This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 2.9.16
More details
| Board | Claims compatibility | Inclusion | MotionSensor |
Speaker |
TV |
temperaturesensor |
Fan |
Lock |
Relay |
Switch |
Thermostat |
ACUnit |
AirQualitySensor |
Camera |
ContactSensor |
DimSwitch |
PowerSensor |
Blinds |
GarageDoor |
Light |
doorbell |
platformio |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | PASS | FAIL | FAIL | PASS | FAIL | PASS | PASS | PASS | FAIL | PASS | FAIL |
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /tmp/arduino-testlib2050289903/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Camera/Camera.ino:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi/src/WebServer.h:27:10: fatal error: functional: No such file or directory
#include <functional>
^~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:29:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:29:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Result: FAIL
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:33:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:24:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:33:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
Result: FAIL
Result: PASS
Sketch uses 99470 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44372 bytes (16%) of dynamic memory, leaving 225964 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:46:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s turned %s\r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onTargetTemperature(const arduino::String&, float&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:52:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s set temperature to %f\r\n", deviceId.c_str(), temperature);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onAdjustTargetTemperature(const arduino::String&, float&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:59:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s changed temperature about %f to %f", deviceId.c_str(), temperatureDelta, globalTemperature);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onThermostatMode(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:65:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s set to mode %s\r\n", deviceId.c_str(), mode.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:70:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan speed set to %d\r\n", rangeValue);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onAdjustRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:77:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan speed changed about %d to %d\r\n", valueDelta, globalFanSpeed);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:83:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:84:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:86:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:86:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:87:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:91:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:104:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:105:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:110:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:45:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power turned %s \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'bool onRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:51:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s set position to %d\r\n", deviceId.c_str(), position);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'bool onAdjustRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:57:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s position changed about %i to %d\r\n", deviceId.c_str(), positionDelta, blindsPosition);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:65:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:66:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:68:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:68:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:69:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:73:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'void setupSinricPro()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:80:12: error: 'class SinricProBlinds' has no member named 'onRangeValue'
myBlinds.onRangeValue(onRangeValue);
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:81:12: error: 'class SinricProBlinds' has no member named 'onAdjustRangeValue'
myBlinds.onAdjustRangeValue(onAdjustRangeValue);
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:84:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:85:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:91:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Camera/Camera.ino:36:10: fatal error: SimStreamer.h: No such file or directory
#include "SimStreamer.h"
^~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In function 'void handleContactsensor()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:69:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Contactsensor is %s now\r\n", actualContactState?"open":"closed");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:87:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s turned %s (via SinricPro) \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:95:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:96:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:98:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:98:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:99:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:103:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:115:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:116:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:122:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:46:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power turned %s \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'bool onPowerLevel(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:53:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power level changed to %d\r\n", deviceId.c_str(), device_state.powerLevel);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'bool onAdjustPowerLevel(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:59:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power level changed about %i to %d\r\n", deviceId.c_str(), levelDelta, device_state.powerLevel);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:65:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:66:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:68:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:68:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:69:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:73:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:85:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:86:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:92:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:47:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan turned %s\r\n", state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'bool onRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:55:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan speed changed to %d\r\n", device_state.fanSpeed);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'bool onAdjustRangeValue(const arduino::String&, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:62:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan speed changed about %i to %d\r\n", rangeValueDelta, device_state.fanSpeed);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:69:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:70:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:72:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:72:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:73:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:76:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:88:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:89:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:95:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In function 'bool onDoorState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:43:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Garagedoor is %s now.\r\n", doorState?"closed":"open");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:48:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:49:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:51:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:51:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:52:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:56:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:64:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:65:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:70:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Result: FAIL
