This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 2.0.1
More details
| Board | Claims compatibility | Inclusion | Example8_Core |
Example9_AdvancedBegin |
Example4_SetBaseline |
Example6_TwentyMinuteTest |
Example7_SensitivityDemo |
Example5_WakeAndInterrupt |
Example1_BasicReadings |
Example2_BME280Compensation |
Example3_ThermistorCompensation |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | FAIL | FAIL | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5212 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 523 bytes (25%) of dynamic memory, leaving 1525 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 13710 bytes (42%) of program storage space. Maximum is 32256 bytes. Global variables use 1003 bytes (48%) of dynamic memory, leaving 1045 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8248 bytes (25%) of program storage space. Maximum is 32256 bytes. Global variables use 853 bytes (41%) of dynamic memory, leaving 1195 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6404 bytes (19%) of program storage space. Maximum is 32256 bytes. Global variables use 991 bytes (48%) of dynamic memory, leaving 1057 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5814 bytes (18%) of program storage space. Maximum is 32256 bytes. Global variables use 639 bytes (31%) of dynamic memory, leaving 1409 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7276 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 747 bytes (36%) of dynamic memory, leaving 1301 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8400 bytes (26%) of program storage space. Maximum is 32256 bytes. Global variables use 863 bytes (42%) of dynamic memory, leaving 1185 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4920 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 483 bytes (23%) of dynamic memory, leaving 1565 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino:54:3: error: 'Wire1' was not declared in this scope Wire1.begin(); //Compilation will fail here if your hardware doesn't support additional Wire ports ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino:54:3: note: suggested alternative: 'Wire' Wire1.begin(); //Compilation will fail here if your hardware doesn't support additional Wire ports ^~~~~ Wire
Result: PASS
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82762 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 97236 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44500 bytes (16%) of dynamic memory, leaving 225836 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 88438 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example4_SetBaseline/Example4_SetBaseline.ino:54:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: PASS
Sketch uses 83230 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 83170 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 86900 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82454 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino:54:3: error: 'Wire1' was not declared in this scope Wire1.begin(); //Compilation will fail here if your hardware doesn't support additional Wire ports ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino:54:3: note: suggested alternative: 'Wire' Wire1.begin(); //Compilation will fail here if your hardware doesn't support additional Wire ports ^~~~~ Wire
Result: PASS
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 6190 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 507 bytes (8%) of dynamic memory, leaving 5637 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 16983 bytes (34%) of program storage space. Maximum is 49152 bytes.
Global variables use 656 bytes (10%) of dynamic memory, leaving 5488 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_BME280/src/SparkFunBME280.h:39:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_BME280/src/SparkFunBME280.cpp:24:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void BME280::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t BME280::readRegister(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 9188 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 507 bytes (8%) of dynamic memory, leaving 5637 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 7392 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 507 bytes (8%) of dynamic memory, leaving 5637 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 6687 bytes (13%) of program storage space. Maximum is 49152 bytes.
Global variables use 507 bytes (8%) of dynamic memory, leaving 5637 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 8244 bytes (16%) of program storage space. Maximum is 49152 bytes.
