STM32duino X-NUCLEO-S2915A1 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

STM32duino X-NUCLEO-S2915A1

Version: 1.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	X_NUCLEO_S2915A1_HelloWorld
arduino:avr:uno 1.8.4	No ⚠️	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-S2915A1 claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_S2915A1_HelloWorld

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_S2-LP/src/S2LP.h:63:10: fatal error: functional: No such file or directory
 #include <functional>
          ^~~~~~~~~~~~
compilation terminated.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-S2915A1 claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_S2915A1_HelloWorld

Result: FAIL

WARNING: library STM32duino_M95640-R claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library STM32duino_S2-LP claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_S2-LP/src/S2LP.h:373:14: error: 'FlagStatus' does not name a type; did you mean 'SFlagStatus'?
     volatile FlagStatus xTxDoneFlag;
              ^~~~~~~~~~
              SFlagStatus
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:54:23: error: 'PC13' was not declared in this scope
 const int buttonPin = PC13; // set buttonPin to digital pin PC13 */
                       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:54:23: note: suggested alternative: 'p13'
 const int buttonPin = PC13; // set buttonPin to digital pin PC13 */
                       ^~~~
                       p13
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:93:11: error: 'D7' was not declared in this scope
   pinMode(D7, OUTPUT);
           ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:93:11: note: suggested alternative: 'A7'
   pinMode(D7, OUTPUT);
           ^~
           A7
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:25: error: 'D11' was not declared in this scope
   devSPI = new SPIClass(D11, D12, D3);
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:25: note: suggested alternative: 'B11'
   devSPI = new SPIClass(D11, D12, D3);
                         ^~~
                         B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:30: error: 'D12' was not declared in this scope
   devSPI = new SPIClass(D11, D12, D3);
                              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:30: note: suggested alternative: 'p12'
   devSPI = new SPIClass(D11, D12, D3);
                              ^~~
                              p12
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:35: error: 'D3' was not declared in this scope
   devSPI = new SPIClass(D11, D12, D3);
                                   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:35: note: suggested alternative: 'A3'
   devSPI = new SPIClass(D11, D12, D3);
                                   ^~
                                   A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:37: error: invalid new-expression of abstract class type 'arduino::HardwareSPI'
   devSPI = new SPIClass(D11, D12, D3);
                                     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:41:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:104:7: note:   because the following virtual functions are pure within 'arduino::HardwareSPI':
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:101:35: error: 'D5' was not declared in this scope
   myM95640R = new M95640R(devSPI, D5);
                                   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:101:35: note: suggested alternative: 'A5'
   myM95640R = new M95640R(devSPI, D5);
                                   ^~
                                   A5

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-S2915A1 claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/X_NUCLEO_S2915A1_HelloWorld

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_S2-LP/src/S2LP.h:63:10: fatal error: functional: No such file or directory
 #include <functional>
          ^~~~~~~~~~~~
compilation terminated.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-S2915A1 claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_S2915A1_HelloWorld

Result: FAIL

WARNING: library STM32duino_M95640-R claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library STM32duino_S2-LP claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_S2-LP/src/S2LP.h:373:14: error: 'FlagStatus' does not name a type; did you mean 'SFlagStatus'?
     volatile FlagStatus xTxDoneFlag;
              ^~~~~~~~~~
              SFlagStatus
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:54:23: error: 'PC13' was not declared in this scope
 const int buttonPin = PC13; // set buttonPin to digital pin PC13 */
                       ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:54:23: note: suggested alternative: '._13'
 const int buttonPin = PC13; // set buttonPin to digital pin PC13 */
                       ^~~~
                       ._13
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:93:11: error: 'D7' was not declared in this scope
   pinMode(D7, OUTPUT);
           ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:25: error: 'D11' was not declared in this scope
   devSPI = new SPIClass(D11, D12, D3);
                         ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:25: note: suggested alternative: 'B11'
   devSPI = new SPIClass(D11, D12, D3);
                         ^~~
                         B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:30: error: 'D12' was not declared in this scope
   devSPI = new SPIClass(D11, D12, D3);
                              ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:35: error: 'D3' was not declared in this scope
   devSPI = new SPIClass(D11, D12, D3);
                                   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:35: note: suggested alternative: 'A3'
   devSPI = new SPIClass(D11, D12, D3);
                                   ^~
                                   A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:37: error: invalid new-expression of abstract class type 'arduino::HardwareSPI'
   devSPI = new SPIClass(D11, D12, D3);
                                     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:41:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:104:7: note:   because the following virtual functions are pure within 'arduino::HardwareSPI':
 class HardwareSPI
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:109:21: note: 	virtual uint8_t arduino::HardwareSPI::transfer(uint8_t)
     virtual uint8_t transfer(uint8_t data) = 0;
                     ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:110:22: note: 	virtual uint16_t arduino::HardwareSPI::transfer16(uint16_t)
     virtual uint16_t transfer16(uint16_t data) = 0;
                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:111:18: note: 	virtual void arduino::HardwareSPI::transfer(void*, size_t)
     virtual void transfer(void *buf, size_t count) = 0;
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:114:18: note: 	virtual void arduino::HardwareSPI::usingInterrupt(int)
     virtual void usingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:115:18: note: 	virtual void arduino::HardwareSPI::notUsingInterrupt(int)
     virtual void notUsingInterrupt(int interruptNumber) = 0;
                  ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:116:18: note: 	virtual void arduino::HardwareSPI::beginTransaction(arduino::SPISettings)
     virtual void beginTransaction(SPISettings settings) = 0;
                  ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:117:18: note: 	virtual void arduino::HardwareSPI::endTransaction()
     virtual void endTransaction(void) = 0;
                  ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:120:18: note: 	virtual void arduino::HardwareSPI::attachInterrupt()
     virtual void attachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:121:18: note: 	virtual void arduino::HardwareSPI::detachInterrupt()
     virtual void detachInterrupt() = 0;
                  ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:123:18: note: 	virtual void arduino::HardwareSPI::begin()
     virtual void begin() = 0;
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:124:18: note: 	virtual void arduino::HardwareSPI::end()
     virtual void end() = 0;
                  ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:101:35: error: 'D5' was not declared in this scope
   myM95640R = new M95640R(devSPI, D5);
                                   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:101:35: note: suggested alternative: 'A5'
   myM95640R = new M95640R(devSPI, D5);
                                   ^~
                                   A5