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In function 'void handleMotionsensor()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:70:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Motion %s\r\n", actualMotionState?"detected":"not detected");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:88:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s turned %s (via SinricPro) \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:96:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:97:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:99:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:99:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:100:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:104:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:116:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:117:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:123:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:67:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power turned %s \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:92:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:93:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:95:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:95:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:96:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:100:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:111:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:112:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:55:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Speaker turned %s\r\n", state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onSetVolume(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:61:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Volume set to: %i\r\n", volume);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onAdjustVolume(const arduino::String&, int&, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:68:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Volume changed about %i to %i\r\n", volumeDelta, speakerState.volume);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onMute(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:74:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Speaker is %s\r\n", mute?"muted":"unmuted");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onMediaControl(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:80:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("MediaControl: %s\r\n", control.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onSelectInput(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:93:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Input changed to %s\r\n", input.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onSetMode(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:98:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Speaker mode set to %s\r\n", mode.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onSetBands(const arduino::String&, const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:108:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s bands %s set to %d\r\n", deviceId.c_str(), bands.c_str(), level);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onAdjustBands(const arduino::String&, const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:125:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s bands \"%s\" adjusted about %i to %d\r\n", deviceId.c_str(), bands.c_str(), levelDelta, speakerState.bands[index]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onResetBands(const arduino::String&, const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:137:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s bands \"%s\" reset to%d\r\n", deviceId.c_str(), bands.c_str(), speakerState.bands[index]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:144:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:145:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:147:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:147:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:148:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:152:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:173:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:174:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:180:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onAdjustVolume(const arduino::String&, int&, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:74:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Volume changed about %i to %i\r\n", volumeDelta, tvVolume);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onChangeChannel(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:81:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Change channel to \"%s\" (channel number %d)\r\n", channel.c_str(), tvChannel);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onChangeChannelNumber(const arduino::String&, int, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:92:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Change to channel to %d (channel name \"%s\")\r\n", tvChannel, channelName.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onMediaControl(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:97:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("MediaControl: %s\r\n", control.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onMute(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:110:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("TV volume is %s\r\n", mute?"muted":"unmuted");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:116:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("TV turned %s\r\n", state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onSelectInput(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:122:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Input changed to %s\r\n", input.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onSetVolume(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:127:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Volume set to: %i\r\n", volume);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onSkipChannels(const arduino::String&, int, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:138:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Skip channel: %i (number: %i / name: \"%s\")\r\n", channelCount, tvChannel, channelName.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:145:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:146:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:148:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:148:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:149:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:153:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:173:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:174:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:180:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:181:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d channels configured\r\n", MAX_CHANNELS);
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:45:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s turned %s\r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'bool onTargetTemperature(const arduino::String&, float&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:51:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s set temperature to %f\r\n", deviceId.c_str(), temperature);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'bool onAdjustTargetTemperature(const arduino::String&, float&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:58:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s changed temperature about %f to %f", deviceId.c_str(), temperatureDelta, globalTemperature);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'bool onThermostatMode(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:64:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s set to mode %s\r\n", deviceId.c_str(), mode.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:70:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:71:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:73:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:73:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:74:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:78:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:89:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:90:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:95:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In function 'void checkButtonPress()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:57:14: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("Ding dong...\r\n");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:71:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:72:3: error: 'WiFi' was not declared in this scope
WiFi.begin(WIFI_SSID, WIFI_PASS);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:74:27: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:74:27: note: suggested alternative: 'WSC_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
WSC_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:75:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:79:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:87:38: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:88:41: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:96:35: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Multiple libraries were found for "Ethernet.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Ethernet
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EthernetENC
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UIPEthernet
Result: FAIL
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /tmp/arduino-testlib2771506032/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Camera/Camera.ino:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi/src/WebServer.h:27:10: fatal error: functional: No such file or directory
#include <functional>
^~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:29:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:29:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Result: FAIL
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:33:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:24:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:31:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProInterface.h:37:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricPro.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:33:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic/src/SinricProQueue.h:37:10: fatal error: queue: No such file or directory
#include <queue>
^~~~~~~
compilation terminated.
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Result: FAIL
Result: FAIL
Result: PASS