Global variables use 507 bytes (8%) of dynamic memory, leaving 5637 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 9193 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 519 bytes (8%) of dynamic memory, leaving 5625 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 5839 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 487 bytes (7%) of dynamic memory, leaving 5657 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:31:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino:54:3: error: 'Wire1' was not declared in this scope Wire1.begin(); //Compilation will fail here if your hardware doesn't support additional Wire ports ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino:54:3: note: suggested alternative: 'Wire' Wire1.begin(); //Compilation will fail here if your hardware doesn't support additional Wire ports ^~~~~ Wire
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:28: error: 'TwoWire' has not been declared
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:93:2: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:13: error: 'TwoWire' has not been declared
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:34: error: 'TwoWire' has not been declared
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:33: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:54: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:47:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811Core::beginCore(arduino::TwoWire&)' does not match any in class 'CCS811Core'
CCS811Core::CCS811_Status_e CCS811Core::beginCore(TwoWire &wirePort)
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811Core::beginCore(int&)
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::writeRegister(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiWriteRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:244:6: error: prototype for 'bool CCS811::begin(arduino::TwoWire&)' does not match any in class 'CCS811'
bool CCS811::begin(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:7: error: candidate is: bool CCS811::begin(int&)
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:258:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811::beginWithStatus(arduino::TwoWire&)' does not match any in class 'CCS811'
CCS811Core::CCS811_Status_e CCS811::beginWithStatus(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811::beginWithStatus(int&)
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:28: error: 'TwoWire' has not been declared
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:93:2: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:13: error: 'TwoWire' has not been declared
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:34: error: 'TwoWire' has not been declared
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:33: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:54: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:47:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811Core::beginCore(arduino::TwoWire&)' does not match any in class 'CCS811Core'
CCS811Core::CCS811_Status_e CCS811Core::beginCore(TwoWire &wirePort)
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811Core::beginCore(int&)
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::writeRegister(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiWriteRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:244:6: error: prototype for 'bool CCS811::begin(arduino::TwoWire&)' does not match any in class 'CCS811'
bool CCS811::begin(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:7: error: candidate is: bool CCS811::begin(int&)
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:258:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811::beginWithStatus(arduino::TwoWire&)' does not match any in class 'CCS811'
CCS811Core::CCS811_Status_e CCS811::beginWithStatus(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811::beginWithStatus(int&)
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:28: error: 'TwoWire' has not been declared
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:93:2: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:13: error: 'TwoWire' has not been declared
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:34: error: 'TwoWire' has not been declared
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:33: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:54: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:47:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811Core::beginCore(arduino::TwoWire&)' does not match any in class 'CCS811Core'
CCS811Core::CCS811_Status_e CCS811Core::beginCore(TwoWire &wirePort)
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811Core::beginCore(int&)
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::writeRegister(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiWriteRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:244:6: error: prototype for 'bool CCS811::begin(arduino::TwoWire&)' does not match any in class 'CCS811'
bool CCS811::begin(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:7: error: candidate is: bool CCS811::begin(int&)
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:258:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811::beginWithStatus(arduino::TwoWire&)' does not match any in class 'CCS811'
CCS811Core::CCS811_Status_e CCS811::beginWithStatus(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811::beginWithStatus(int&)
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:28: error: 'TwoWire' has not been declared
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:93:2: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:13: error: 'TwoWire' has not been declared
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:34: error: 'TwoWire' has not been declared
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:33: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:54: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:47:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811Core::beginCore(arduino::TwoWire&)' does not match any in class 'CCS811Core'
CCS811Core::CCS811_Status_e CCS811Core::beginCore(TwoWire &wirePort)
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811Core::beginCore(int&)
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::writeRegister(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiWriteRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:244:6: error: prototype for 'bool CCS811::begin(arduino::TwoWire&)' does not match any in class 'CCS811'
bool CCS811::begin(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:7: error: candidate is: bool CCS811::begin(int&)
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:258:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811::beginWithStatus(arduino::TwoWire&)' does not match any in class 'CCS811'
CCS811Core::CCS811_Status_e CCS811::beginWithStatus(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811::beginWithStatus(int&)
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example4_SetBaseline/Example4_SetBaseline.ino:54:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum/src/EEPROM.h:25:10: fatal error: avr/eeprom.h: No such file or directory
#include <avr/eeprom.h>
^~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "EEPROM.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:28: error: 'TwoWire' has not been declared
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:93:2: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:13: error: 'TwoWire' has not been declared
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:34: error: 'TwoWire' has not been declared
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:33: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:54: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:47:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811Core::beginCore(arduino::TwoWire&)' does not match any in class 'CCS811Core'
