SparkFun LIS3DH Arduino Library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

SparkFun LIS3DH Arduino Library

Version: 1.0.3
More details

Compatibility matrix

Board Claims compatibility Inclusion 
LowLevelExample
 
MinimalistExample
 
MultiI2C
 
MultiSPI
 
ADCUsage
 
FifoExample
 
FullSettingExample
 
IntUsage
arduino:avr:uno
1.8.4 		Yes PASS FAIL PASS PASS PASS PASS PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		Yes PASS FAIL PASS PASS PASS PASS PASS PASS PASS
arduino:samd:mkrwifi1010
1.8.12 		Yes PASS FAIL PASS PASS PASS PASS PASS PASS PASS
esp32:esp32:d1_mini32
1.0.6 		Yes PASS FAIL PASS PASS PASS PASS PASS PASS PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/ADCUsage

Result: PASS 

Sketch uses 5540 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 485 bytes (23%) of dynamic memory, leaving 1563 bytes for local variables. Maximum is 2048 bytes.

examples/FifoExample

Result: PASS 

Sketch uses 7806 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 553 bytes (27%) of dynamic memory, leaving 1495 bytes for local variables. Maximum is 2048 bytes.

examples/FullSettingExample

Result: PASS 

Sketch uses 7286 bytes (22%) of program storage space. Maximum is 32256 bytes.
Global variables use 507 bytes (24%) of dynamic memory, leaving 1541 bytes for local variables. Maximum is 2048 bytes.

examples/IntUsage

Result: PASS 

Sketch uses 5516 bytes (17%) of program storage space. Maximum is 32256 bytes.
Global variables use 551 bytes (26%) of dynamic memory, leaving 1497 bytes for local variables. Maximum is 2048 bytes.

examples/LowLevelExample

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: error: 'LIS3DH_INT1_SOURCE' was not declared in this scope
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: note: suggested alternative: 'LIS3DH_INT1_SRC'
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^~~~~~~~~~~~~~~~~~
                                 LIS3DH_INT1_SRC

examples/MinimalistExample

Result: PASS 

Sketch uses 7246 bytes (22%) of program storage space. Maximum is 32256 bytes.
Global variables use 507 bytes (24%) of dynamic memory, leaving 1541 bytes for local variables. Maximum is 2048 bytes.

examples/MultiI2C

Result: PASS 

Sketch uses 7924 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 765 bytes (37%) of dynamic memory, leaving 1283 bytes for local variables. Maximum is 2048 bytes.

examples/MultiSPI

Result: PASS 

Sketch uses 7962 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 799 bytes (39%) of dynamic memory, leaving 1249 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created. 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp: In member function 'status_t LIS3DHCore::beginCore()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:117:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:122:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/ADCUsage

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp: In member function 'status_t LIS3DHCore::beginCore()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:117:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:122:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/FifoExample

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp: In member function 'status_t LIS3DHCore::beginCore()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:117:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:122:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/FullSettingExample

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp: In member function 'status_t LIS3DHCore::beginCore()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:117:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:122:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/IntUsage

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp: In member function 'status_t LIS3DHCore::beginCore()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:117:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:122:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/LowLevelExample

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: error: 'LIS3DH_INT1_SOURCE' was not declared in this scope
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: note: suggested alternative: 'LIS3DH_INT1_SRC'
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^~~~~~~~~~~~~~~~~~
                                 LIS3DH_INT1_SRC

examples/MinimalistExample

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp: In member function 'status_t LIS3DHCore::beginCore()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:117:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:122:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/MultiI2C

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp: In member function 'status_t LIS3DHCore::beginCore()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:117:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:122:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

examples/MultiSPI

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp: In member function 'status_t LIS3DHCore::beginCore()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:7: error: 'class arduino::MbedSPI' has no member named 'setClockDivider'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
       ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: error: 'SPI_CLOCK_DIV4' was not declared in this scope
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:115:23: note: suggested alternative: 'SPI_CPOL_1'
   SPI.setClockDivider(SPI_CLOCK_DIV4);
                       ^~~~~~~~~~~~~~
                       SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:117:7: error: 'class arduino::MbedSPI' has no member named 'setBitOrder'
   SPI.setBitOrder(MSBFIRST);
       ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:122:7: error: 'class arduino::MbedSPI' has no member named 'setDataMode'
   SPI.setDataMode(SPI_MODE3);
       ^~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegister(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/ADCUsage

