Sodaq_UBlox_GPS - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Sodaq_UBlox_GPS

Version: 0.9.6
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	test_ublox_gps
arduino:avr:uno 1.8.4	No ⚠️	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

WARNING: library Sodaq_UBlox_GPS claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 2376 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 175 bytes (8%) of dynamic memory, leaving 1873 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:21:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'uint8_t Sodaq_UBlox_GPS::read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:69:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int, int, int);
             ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:66:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t, uint8_t, uint8_t);
             ^~~~~~~~~~~

examples/test_ublox_gps

Result: FAIL

WARNING: library Sodaq_UBlox_GPS claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:39:13: error: 'SerialUSB' was not declared in this scope
     while (!SerialUSB) {
             ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:39:13: note: suggested alternative: 'Serial'
     while (!SerialUSB) {
             ^~~~~~~~~
             Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:45:18: error: 'LED_RED' was not declared in this scope
     digitalWrite(LED_RED, HIGH);
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:47:18: error: 'LED_GREEN' was not declared in this scope
     digitalWrite(LED_GREEN, HIGH);
                  ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:49:18: error: 'LED_BLUE' was not declared in this scope
     digitalWrite(LED_BLUE, HIGH);
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:49:18: note: suggested alternative: 'LED_BUILTIN'
     digitalWrite(LED_BLUE, HIGH);
                  ^~~~~~~~
                  LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:58:20: error: 'GPS_ENABLE' was not declared in this scope
     sodaq_gps.init(GPS_ENABLE);
                    ^~~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library Sodaq_UBlox_GPS claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp: In member function 'arduino::String Sodaq_UBlox_GPS::num2String(int, size_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:463:11: error: ambiguous overload for 'operator=' (operand types are 'arduino::String' and 'int')
     out = num;
           ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:98:11: note: candidate: arduino::String& arduino::String::operator=(const arduino::String&) <near match>
  String & operator = (const String &rhs);
           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:98:11: note:   conversion of argument 1 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:463:11: error: conversion from 'int' to 'const arduino::String' is ambiguous
     out = num;
           ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:74:2: note: candidate: arduino::String::String(const arduino::__FlashStringHelper*) <near match>
  String(const __FlashStringHelper *str);
  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:74:2: note:   conversion of argument 1 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:463:11: error: invalid conversion from 'int' to 'const arduino::__FlashStringHelper*' [-fpermissive]
     out = num;
           ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:70:2: note: candidate: arduino::String::String(const char*) <near match>
  String(const char *cstr = "");
  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:70:2: note:   conversion of argument 1 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:463:11: error: invalid conversion from 'int' to 'const char*' [-fpermissive]
     out = num;
           ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:99:11: note: candidate: arduino::String& arduino::String::operator=(const char*) <near match>
  String & operator = (const char *cstr);
           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:99:11: note:   conversion of argument 1 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:463:11: error: invalid conversion from 'int' to 'const char*' [-fpermissive]
     out = num;
           ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:100:11: note: candidate: arduino::String& arduino::String::operator=(const arduino::__FlashStringHelper*) <near match>
  String & operator = (const __FlashStringHelper *str);
           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:100:11: note:   conversion of argument 1 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:463:11: error: invalid conversion from 'int' to 'const arduino::__FlashStringHelper*' [-fpermissive]
     out = num;
           ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:102:11: note: candidate: arduino::String& arduino::String::operator=(arduino::String&&) <near match>
  String & operator = (String &&rval);
           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:102:11: note:   conversion of argument 1 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:463:11: error: conversion from 'int' to 'arduino::String' is ambiguous
     out = num;
           ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:74:2: note: candidate: arduino::String::String(const arduino::__FlashStringHelper*) <near match>
  String(const __FlashStringHelper *str);
  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:74:2: note:   conversion of argument 1 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:463:11: error: invalid conversion from 'int' to 'const arduino::__FlashStringHelper*' [-fpermissive]
     out = num;
           ^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/IPAddress.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:20:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/String.h:70:2: note: candidate: arduino::String::String(const char*) <near match>
  String(const char *cstr = "");
  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hard

