SevenSeg4D - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

SevenSeg4D

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Counter	CounterSPI	FloatNumSPI	ScrollMsgSPI
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	PASS	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/Counter

Result: PASS

Sketch uses 3116 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 198 bytes (9%) of dynamic memory, leaving 1850 bytes for local variables. Maximum is 2048 bytes.

examples/CounterSPI

Result: PASS

Sketch uses 3196 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 199 bytes (9%) of dynamic memory, leaving 1849 bytes for local variables. Maximum is 2048 bytes.

examples/FloatNumSPI

Result: PASS

Sketch uses 3794 bytes (11%) of program storage space. Maximum is 32256 bytes.
Global variables use 193 bytes (9%) of dynamic memory, leaving 1855 bytes for local variables. Maximum is 2048 bytes.

examples/ScrollMsgSPI

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:24:1: error: expected unqualified-id before '/' token
 / Initiates class with only one PIN (ST_CP or latch)
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: error: 'disp' was not declared in this scope
   disp.scrollMsg(buf, sdir, 250);
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: note: suggested alternative: 'div'
   disp.scrollMsg(buf, sdir, 250);
   ^~~~
   div

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 80722 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43616 bytes (16%) of dynamic memory, leaving 226720 bytes for local variables. Maximum is 270336 bytes.

examples/Counter

Result: FAIL

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/SevenSeg4D.cpp: In member function 'void SevenSeg4D::initSPI(int, CommonLedConnection)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/SevenSeg4D.cpp:83:9: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
     SPI.setBitOrder(MSBFIRST);
         ^~~~~~~~~~~

examples/CounterSPI

Result: FAIL

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/SevenSeg4D.cpp: In member function 'void SevenSeg4D::initSPI(int, CommonLedConnection)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/SevenSeg4D.cpp:83:9: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
     SPI.setBitOrder(MSBFIRST);
         ^~~~~~~~~~~

examples/FloatNumSPI

Result: FAIL

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino:35:5: error: 'dtostrf' was not declared in this scope
     dtostrf(counter * 0.001f, 4, 3, buf);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino:35:5: note: suggested alternative: 'strstr'
     dtostrf(counter * 0.001f, 4, 3, buf);
     ^~~~~~~
     strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino:56:7: error: 'dtostrf' was not declared in this scope
       dtostrf(counter * 0.001f, 4, 3, buf);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino:56:7: note: suggested alternative: 'strstr'
       dtostrf(counter * 0.001f, 4, 3, buf);
       ^~~~~~~
       strstr

examples/ScrollMsgSPI

Result: FAIL

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:17:22: error: initializer-string for array of chars is too long [-fpermissive]
 const char buf[18] = "   Hello World!!!\0";
                      ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:24:1: error: expected unqualified-id before '/' token
 / Initiates class with only one PIN (ST_CP or latch)
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: error: 'disp' was not declared in this scope
   disp.scrollMsg(buf, sdir, 250);
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: note: suggested alternative: 'div'
   disp.scrollMsg(buf, sdir, 250);
   ^~~~
   div

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3246 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 40 bytes (0%) of dynamic memory, leaving 6104 bytes for local variables. Maximum is 6144 bytes.

examples/Counter

Result: PASS

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5873 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 127 bytes (2%) of dynamic memory, leaving 6017 bytes for local variables. Maximum is 6144 bytes.

examples/CounterSPI

Result: PASS

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5861 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 127 bytes (2%) of dynamic memory, leaving 6017 bytes for local variables. Maximum is 6144 bytes.

examples/FloatNumSPI

Result: PASS

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 6460 bytes (13%) of program storage space. Maximum is 49152 bytes.
Global variables use 127 bytes (2%) of dynamic memory, leaving 6017 bytes for local variables. Maximum is 6144 bytes.

examples/ScrollMsgSPI

Result: FAIL

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:24:1: error: expected unqualified-id before '/' token
 / Initiates class with only one PIN (ST_CP or latch)
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: error: 'disp' was not declared in this scope
   disp.scrollMsg(buf, sdir, 250);
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: note: suggested alternative: 'div'
   disp.scrollMsg(buf, sdir, 250);
   ^~~~
   div

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13336 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3068 bytes (9%) of dynamic memory, leaving 29700 bytes for local variables. Maximum is 32768 bytes.

examples/Counter

Result: PASS

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 15808 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3116 bytes (9%) of dynamic memory, leaving 29652 bytes for local variables. Maximum is 32768 bytes.

examples/CounterSPI

Result: PASS

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 15848 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3116 bytes (9%) of dynamic memory, leaving 29652 bytes for local variables. Maximum is 32768 bytes.

examples/FloatNumSPI

Result: FAIL

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino:35:5: error: 'dtostrf' was not declared in this scope
     dtostrf(counter * 0.001f, 4, 3, buf);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino:35:5: note: suggested alternative: 'strstr'
     dtostrf(counter * 0.001f, 4, 3, buf);
     ^~~~~~~
     strstr
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino:56:7: error: 'dtostrf' was not declared in this scope
       dtostrf(counter * 0.001f, 4, 3, buf);
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/FloatNumSPI/FloatNumSPI.ino:56:7: note: suggested alternative: 'strstr'
       dtostrf(counter * 0.001f, 4, 3, buf);
       ^~~~~~~
       strstr

examples/ScrollMsgSPI

Result: FAIL

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:17:22: error: initializer-string for array of chars is too long [-fpermissive]
 const char buf[18] = "   Hello World!!!\0";
                      ^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:24:1: error: expected unqualified-id before '/' token
 / Initiates class with only one PIN (ST_CP or latch)
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: error: 'disp' was not declared in this scope
   disp.scrollMsg(buf, sdir, 250);
   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: note: suggested alternative: 'div'
   disp.scrollMsg(buf, sdir, 250);
   ^~~~
   div

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198540 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13104 bytes (3%) of dynamic memory, leaving 314576 bytes for local variables. Maximum is 327680 bytes.

examples/Counter

Result: PASS

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 200818 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13320 bytes (4%) of dynamic memory, leaving 314360 bytes for local variables. Maximum is 327680 bytes.

examples/CounterSPI

Result: PASS

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 202562 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13368 bytes (4%) of dynamic memory, leaving 314312 bytes for local variables. Maximum is 327680 bytes.

examples/FloatNumSPI

Result: PASS

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 202914 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13368 bytes (4%) of dynamic memory, leaving 314312 bytes for local variables. Maximum is 327680 bytes.

examples/ScrollMsgSPI

Result: FAIL

WARNING: library SevenSeg4D claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:17:22: error: initializer-string for array of chars is too long [-fpermissive]
 const char buf[18] = "   Hello World!!!\0";
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:24:1: error: expected unqualified-id before '/' token
 / Initiates class with only one PIN (ST_CP or latch)
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SevenSeg4D/examples/ScrollMsgSPI/ScrollMsgSPI.ino:37:3: error: 'disp' was not declared in this scope
   disp.scrollMsg(buf, sdir, 250);
   ^