Sketch uses 34820 bytes (13%) of program storage space. Maximum is 262144 bytes. Global variables use 6284 bytes (19%) of dynamic memory, leaving 26484 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:46:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s turned %s\r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onTargetTemperature(const arduino::String&, float&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:52:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s set temperature to %f\r\n", deviceId.c_str(), temperature);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onAdjustTargetTemperature(const arduino::String&, float&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:59:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s changed temperature about %f to %f", deviceId.c_str(), temperatureDelta, globalTemperature);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onThermostatMode(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:65:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s set to mode %s\r\n", deviceId.c_str(), mode.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:70:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan speed set to %d\r\n", rangeValue);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'bool onAdjustRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:77:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan speed changed about %d to %d\r\n", valueDelta, globalFanSpeed);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:83:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:87:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:91:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:104:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:105:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ACUnit/ACUnit.ino:110:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:45:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power turned %s \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'bool onRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:51:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s set position to %d\r\n", deviceId.c_str(), position);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'bool onAdjustRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:57:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s position changed about %i to %d\r\n", deviceId.c_str(), positionDelta, blindsPosition);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:65:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:69:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:73:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'void setupSinricPro()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:80:12: error: 'class SinricProBlinds' has no member named 'onRangeValue'
myBlinds.onRangeValue(onRangeValue);
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:81:12: error: 'class SinricProBlinds' has no member named 'onAdjustRangeValue'
myBlinds.onAdjustRangeValue(onAdjustRangeValue);
^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:84:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:85:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Blinds/Blinds.ino:91:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Camera/Camera.ino:36:10: fatal error: SimStreamer.h: No such file or directory
#include "SimStreamer.h"
^~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In function 'void handleContactsensor()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:69:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Contactsensor is %s now\r\n", actualContactState?"open":"closed");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:87:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s turned %s (via SinricPro) \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:95:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:99:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:103:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:115:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:116:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/ContactSensor/ContactSensor.ino:122:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:46:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power turned %s \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'bool onPowerLevel(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:53:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power level changed to %d\r\n", deviceId.c_str(), device_state.powerLevel);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'bool onAdjustPowerLevel(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:59:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power level changed about %i to %d\r\n", deviceId.c_str(), levelDelta, device_state.powerLevel);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:65:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:69:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:73:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:85:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:86:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:92:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:47:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan turned %s\r\n", state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'bool onRangeValue(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:55:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan speed changed to %d\r\n", device_state.fanSpeed);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'bool onAdjustRangeValue(const arduino::String&, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:62:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Fan speed changed about %i to %d\r\n", rangeValueDelta, device_state.fanSpeed);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:69:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:73:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:76:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:76:78: error: request for member 'toString' in 'WiFi.WiFiClass::localIP()', which is of non-class type 'uint32_t {aka long unsigned int}'
Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:88:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:89:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:95:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In function 'bool onDoorState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:43:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Garagedoor is %s now.\r\n", doorState?"closed":"open");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:48:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:52:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:56:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:64:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:65:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/GarageDoor/GarageDoor.ino:70:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In function 'void handleMotionsensor()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:70:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Motion %s\r\n", actualMotionState?"detected":"not detected");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:88:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s turned %s (via SinricPro) \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:96:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:100:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:104:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:116:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:117:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/MotionSensor/MotionSensor.ino:123:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:67:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s power turned %s \r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:92:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:96:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:100:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:100:78: error: request for member 'toString' in 'WiFi.WiFiClass::localIP()', which is of non-class type 'uint32_t {aka long unsigned int}'
Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:111:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/PowerSensor/PowerSensor.ino:112:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:55:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Speaker turned %s\r\n", state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onSetVolume(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:61:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Volume set to: %i\r\n", volume);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onAdjustVolume(const arduino::String&, int&, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:68:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Volume changed about %i to %i\r\n", volumeDelta, speakerState.volume);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onMute(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:74:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Speaker is %s\r\n", mute?"muted":"unmuted");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onMediaControl(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:80:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("MediaControl: %s\r\n", control.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onSelectInput(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:93:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Input changed to %s\r\n", input.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onSetMode(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:98:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Speaker mode set to %s\r\n", mode.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onSetBands(const arduino::String&, const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:108:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s bands %s set to %d\r\n", deviceId.c_str(), bands.c_str(), level);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onAdjustBands(const arduino::String&, const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:125:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s bands \"%s\" adjusted about %i to %d\r\n", deviceId.c_str(), bands.c_str(), levelDelta, speakerState.bands[index]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'bool onResetBands(const arduino::String&, const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:137:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Device %s bands \"%s\" reset to%d\r\n", deviceId.c_str(), bands.c_str(), speakerState.bands[index]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:144:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:148:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:152:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:173:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:174:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Speaker/Speaker.ino:180:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onAdjustVolume(const arduino::String&, int&, bool)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:74:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Volume changed about %i to %i\r\n", volumeDelta, tvVolume);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onChangeChannel(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:81:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Change channel to \"%s\" (channel number %d)\r\n", channel.c_str(), tvChannel);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onChangeChannelNumber(const arduino::String&, int, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:92:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Change to channel to %d (channel name \"%s\")\r\n", tvChannel, channelName.