CCS811Core::CCS811_Status_e CCS811Core::beginCore(TwoWire &wirePort)
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811Core::beginCore(int&)
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::writeRegister(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiWriteRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:244:6: error: prototype for 'bool CCS811::begin(arduino::TwoWire&)' does not match any in class 'CCS811'
bool CCS811::begin(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:7: error: candidate is: bool CCS811::begin(int&)
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:258:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811::beginWithStatus(arduino::TwoWire&)' does not match any in class 'CCS811'
CCS811Core::CCS811_Status_e CCS811::beginWithStatus(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811::beginWithStatus(int&)
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:28: error: 'TwoWire' has not been declared
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:93:2: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:13: error: 'TwoWire' has not been declared
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:34: error: 'TwoWire' has not been declared
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:33: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:54: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:47:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811Core::beginCore(arduino::TwoWire&)' does not match any in class 'CCS811Core'
CCS811Core::CCS811_Status_e CCS811Core::beginCore(TwoWire &wirePort)
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811Core::beginCore(int&)
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::writeRegister(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiWriteRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:244:6: error: prototype for 'bool CCS811::begin(arduino::TwoWire&)' does not match any in class 'CCS811'
bool CCS811::begin(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:7: error: candidate is: bool CCS811::begin(int&)
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:258:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811::beginWithStatus(arduino::TwoWire&)' does not match any in class 'CCS811'
CCS811Core::CCS811_Status_e CCS811::beginWithStatus(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811::beginWithStatus(int&)
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:28: error: 'TwoWire' has not been declared
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:93:2: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:13: error: 'TwoWire' has not been declared
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:34: error: 'TwoWire' has not been declared
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:33: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:54: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:47:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811Core::beginCore(arduino::TwoWire&)' does not match any in class 'CCS811Core'
CCS811Core::CCS811_Status_e CCS811Core::beginCore(TwoWire &wirePort)
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811Core::beginCore(int&)
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::writeRegister(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiWriteRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:244:6: error: prototype for 'bool CCS811::begin(arduino::TwoWire&)' does not match any in class 'CCS811'
bool CCS811::begin(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:7: error: candidate is: bool CCS811::begin(int&)
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:258:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811::beginWithStatus(arduino::TwoWire&)' does not match any in class 'CCS811'
CCS811Core::CCS811_Status_e CCS811::beginWithStatus(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811::beginWithStatus(int&)
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~~~~~~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:28: error: 'TwoWire' has not been declared
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:93:2: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:13: error: 'TwoWire' has not been declared
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:34: error: 'TwoWire' has not been declared
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:33: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:54: error: could not convert 'Wire' from 'arduino::TwoWire' to 'int&'
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:47:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811Core::beginCore(arduino::TwoWire&)' does not match any in class 'CCS811Core'
CCS811Core::CCS811_Status_e CCS811Core::beginCore(TwoWire &wirePort)
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:73:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811Core::beginCore(int&)
CCS811_Status_e beginCore(TwoWire &wirePort);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::readRegister(uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:104:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiReadRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:140:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::writeRegister(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:175:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: In member function 'CCS811Core::CCS811_Status_e CCS811Core::multiWriteRegister(uint8_t, uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: error: '_i2cPort' was not declared in this scope
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:206:2: note: suggested alternative: 'Port'
_i2cPort->beginTransmission(I2CAddress);
^~~~~~~~
Port
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:244:6: error: prototype for 'bool CCS811::begin(arduino::TwoWire&)' does not match any in class 'CCS811'
bool CCS811::begin(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:108:7: error: candidate is: bool CCS811::begin(int&)
bool begin(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:258:29: error: prototype for 'CCS811Core::CCS811_Status_e CCS811::beginWithStatus(arduino::TwoWire&)' does not match any in class 'CCS811'
CCS811Core::CCS811_Status_e CCS811::beginWithStatus(TwoWire &wirePort)
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.cpp:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/src/SparkFunCCS811.h:109:18: error: candidate is: CCS811Core::CCS811_Status_e CCS811::beginWithStatus(int&)
CCS811_Status_e beginWithStatus(TwoWire &wirePort = Wire); //Use the Wire hardware by default
^~~~~~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino:54:3: error: 'Wire1' was not declared in this scope Wire1.begin(); //Compilation will fail here if your hardware doesn't support additional Wire ports ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_CCS811_Arduino_Library/examples/Example9_AdvancedBegin/Example9_AdvancedBegin.ino:54:3: note: suggested alternative: 'Wire' Wire1.begin(); //Compilation will fail here if your hardware doesn't support additional Wire ports ^~~~~ Wire
Result: PASS
Sketch uses 202826 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 214578 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 227150 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14336 bytes (4%) of dynamic memory, leaving 313344 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217626 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 220230 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14208 bytes (4%) of dynamic memory, leaving 313472 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 214994 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215398 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216106 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 214330 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 214674 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.