SmartEverything LPS25H - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

SmartEverything LPS25H

Version: 1.1.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Pressure
arduino:avr:uno 1.8.4	Yes	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/src/Pressure/LPS25H.cpp:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'byte LPS25H::readRegister(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int, int);
             ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t, uint8_t);
             ^~~~~~~~~~~

examples/Pressure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: error: 'PIN_LED_13' was not declared in this scope
     pinMode(PIN_LED_13, OUTPUT);
             ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: note: suggested alternative: 'PIN_A3'
     pinMode(PIN_LED_13, OUTPUT);
             ^~~~~~~~~~
             PIN_A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:24:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.begin(115200);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:24:5: note: suggested alternative: 'Serial'
     SerialUSB.begin(115200);
     ^~~~~~~~~
     Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:33:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.print("Pressure   : ");
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:33:5: note: suggested alternative: 'Serial'
     SerialUSB.print("Pressure   : ");
     ^~~~~~~~~
     Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: error: 'PIN_LED_13' was not declared in this scope
     digitalWrite(PIN_LED_13, LOW);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: note: suggested alternative: 'PIN_A3'
     digitalWrite(PIN_LED_13, LOW);
                  ^~~~~~~~~~
                  PIN_A3

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 81730 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44236 bytes (16%) of dynamic memory, leaving 226100 bytes for local variables. Maximum is 270336 bytes.

examples/Pressure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: error: 'PIN_LED_13' was not declared in this scope
     pinMode(PIN_LED_13, OUTPUT);
             ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: note: suggested alternative: 'PIN_LED'
     pinMode(PIN_LED_13, OUTPUT);
             ^~~~~~~~~~
             PIN_LED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: error: 'PIN_LED_13' was not declared in this scope
     digitalWrite(PIN_LED_13, LOW);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: note: suggested alternative: 'PIN_LED'
     digitalWrite(PIN_LED_13, LOW);
                  ^~~~~~~~~~
                  PIN_LED

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/src/Pressure/LPS25H.cpp:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'byte LPS25H::readRegister(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/Pressure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: error: 'PIN_LED_13' was not declared in this scope
     pinMode(PIN_LED_13, OUTPUT);
             ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: note: suggested alternative: 'PIN_A3'
     pinMode(PIN_LED_13, OUTPUT);
             ^~~~~~~~~~
             PIN_A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:24:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.begin(115200);
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:24:5: note: suggested alternative: 'Serial1'
     SerialUSB.begin(115200);
     ^~~~~~~~~
     Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:33:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.print("Pressure   : ");
     ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:33:5: note: suggested alternative: 'Serial1'
     SerialUSB.print("Pressure   : ");
     ^~~~~~~~~
     Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: error: 'PIN_LED_13' was not declared in this scope
     digitalWrite(PIN_LED_13, LOW);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: note: suggested alternative: 'PIN_A3'
     digitalWrite(PIN_LED_13, LOW);
                  ^~~~~~~~~~
                  PIN_A3

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 13608 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3580 bytes (10%) of dynamic memory, leaving 29188 bytes for local variables. Maximum is 32768 bytes.

examples/Pressure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: error: 'PIN_LED_13' was not declared in this scope
     pinMode(PIN_LED_13, OUTPUT);
             ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: note: suggested alternative: 'PIN_LED'
     pinMode(PIN_LED_13, OUTPUT);
             ^~~~~~~~~~
             PIN_LED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: error: 'PIN_LED_13' was not declared in this scope
     digitalWrite(PIN_LED_13, LOW);
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: note: suggested alternative: 'PIN_LED'
     digitalWrite(PIN_LED_13, LOW);
                  ^~~~~~~~~~
                  PIN_LED

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 202558 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13896 bytes (4%) of dynamic memory, leaving 313784 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/src/Pressure/LPS25H.cpp:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'byte LPS25H::readRegister(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
     uint8_t requestFrom(int address, int size);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size);
             ^

examples/Pressure

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:22:13: error: 'PIN_LED_13' was not declared in this scope
     pinMode(PIN_LED_13, OUTPUT);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:24:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.begin(115200);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:33:5: error: 'SerialUSB' was not declared in this scope
     SerialUSB.print("Pressure   : ");
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SmartEverything_LPS25H/examples/Pressure/Pressure.ino:42:18: error: 'PIN_LED_13' was not declared in this scope
     digitalWrite(PIN_LED_13, LOW);
                  ^