This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.3.0
More details
| Board | Claims compatibility | Inclusion | Example3_Verify |
Example4_Alice |
Example4_Bob |
Example5_Random |
Example7_Hash |
Example2_Sign |
Example6_Challenge_Alice |
Example6_Challenge_Bob |
Example1_Configuration |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: FAIL
In file included from /tmp/arduino-testlib1937743544/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example1_Configuration/Example1_Configuration.ino:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example1_Configuration/Example1_Configuration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example1_Configuration/Example1_Configuration.ino:34:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example2_Sign/Example2_Sign.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example2_Sign/Example2_Sign.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example2_Sign/Example2_Sign.ino:39:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example3_Verify/Example3_Verify.ino:32:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example3_Verify/Example3_Verify.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example3_Verify/Example3_Verify.ino:65:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Alice/Example4_Alice.ino:72:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Alice/Example4_Alice.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Alice/Example4_Alice.ino:86:3: error: 'Serial1' was not declared in this scope
Serial1.begin(115200); // Alice's TX1 pin -->> Bob's RX1 pin
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Alice/Example4_Alice.ino:86:3: note: suggested alternative: 'Serial'
Serial1.begin(115200); // Alice's TX1 pin -->> Bob's RX1 pin
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Alice/Example4_Alice.ino:88:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino:72:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino:96:3: error: 'Serial1' was not declared in this scope
Serial1.begin(115200); // Alice's TX1 pin -->> Bob's RX1 pin
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino:96:3: note: suggested alternative: 'Serial'
Serial1.begin(115200); // Alice's TX1 pin -->> Bob's RX1 pin
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino:98:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino:123:7: error: 'Serial1' was not declared in this scope
if (Serial1.available() > 0) // listen on Serial1
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino:123:7: note: suggested alternative: 'Serial'
if (Serial1.available() > 0) // listen on Serial1
^~~~~~~
Serial
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example5_Random/Example5_Random.ino:56:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example5_Random/Example5_Random.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example5_Random/Example5_Random.ino:64:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Alice/Example6_Challenge_Alice.ino:80:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Alice/Example6_Challenge_Alice.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Alice/Example6_Challenge_Alice.ino:92:3: error: 'Serial1' was not declared in this scope
Serial1.begin(115200); // Alice's TX1/RX1 <<-->> Bob's TX1/RX1
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Alice/Example6_Challenge_Alice.ino:92:3: note: suggested alternative: 'Serial'
Serial1.begin(115200); // Alice's TX1/RX1 <<-->> Bob's TX1/RX1
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Alice/Example6_Challenge_Alice.ino:94:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino:80:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino:105:3: error: 'Serial1' was not declared in this scope
Serial1.begin(115200); // Alice's TX1/RX1 <<-->> Bob's TX1/RX1
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino:105:3: note: suggested alternative: 'Serial'
Serial1.begin(115200); // Alice's TX1/RX1 <<-->> Bob's TX1/RX1
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino:107:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino:132:7: error: 'Serial1' was not declared in this scope
if (Serial1.available() > 0) // listen on Serial1
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino:132:7: note: suggested alternative: 'Serial'
if (Serial1.available() > 0) // listen on Serial1
^~~~~~~
Serial
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example7_Hash/Example7_Hash.ino:37:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example7_Hash/Example7_Hash.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example7_Hash/Example7_Hash.ino:70:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: PASS
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84602 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44740 bytes (16%) of dynamic memory, leaving 225596 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84476 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44772 bytes (16%) of dynamic memory, leaving 225564 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84328 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44900 bytes (16%) of dynamic memory, leaving 225436 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84788 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44772 bytes (16%) of dynamic memory, leaving 225564 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84794 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44904 bytes (16%) of dynamic memory, leaving 225432 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 85952 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44740 bytes (16%) of dynamic memory, leaving 225596 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84840 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44772 bytes (16%) of dynamic memory, leaving 225564 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 85110 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44904 bytes (16%) of dynamic memory, leaving 225432 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84482 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44804 bytes (16%) of dynamic memory, leaving 225532 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
In file included from /tmp/arduino-testlib3378728140/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example1_Configuration/Example1_Configuration.ino:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example1_Configuration/Example1_Configuration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example1_Configuration/Example1_Configuration.ino:34:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example2_Sign/Example2_Sign.ino:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example2_Sign/Example2_Sign.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example2_Sign/Example2_Sign.ino:39:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example3_Verify/Example3_Verify.ino:32:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example3_Verify/Example3_Verify.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example3_Verify/Example3_Verify.ino:65:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Alice/Example4_Alice.ino:72:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Alice/Example4_Alice.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Alice/Example4_Alice.ino:88:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino:72:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example4_Bob/Example4_Bob.ino:98:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example5_Random/Example5_Random.ino:56:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example5_Random/Example5_Random.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example5_Random/Example5_Random.ino:64:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Alice/Example6_Challenge_Alice.ino:80:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Alice/Example6_Challenge_Alice.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Alice/Example6_Challenge_Alice.ino:94:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino:80:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example6_Challenge_Bob/Example6_Challenge_Bob.ino:107:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example7_Hash/Example7_Hash.ino:37:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: error: 'SerialUSB' was not declared in this scope
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/src/SparkFun_ATECCX08a_Arduino_Library.h:197:108: note: suggested alternative: 'Serial1'
boolean begin(uint8_t i2caddr = ATECC508A_ADDRESS_DEFAULT, TwoWire &wirePort = Wire, Stream &serialPort = SerialUSB); // SamD21 boards
^~~~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example7_Hash/Example7_Hash.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_ATECCX08a_Arduino_Library/examples/Example7_Hash/Example7_Hash.ino:70:19: error: call to 'boolean ATECCX08A::begin(uint8_t, TwoWire&, arduino::Stream&)' uses the default argument for parameter 3, which is not yet defined
if (atecc.begin() == true)
^
Result: PASS
Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17560 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4084 bytes (12%) of dynamic memory, leaving 28684 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17076 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4116 bytes (12%) of dynamic memory, leaving 28652 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 16992 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4244 bytes (12%) of dynamic memory, leaving 28524 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17668 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4116 bytes (12%) of dynamic memory, leaving 28652 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17576 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4248 bytes (12%) of dynamic memory, leaving 28520 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 18696 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 4084 bytes (12%) of dynamic memory, leaving 28684 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17776 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4116 bytes (12%) of dynamic memory, leaving 28652 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 18008 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4248 bytes (12%) of dynamic memory, leaving 28520 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 17116 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 4148 bytes (12%) of dynamic memory, leaving 28620 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 203114 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217662 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14648 bytes (4%) of dynamic memory, leaving 313032 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217142 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14680 bytes (4%) of dynamic memory, leaving 313000 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217074 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14808 bytes (4%) of dynamic memory, leaving 312872 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217770 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14680 bytes (4%) of dynamic memory, leaving 313000 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217694 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14816 bytes (4%) of dynamic memory, leaving 312864 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216962 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14648 bytes (4%) of dynamic memory, leaving 313032 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217914 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14680 bytes (4%) of dynamic memory, leaving 313000 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 218126 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14816 bytes (4%) of dynamic memory, leaving 312864 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217218 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14712 bytes (4%) of dynamic memory, leaving 312968 bytes for local variables. Maximum is 327680 bytes.