Serial Controlled Motor Driver - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Serial Controlled Motor Driver

Version: 1.0.4
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Run-timeDiagnostics	TwoMasterMotorTest	TwoMotorRobot	DriverChainWithBridging	MotorTest	RegisterRWTool
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/DriverChainWithBridging

Result: PASS

Sketch uses 5482 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 586 bytes (28%) of dynamic memory, leaving 1462 bytes for local variables. Maximum is 2048 bytes.

examples/MotorTest

Result: PASS

Sketch uses 5008 bytes (15%) of program storage space. Maximum is 32256 bytes.
Global variables use 534 bytes (26%) of dynamic memory, leaving 1514 bytes for local variables. Maximum is 2048 bytes.

examples/RegisterRWTool

Result: PASS

Sketch uses 5992 bytes (18%) of program storage space. Maximum is 32256 bytes.
Global variables use 697 bytes (34%) of dynamic memory, leaving 1351 bytes for local variables. Maximum is 2048 bytes.

examples/Run-timeDiagnostics

Result: PASS

Sketch uses 9100 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 1335 bytes (65%) of dynamic memory, leaving 713 bytes for local variables. Maximum is 2048 bytes.

examples/TwoMasterMotorTest

Result: PASS

Sketch uses 5666 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 617 bytes (30%) of dynamic memory, leaving 1431 bytes for local variables. Maximum is 2048 bytes.

examples/TwoMotorRobot

Result: PASS

Sketch uses 5290 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 502 bytes (24%) of dynamic memory, leaving 1546 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp: In member function 'uint8_t SCMD::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV32);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:23: error: 'SPI_CLOCK_DIV32' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV32);
                       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:108:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:111:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~

examples/DriverChainWithBridging

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp: In member function 'uint8_t SCMD::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV32);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:23: error: 'SPI_CLOCK_DIV32' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV32);
                       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:108:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:111:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~

examples/MotorTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp: In member function 'uint8_t SCMD::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV32);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:23: error: 'SPI_CLOCK_DIV32' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV32);
                       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:108:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:111:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~

examples/RegisterRWTool

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp: In member function 'uint8_t SCMD::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV32);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:23: error: 'SPI_CLOCK_DIV32' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV32);
                       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:108:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:111:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~

examples/Run-timeDiagnostics

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp: In member function 'uint8_t SCMD::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV32);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:23: error: 'SPI_CLOCK_DIV32' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV32);
                       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:108:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:111:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~

examples/TwoMasterMotorTest

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp: In member function 'uint8_t SCMD::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV32);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:23: error: 'SPI_CLOCK_DIV32' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV32);
                       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:108:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:111:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~

examples/TwoMotorRobot

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp: In member function 'uint8_t SCMD::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV32);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:106:23: error: 'SPI_CLOCK_DIV32' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV32);
                       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:108:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:111:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE0);
       ^~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:48:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t SCMD::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/DriverChainWithBridging

Result: PASS

Sketch uses 8593 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 573 bytes (9%) of dynamic memory, leaving 5571 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:48:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t SCMD::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/MotorTest

Result: PASS

Sketch uses 8252 bytes (16%) of program storage space. Maximum is 49152 bytes.
Global variables use 573 bytes (9%) of dynamic memory, leaving 5571 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:48:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t SCMD::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/RegisterRWTool

Result: PASS

Sketch uses 9115 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 598 bytes (9%) of dynamic memory, leaving 5546 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:48:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t SCMD::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Run-timeDiagnostics

Result: PASS

Sketch uses 12196 bytes (24%) of program storage space. Maximum is 49152 bytes.
Global variables use 586 bytes (9%) of dynamic memory, leaving 5558 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:48:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t SCMD::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/TwoMasterMotorTest

Result: PASS

Sketch uses 8917 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 580 bytes (9%) of dynamic memory, leaving 5564 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:48:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t SCMD::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/TwoMotorRobot

Result: PASS

Sketch uses 8401 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 573 bytes (9%) of dynamic memory, leaving 5571 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Serial_Controlled_Motor_Driver/src/SCMD.cpp:48:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t SCMD::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 14780 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3656 bytes (11%) of dynamic memory, leaving 29112 bytes for local variables. Maximum is 32768 bytes.

examples/DriverChainWithBridging

Result: PASS

Sketch uses 16860 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3664 bytes (11%) of dynamic memory, leaving 29104 bytes for local variables. Maximum is 32768 bytes.

examples/MotorTest

Result: PASS

Sketch uses 16460 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3664 bytes (11%) of dynamic memory, leaving 29104 bytes for local variables. Maximum is 32768 bytes.

examples/RegisterRWTool

Result: PASS

Sketch uses 17208 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3692 bytes (11%) of dynamic memory, leaving 29076 bytes for local variables. Maximum is 32768 bytes.

examples/Run-timeDiagnostics

Result: PASS

Sketch uses 26956 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3676 bytes (11%) of dynamic memory, leaving 29092 bytes for local variables. Maximum is 32768 bytes.

examples/TwoMasterMotorTest

Result: PASS

Sketch uses 17000 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3668 bytes (11%) of dynamic memory, leaving 29100 bytes for local variables. Maximum is 32768 bytes.

examples/TwoMotorRobot

Result: PASS

Sketch uses 16704 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3664 bytes (11%) of dynamic memory, leaving 29104 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 203386 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13912 bytes (4%) of dynamic memory, leaving 313768 bytes for local variables. Maximum is 327680 bytes.

examples/DriverChainWithBridging

Result: PASS

Sketch uses 217090 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14216 bytes (4%) of dynamic memory, leaving 313464 bytes for local variables. Maximum is 327680 bytes.

examples/MotorTest

Result: PASS

Sketch uses 216778 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14216 bytes (4%) of dynamic memory, leaving 313464 bytes for local variables. Maximum is 327680 bytes.

examples/RegisterRWTool

Result: PASS

Sketch uses 217466 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14240 bytes (4%) of dynamic memory, leaving 313440 bytes for local variables. Maximum is 327680 bytes.

examples/Run-timeDiagnostics

Result: PASS

Sketch uses 219662 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14232 bytes (4%) of dynamic memory, leaving 313448 bytes for local variables. Maximum is 327680 bytes.

examples/TwoMasterMotorTest

Result: PASS

Sketch uses 217238 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14240 bytes (4%) of dynamic memory, leaving 313440 bytes for local variables. Maximum is 327680 bytes.

examples/TwoMotorRobot

Result: PASS

Sketch uses 216998 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14216 bytes (4%) of dynamic memory, leaving 313464 bytes for local variables. Maximum is 327680 bytes.