SevSegShift - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

SevSegShift

Version: 3.6.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	SevSegShiftOne_Counter	SevSegShift_Counter	SevSeg_Counter	stringWithPeriod	testWholeDisplay
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 466 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/SevSegShiftOne_Counter

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: error: 'sevseg' was not declared in this scope
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: note: suggested alternative: 'SevSeg'
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^~~~~~
   SevSeg
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: error: 'sevseg' was not declared in this scope
     sevseg.setNumber(deciSeconds, 1);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: note: suggested alternative: 'SevSeg'
     sevseg.setNumber(deciSeconds, 1);
     ^~~~~~
     SevSeg
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: error: 'sevseg' was not declared in this scope
   sevseg.refreshDisplay(); // Must run repeatedly
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: note: suggested alternative: 'SevSeg'
   sevseg.refreshDisplay(); // Must run repeatedly
   ^~~~~~
   SevSeg

examples/SevSegShift_Counter

Result: PASS

Sketch uses 4020 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 195 bytes (9%) of dynamic memory, leaving 1853 bytes for local variables. Maximum is 2048 bytes.

examples/SevSeg_Counter

Result: PASS

Sketch uses 2680 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 160 bytes (7%) of dynamic memory, leaving 1888 bytes for local variables. Maximum is 2048 bytes.

examples/stringWithPeriod

Result: PASS

Sketch uses 2556 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 281 bytes (13%) of dynamic memory, leaving 1767 bytes for local variables. Maximum is 2048 bytes.

examples/testWholeDisplay

Result: PASS

Sketch uses 2522 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 147 bytes (7%) of dynamic memory, leaving 1901 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/SevSegShiftOne_Counter

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: error: 'sevseg' was not declared in this scope
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: note: suggested alternative: 'SevSeg'
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^~~~~~
   SevSeg
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: error: 'sevseg' was not declared in this scope
     sevseg.setNumber(deciSeconds, 1);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: note: suggested alternative: 'SevSeg'
     sevseg.setNumber(deciSeconds, 1);
     ^~~~~~
     SevSeg
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: error: 'sevseg' was not declared in this scope
   sevseg.refreshDisplay(); // Must run repeatedly
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: note: suggested alternative: 'SevSeg'
   sevseg.refreshDisplay(); // Must run repeatedly
   ^~~~~~
   SevSeg

examples/SevSegShift_Counter

Result: PASS

Sketch uses 81086 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43532 bytes (16%) of dynamic memory, leaving 226804 bytes for local variables. Maximum is 270336 bytes.

examples/SevSeg_Counter

Result: PASS

Sketch uses 80444 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43508 bytes (16%) of dynamic memory, leaving 226828 bytes for local variables. Maximum is 270336 bytes.

examples/stringWithPeriod

Result: PASS

Sketch uses 80526 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43596 bytes (16%) of dynamic memory, leaving 226740 bytes for local variables. Maximum is 270336 bytes.

examples/testWholeDisplay

Result: PASS

Sketch uses 80380 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43496 bytes (16%) of dynamic memory, leaving 226840 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/SevSegShiftOne_Counter

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: error: 'sevseg' was not declared in this scope
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: note: suggested alternative: 'SevSeg'
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^~~~~~
   SevSeg
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: error: 'sevseg' was not declared in this scope
     sevseg.setNumber(deciSeconds, 1);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: note: suggested alternative: 'SevSeg'
     sevseg.setNumber(deciSeconds, 1);
     ^~~~~~
     SevSeg
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: error: 'sevseg' was not declared in this scope
   sevseg.refreshDisplay(); // Must run repeatedly
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: note: suggested alternative: 'SevSeg'
   sevseg.refreshDisplay(); // Must run repeatedly
   ^~~~~~
   SevSeg

examples/SevSegShift_Counter

Result: PASS

Sketch uses 4465 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 102 bytes (1%) of dynamic memory, leaving 6042 bytes for local variables. Maximum is 6144 bytes.

examples/SevSeg_Counter

Result: PASS

Sketch uses 3103 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 79 bytes (1%) of dynamic memory, leaving 6065 bytes for local variables. Maximum is 6144 bytes.

examples/stringWithPeriod

Result: PASS

Sketch uses 3026 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 166 bytes (2%) of dynamic memory, leaving 5978 bytes for local variables. Maximum is 6144 bytes.

examples/testWholeDisplay

Result: PASS

Sketch uses 2943 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 66 bytes (1%) of dynamic memory, leaving 6078 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/SevSegShiftOne_Counter

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: error: 'sevseg' was not declared in this scope
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: note: suggested alternative: 'SevSeg'
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^~~~~~
   SevSeg
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: error: 'sevseg' was not declared in this scope
     sevseg.setNumber(deciSeconds, 1);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: note: suggested alternative: 'SevSeg'
     sevseg.setNumber(deciSeconds, 1);
     ^~~~~~
     SevSeg
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: error: 'sevseg' was not declared in this scope
   sevseg.refreshDisplay(); // Must run repeatedly
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: note: suggested alternative: 'SevSeg'
   sevseg.refreshDisplay(); // Must run repeatedly
   ^~~~~~
   SevSeg

examples/SevSegShift_Counter

Result: PASS

Sketch uses 14784 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3080 bytes (9%) of dynamic memory, leaving 29688 bytes for local variables. Maximum is 32768 bytes.

examples/SevSeg_Counter

Result: PASS

Sketch uses 14092 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3056 bytes (9%) of dynamic memory, leaving 29712 bytes for local variables. Maximum is 32768 bytes.

examples/stringWithPeriod

Result: PASS

Sketch uses 14188 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3148 bytes (9%) of dynamic memory, leaving 29620 bytes for local variables. Maximum is 32768 bytes.

examples/testWholeDisplay

Result: PASS

Sketch uses 14032 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3048 bytes (9%) of dynamic memory, leaving 29720 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198482 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13104 bytes (3%) of dynamic memory, leaving 314576 bytes for local variables. Maximum is 327680 bytes.

examples/SevSegShiftOne_Counter

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:44:3: error: 'sevseg' was not declared in this scope
   sevseg.begin(hardwareConfig, numDigits, digitPins, segmentPins, resistorsOnSegments,
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:60:5: error: 'sevseg' was not declared in this scope
     sevseg.setNumber(deciSeconds, 1);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevSegShift/examples/SevSegShiftOne_Counter/SevSegShiftOne_Counter.ino:63:3: error: 'sevseg' was not declared in this scope
   sevseg.refreshDisplay(); // Must run repeatedly
   ^

examples/SevSegShift_Counter

Result: PASS

Sketch uses 204206 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13384 bytes (4%) of dynamic memory, leaving 314296 bytes for local variables. Maximum is 327680 bytes.

examples/SevSeg_Counter

Result: PASS

Sketch uses 201970 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13352 bytes (4%) of dynamic memory, leaving 314328 bytes for local variables. Maximum is 327680 bytes.

examples/stringWithPeriod

Result: PASS

Sketch uses 200782 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13408 bytes (4%) of dynamic memory, leaving 314272 bytes for local variables. Maximum is 327680 bytes.

examples/testWholeDisplay

Result: PASS

Sketch uses 200626 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13312 bytes (4%) of dynamic memory, leaving 314368 bytes for local variables. Maximum is 327680 bytes.