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

WARNING: library STM32duino_X-NUCLEO-S2915A1 claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.

examples/X_NUCLEO_S2915A1_HelloWorld

Result: FAIL

WARNING: library STM32duino_M95640-R claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library STM32duino_S2-LP claims to run on stm32, sam architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_S2-LP/src/S2LP.h:373:14: error: 'FlagStatus' does not name a type
     volatile FlagStatus xTxDoneFlag;
              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:43:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_S2-LP/src/S2LP.h:105:493: error: 'A2' was not declared in this scope
     S2LP(SPIClass *spi, int csn, int sdn, int irqn, uint32_t frequency=868000000, uint32_t xtalFrequency=50000000, PAInfo_t paInfo={.paRfRangeExtender=RANGE_EXT_NONE, .paSignalCSD_S2LP={S2LP_GPIO_0, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_TX_RX_MODE}, .paSignalCPS_S2LP={S2LP_GPIO_1, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_RX_STATE}, .paSignalCTX_S2LP={S2LP_GPIO_2, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_TX_STATE}, .paSignalCSD_MCU=A0, .paSignalCPS_MCU=A2, .paSignalCTX_MCU=A3, .paLevelValue=0x25}, S2LPGpioPin irq_gpio=S2LP_GPIO_3, uint8_t my_addr=0x44, uint8_t multicast_addr=0xEE, uint8_t broadcast_addr=0xFF);
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_S2-LP/src/S2LP.h:105:536: error: could not convert '{RANGE_EXT_NONE, {S2LP_GPIO_0, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_TX_RX_MODE}, {S2LP_GPIO_1, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_RX_STATE}, {S2LP_GPIO_2, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_TX_STATE}, A0, <expression error>, A3, 37}' from '<brace-enclosed initializer list>' to 'PAInfo_t {aka PAInfo_s}'
     S2LP(SPIClass *spi, int csn, int sdn, int irqn, uint32_t frequency=868000000, uint32_t xtalFrequency=50000000, PAInfo_t paInfo={.paRfRangeExtender=RANGE_EXT_NONE, .paSignalCSD_S2LP={S2LP_GPIO_0, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_TX_RX_MODE}, .paSignalCPS_S2LP={S2LP_GPIO_1, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_RX_STATE}, .paSignalCTX_S2LP={S2LP_GPIO_2, S2LP_GPIO_MODE_DIGITAL_OUTPUT_LP, S2LP_GPIO_DIG_OUT_TX_STATE}, .paSignalCSD_MCU=A0, .paSignalCPS_MCU=A2, .paSignalCTX_MCU=A3, .paLevelValue=0x25}, S2LPGpioPin irq_gpio=S2LP_GPIO_3, uint8_t my_addr=0x44, uint8_t multicast_addr=0xEE, uint8_t broadcast_addr=0xFF);
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:54:23: error: 'PC13' was not declared in this scope
 const int buttonPin = PC13; // set buttonPin to digital pin PC13 */
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:47:20: error: 'A2' was not declared in this scope
 #define PA_CPS_PIN A2
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:79:28: note: in expansion of macro 'PA_CPS_PIN'
   paInfo.paSignalCPS_MCU = PA_CPS_PIN;
                            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:25: error: 'D11' was not declared in this scope
   devSPI = new SPIClass(D11, D12, D3);
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:97:30: error: 'D12' was not declared in this scope
   devSPI = new SPIClass(D11, D12, D3);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/STM32duino_X-NUCLEO-S2915A1/examples/X_NUCLEO_S2915A1_HelloWorld/X_NUCLEO_S2915A1_HelloWorld.ino:115:29: error: 'A1' was not declared in this scope
   myS2LP = new S2LP(devSPI, A1, D7, A5, s_frequency, s_RfXtalFrequency, paInfo);
                             ^