent/X_NUCLEO_IKS01A2_MultiEvent.ino:72:19: note: suggested alternative: 'A5'
attachInterrupt(D5, INT2Event_cb, RISING);
^~
A5
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:73:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Pedometer/X_NUCLEO_IKS01A2_Pedometer.ino:73:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tap/X_NUCLEO_IKS01A2_Tap.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:68:19: error: 'D4' was not declared in this scope
attachInterrupt(D4, INT1Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_Tilt/X_NUCLEO_IKS01A2_Tilt.ino:68:19: note: suggested alternative: 'A4'
attachInterrupt(D4, INT1Event_cb, RISING);
^~
A4
Result: FAIL
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:68:19: error: 'D5' was not declared in this scope
attachInterrupt(D5, INT2Event_cb, RISING);
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-IKS01A2/examples/X_NUCLEO_IKS01A2_WakeUp/X_NUCLEO_IKS01A2_WakeUp.ino:68:19: note: suggested alternative: 'A5'
attachInterrupt(D5, INT2Event_cb, RISING);
^~
A5
Result: PASS
This library has no main header file so an empty one was created.
WARNING: library STM32duino_X-NUCLEO-IKS01A2 claims to run on stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 220406 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14944 bytes (4%) of dynamic memory, leaving 312736 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 219398 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14688 bytes (4%) of dynamic memory, leaving 312992 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 219130 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14688 bytes (4%) of dynamic memory, leaving 312992 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_HTS221 claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). WARNING: library STM32duino_LPS22HB claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). WARNING: library STM32duino_LSM303AGR claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 226646 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14288 bytes (4%) of dynamic memory, leaving 313392 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 223614 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14952 bytes (4%) of dynamic memory, leaving 312728 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 219022 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14960 bytes (4%) of dynamic memory, leaving 312720 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 219222 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14688 bytes (4%) of dynamic memory, leaving 312992 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 218786 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14688 bytes (4%) of dynamic memory, leaving 312992 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library STM32duino_LSM6DSL claims to run on stm32, avr, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 218882 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14688 bytes (4%) of dynamic memory, leaving 312992 bytes for local variables. Maximum is 327680 bytes.