Somfy_Remote_Lib - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Somfy_Remote_Lib

Version: 0.4.1
More details

Compatibility matrix

Board Claims compatibility Inclusion 
MultipleRemotes
 
SomfyRemote
 
CC1101
 
ESP32-NVS
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No ⚠️ PASS PASS PASS PASS FAIL
arduino:samd:mkrwifi1010
1.8.12 		No FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes PASS PASS PASS PASS PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/CC1101

Result: PASS 

Sketch uses 9010 bytes (27%) of program storage space. Maximum is 32256 bytes.
Global variables use 276 bytes (13%) of dynamic memory, leaving 1772 bytes for local variables. Maximum is 2048 bytes.

examples/ESP32-NVS

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/ESP32-NVS/ESP32-NVS.ino:9:1: error: 'NVSRollingCodeStorage' does not name a type; did you mean 'RollingCodeStorage'?
 NVSRollingCodeStorage rollingCodeStorage(NVS_NAME, NVS_KEY);
 ^~~~~~~~~~~~~~~~~~~~~
 RollingCodeStorage
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/ESP32-NVS/ESP32-NVS.ino:10:48: error: 'rollingCodeStorage' was not declared in this scope
 SomfyRemote somfyRemote(EMITTER_GPIO, REMOTE, &rollingCodeStorage);
                                                ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/ESP32-NVS/ESP32-NVS.ino:10:48: note: suggested alternative: 'RollingCodeStorage'
 SomfyRemote somfyRemote(EMITTER_GPIO, REMOTE, &rollingCodeStorage);
                                                ^~~~~~~~~~~~~~~~~~
                                                RollingCodeStorage
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/MultipleRemotes

Result: PASS 

Sketch uses 5788 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 282 bytes (13%) of dynamic memory, leaving 1766 bytes for local variables. Maximum is 2048 bytes.

examples/SomfyRemote

Result: PASS 

Sketch uses 5516 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 249 bytes (12%) of dynamic memory, leaving 1799 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/src/EEPROMRollingCodeStorage.h:4:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/src/EEPROMRollingCodeStorage.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/CC1101

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/CC1101/CC1101.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/ESP32-NVS

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/src/EEPROMRollingCodeStorage.h:4:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/src/EEPROMRollingCodeStorage.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/MultipleRemotes

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/MultipleRemotes/MultipleRemotes.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/SomfyRemote

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/SomfyRemote/SomfyRemote.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS 

WARNING: library Somfy_Remote_Lib claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 2614 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.

examples/CC1101

Result: PASS 

WARNING: library Somfy_Remote_Lib claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library SmartRC-CC1101-Driver-Lib claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 11125 bytes (22%) of program storage space. Maximum is 49152 bytes.
Global variables use 301 bytes (4%) of dynamic memory, leaving 5843 bytes for local variables. Maximum is 6144 bytes.

examples/ESP32-NVS

Result: FAIL 

WARNING: library Somfy_Remote_Lib claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/ESP32-NVS/ESP32-NVS.ino:9:1: error: 'NVSRollingCodeStorage' does not name a type; did you mean 'RollingCodeStorage'?
 NVSRollingCodeStorage rollingCodeStorage(NVS_NAME, NVS_KEY);
 ^~~~~~~~~~~~~~~~~~~~~
 RollingCodeStorage
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/ESP32-NVS/ESP32-NVS.ino:10:48: error: 'rollingCodeStorage' was not declared in this scope
 SomfyRemote somfyRemote(EMITTER_GPIO, REMOTE, &rollingCodeStorage);
                                                ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/ESP32-NVS/ESP32-NVS.ino:10:48: note: suggested alternative: 'RollingCodeStorage'
 SomfyRemote somfyRemote(EMITTER_GPIO, REMOTE, &rollingCodeStorage);
                                                ^~~~~~~~~~~~~~~~~~
                                                RollingCodeStorage
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/MultipleRemotes

Result: PASS 

WARNING: library Somfy_Remote_Lib claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 6291 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 233 bytes (3%) of dynamic memory, leaving 5911 bytes for local variables. Maximum is 6144 bytes.

examples/SomfyRemote

Result: PASS 

WARNING: library Somfy_Remote_Lib claims to run on avr, esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 6091 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 200 bytes (3%) of dynamic memory, leaving 5944 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/src/EEPROMRollingCodeStorage.h:4:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/src/EEPROMRollingCodeStorage.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/CC1101

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/CC1101/CC1101.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/ESP32-NVS

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/src/EEPROMRollingCodeStorage.h:4:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/src/EEPROMRollingCodeStorage.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/MultipleRemotes

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/MultipleRemotes/MultipleRemotes.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/SomfyRemote

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Somfy_Remote_Lib/examples/SomfyRemote/SomfyRemote.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
 #include <avr/eeprom.h>
          ^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS 

Sketch uses 205118 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13256 bytes (4%) of dynamic memory, leaving 314424 bytes for local variables. Maximum is 327680 bytes.

examples/CC1101

Result: PASS 

Sketch uses 221702 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13672 bytes (4%) of dynamic memory, leaving 314008 bytes for local variables. Maximum is 327680 bytes.

examples/ESP32-NVS

Result: PASS 

Sketch uses 213646 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13512 bytes (4%) of dynamic memory, leaving 314168 bytes for local variables. Maximum is 327680 bytes.

examples/MultipleRemotes

Result: PASS 

Sketch uses 213838 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13568 bytes (4%) of dynamic memory, leaving 314112 bytes for local variables. Maximum is 327680 bytes.

examples/SomfyRemote

Result: PASS 

Sketch uses 213702 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13504 bytes (4%) of dynamic memory, leaving 314176 bytes for local variables. Maximum is 327680 bytes.