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onMediaControl(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:97:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("MediaControl: %s\r\n", control.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onMute(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:110:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("TV volume is %s\r\n", mute?"muted":"unmuted");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:116:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("TV turned %s\r\n", state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onSelectInput(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:122:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Input changed to %s\r\n", input.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onSetVolume(const arduino::String&, int&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:127:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Volume set to: %i\r\n", volume);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'bool onSkipChannels(const arduino::String&, int, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:138:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Skip channel: %i (number: %i / name: \"%s\")\r\n", channelCount, tvChannel, channelName.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:145:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:149:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:153:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:173:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:174:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:180:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/TV/TV.ino:181:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%d channels configured\r\n", MAX_CHANNELS);
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'bool onPowerState(const arduino::String&, bool&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:45:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s turned %s\r\n", deviceId.c_str(), state?"on":"off");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'bool onTargetTemperature(const arduino::String&, float&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:51:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s set temperature to %f\r\n", deviceId.c_str(), temperature);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'bool onAdjustTargetTemperature(const arduino::String&, float&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:58:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s changed temperature about %f to %f", deviceId.c_str(), temperatureDelta, globalTemperature);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'bool onThermostatMode(const arduino::String&, arduino::String&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:64:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Thermostat %s set to mode %s\r\n", deviceId.c_str(), mode.c_str());
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:70:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:74:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:78:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:89:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:90:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Thermostat/Thermostat.ino:95:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In function 'void checkButtonPress()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:57:14: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("Ding dong...\r\n");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In function 'void setupWiFi()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:71:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("\r\n[Wifi]: Connecting");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:75:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf(".");
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:79:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("connected!\r\n[WiFi]: IP-Address is %d.%d.%d.%d\r\n", localIP[0], localIP[1], localIP[2], localIP[3]);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:87:38: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In lambda function:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:88:41: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/doorbell/doorbell.ino:96:35: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
^~~~~~
print
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Result: FAIL
Result: FAIL
Result: PASS
Sketch uses 362686 bytes (27%) of program storage space. Maximum is 1310720 bytes. Global variables use 17744 bytes (5%) of dynamic memory, leaving 309936 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 911554 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39876 bytes (12%) of dynamic memory, leaving 287804 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
Result: PASS
Sketch uses 909622 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39852 bytes (12%) of dynamic memory, leaving 287828 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Camera/Camera.ino:36:25: fatal error: SimStreamer.h: No such file or directory compilation terminated. Multiple libraries were found for "WiFiClientSecure.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFiClientSecure Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi Multiple libraries were found for "WiFi.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFi Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi Multiple libraries were found for "WebServer.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WebServer Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi Multiple libraries were found for "SinricPro.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic Multiple libraries were found for "ArduinoJson.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Result: PASS
Sketch uses 907770 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39868 bytes (12%) of dynamic memory, leaving 287812 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/DimSwitch/DimSwitch.ino:30:0: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/src/SinricProDimSwitch.h:12:47: fatal error: Capabilities/PowerstateController.h: No such file or directory compilation terminated. Multiple libraries were found for "WiFi.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFi Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi Multiple libraries were found for "SinricPro.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic Multiple libraries were found for "ArduinoJson.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino Multiple libraries were found for "WiFiClientSecure.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFiClientSecure Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino: In function 'void setupSinricPro()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:85:46: error: invalid conversion from 'bool (*)(const String&, int)' to 'SINRICPRO_2_9_16::AdjustRangeValueCallback {aka bool (*)(const String&, int&)}' [-fpermissive]
myFan.onAdjustRangeValue(onAdjustRangeValue);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/src/SinricProFanUS.h:13:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/examples/Fan/Fan.ino:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro/src/Capabilities/RangeController.h:180:6: note: initializing argument 1 of 'void SINRICPRO_2_9_16::RangeController<T>::onAdjustRangeValue(SINRICPRO_2_9_16::AdjustRangeValueCallback) [with T = SINRICPRO_2_9_16::SinricProFanUS; SINRICPRO_2_9_16::AdjustRangeValueCallback = bool (*)(const String&, int&)]'
void RangeController<T>::onAdjustRangeValue(AdjustRangeValueCallback cb) {
^
Multiple libraries were found for "WiFiClientSecure.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFiClientSecure
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Multiple libraries were found for "SinricPro.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SinricPro_Generic
Multiple libraries were found for "ArduinoJson.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArduinoJson
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/BaleMessengerBot_Arduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_HTTP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingESP
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CMMC_MQTT_Connector
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/CoogleIOT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Antares_ESP8266_MQTT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ThingsIoT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AllThingsTalk_LTE-M_SDK
Result: PASS
Sketch uses 906678 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39828 bytes (12%) of dynamic memory, leaving 287852 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
Result: FAIL
Result: PASS
Sketch uses 907754 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39868 bytes (12%) of dynamic memory, leaving 287812 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 908398 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39908 bytes (12%) of dynamic memory, leaving 287772 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
Result: PASS
Sketch uses 916398 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39940 bytes (12%) of dynamic memory, leaving 287740 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
Result: PASS
Sketch uses 914854 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39980 bytes (12%) of dynamic memory, leaving 287700 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 908878 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39852 bytes (12%) of dynamic memory, leaving 287828 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 907338 bytes (69%) of program storage space. Maximum is 1310720 bytes. Global variables use 39852 bytes (12%) of dynamic memory, leaving 287828 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
Result: FAIL