examples/test_ublox_gps

Result: FAIL

WARNING: library Sodaq_UBlox_GPS claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:45:18: error: 'LED_RED' was not declared in this scope
     digitalWrite(LED_RED, HIGH);
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:45:18: note: suggested alternative: 'LEDR'
     digitalWrite(LED_RED, HIGH);
                  ^~~~~~~
                  LEDR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:47:18: error: 'LED_GREEN' was not declared in this scope
     digitalWrite(LED_GREEN, HIGH);
                  ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:47:18: note: suggested alternative: 'MEM_FREE'
     digitalWrite(LED_GREEN, HIGH);
                  ^~~~~~~~~
                  MEM_FREE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:49:18: error: 'LED_BLUE' was not declared in this scope
     digitalWrite(LED_BLUE, HIGH);
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:49:18: note: suggested alternative: 'LEDB'
     digitalWrite(LED_BLUE, HIGH);
                  ^~~~~~~~
                  LEDB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:58:20: error: 'GPS_ENABLE' was not declared in this scope
     sodaq_gps.init(GPS_ENABLE);
                    ^~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library Sodaq_UBlox_GPS claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3822 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 370 bytes (6%) of dynamic memory, leaving 5774 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:21:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t Sodaq_UBlox_GPS::read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/test_ublox_gps

Result: FAIL

WARNING: library Sodaq_UBlox_GPS claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:39:13: error: 'SerialUSB' was not declared in this scope
     while (!SerialUSB) {
             ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:39:13: note: suggested alternative: 'Serial1'
     while (!SerialUSB) {
             ^~~~~~~~~
             Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:45:18: error: 'LED_RED' was not declared in this scope
     digitalWrite(LED_RED, HIGH);
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:47:18: error: 'LED_GREEN' was not declared in this scope
     digitalWrite(LED_GREEN, HIGH);
                  ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:49:18: error: 'LED_BLUE' was not declared in this scope
     digitalWrite(LED_BLUE, HIGH);
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:49:18: note: suggested alternative: 'LED_BUILTIN'
     digitalWrite(LED_BLUE, HIGH);
                  ^~~~~~~~
                  LED_BUILTIN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:58:20: error: 'GPS_ENABLE' was not declared in this scope
     sodaq_gps.init(GPS_ENABLE);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:58:20: note: suggested alternative: 'SPI_ENABLE_bm'
     sodaq_gps.init(GPS_ENABLE);
                    ^~~~~~~~~~
                    SPI_ENABLE_bm

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13696 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3652 bytes (11%) of dynamic memory, leaving 29116 bytes for local variables. Maximum is 32768 bytes.

examples/test_ublox_gps

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:45:18: error: 'LED_RED' was not declared in this scope
     digitalWrite(LED_RED, HIGH);
                  ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:47:18: error: 'LED_GREEN' was not declared in this scope
     digitalWrite(LED_GREEN, HIGH);
                  ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:49:18: error: 'LED_BLUE' was not declared in this scope
     digitalWrite(LED_BLUE, HIGH);
                  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:58:20: error: 'GPS_ENABLE' was not declared in this scope
     sodaq_gps.init(GPS_ENABLE);
                    ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:58:20: note: suggested alternative: 'CDC_ENABLED'
     sodaq_gps.init(GPS_ENABLE);
                    ^~~~~~~~~~
                    CDC_ENABLED

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library Sodaq_UBlox_GPS claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 203142 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13960 bytes (4%) of dynamic memory, leaving 313720 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/src/Sodaq_UBlox_GPS.cpp:21:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'uint8_t Sodaq_UBlox_GPS::read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:100:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t, uint8_t)
     uint8_t requestFrom(uint8_t address, uint8_t size, uint8_t sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/test_ublox_gps

Result: FAIL

WARNING: library Sodaq_UBlox_GPS claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:39:13: error: 'SerialUSB' was not declared in this scope
     while (!SerialUSB) {
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:5:25: error: 'SERIAL_PORT_MONITOR' was not declared in this scope
 #define MySerial        SERIAL_PORT_MONITOR
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:43:5: note: in expansion of macro 'MySerial'
     MySerial.begin(57600);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:45:18: error: 'LED_RED' was not declared in this scope
     digitalWrite(LED_RED, HIGH);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:47:18: error: 'LED_GREEN' was not declared in this scope
     digitalWrite(LED_GREEN, HIGH);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:49:18: error: 'LED_BLUE' was not declared in this scope
     digitalWrite(LED_BLUE, HIGH);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:58:20: error: 'GPS_ENABLE' was not declared in this scope
     sodaq_gps.init(GPS_ENABLE);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino: In function 'void find_fix(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:5:25: error: 'SERIAL_PORT_MONITOR' was not declared in this scope
 #define MySerial        SERIAL_PORT_MONITOR
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Sodaq_UBlox_GPS/examples/test_ublox_gps/test_ublox_gps.ino:85:5: note: in expansion of macro 'MySerial'
     MySerial.println(String("delay ... ") + delay_until + String("ms"));
     ^