Result: PASS 

Sketch uses 8671 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 586 bytes (9%) of dynamic memory, leaving 5558 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegister(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/FifoExample

Result: PASS 

Sketch uses 10883 bytes (22%) of program storage space. Maximum is 49152 bytes.
Global variables use 590 bytes (9%) of dynamic memory, leaving 5554 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegister(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/FullSettingExample

Result: PASS 

Sketch uses 10401 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 586 bytes (9%) of dynamic memory, leaving 5558 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegister(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/IntUsage

Result: PASS 

Sketch uses 8700 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 586 bytes (9%) of dynamic memory, leaving 5558 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegister(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/LowLevelExample

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: error: 'LIS3DH_INT1_SOURCE' was not declared in this scope
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: note: suggested alternative: 'LIS3DH_INT1_SRC'
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^~~~~~~~~~~~~~~~~~
                                 LIS3DH_INT1_SRC

examples/MinimalistExample

Result: PASS 

Sketch uses 10361 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 586 bytes (9%) of dynamic memory, leaving 5558 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegister(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/MultiI2C

Result: PASS 

Sketch uses 11047 bytes (22%) of program storage space. Maximum is 49152 bytes.
Global variables use 604 bytes (9%) of dynamic memory, leaving 5540 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegister(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/MultiSPI

Result: PASS 

Sketch uses 11067 bytes (22%) of program storage space. Maximum is 49152 bytes.
Global variables use 604 bytes (9%) of dynamic memory, leaving 5540 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/src/SparkFunLIS3DH.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegisterRegion(uint8_t*, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'status_t LIS3DHCore::readRegister(uint8_t*, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 14780 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3656 bytes (11%) of dynamic memory, leaving 29112 bytes for local variables. Maximum is 32768 bytes.

examples/ADCUsage

Result: PASS 

Sketch uses 16936 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3676 bytes (11%) of dynamic memory, leaving 29092 bytes for local variables. Maximum is 32768 bytes.

examples/FifoExample

Result: PASS 

Sketch uses 26056 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3680 bytes (11%) of dynamic memory, leaving 29088 bytes for local variables. Maximum is 32768 bytes.

examples/FullSettingExample

Result: PASS 

Sketch uses 25680 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3676 bytes (11%) of dynamic memory, leaving 29092 bytes for local variables. Maximum is 32768 bytes.

examples/IntUsage

Result: PASS 

Sketch uses 16920 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3676 bytes (11%) of dynamic memory, leaving 29092 bytes for local variables. Maximum is 32768 bytes.

examples/LowLevelExample

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: error: 'LIS3DH_INT1_SOURCE' was not declared in this scope
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: note: suggested alternative: 'LIS3DH_INT1_SRC'
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^~~~~~~~~~~~~~~~~~
                                 LIS3DH_INT1_SRC

examples/MinimalistExample

Result: PASS 

Sketch uses 25664 bytes (9%) of program storage space. Maximum is 262144 bytes.
Global variables use 3676 bytes (11%) of dynamic memory, leaving 29092 bytes for local variables. Maximum is 32768 bytes.

examples/MultiI2C

Result: PASS 

Sketch uses 26264 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3696 bytes (11%) of dynamic memory, leaving 29072 bytes for local variables. Maximum is 32768 bytes.

examples/MultiSPI

Result: PASS 

Sketch uses 26308 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3696 bytes (11%) of dynamic memory, leaving 29072 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 203474 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13904 bytes (4%) of dynamic memory, leaving 313776 bytes for local variables. Maximum is 327680 bytes.

examples/ADCUsage

Result: PASS 

Sketch uses 217290 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.

examples/FifoExample

Result: PASS 

Sketch uses 218338 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.

examples/FullSettingExample

Result: PASS 

Sketch uses 217954 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.

examples/IntUsage

Result: PASS 

Sketch uses 217302 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.

examples/LowLevelExample

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_LIS3DH_Arduino_Library/examples/LowLevelExample/LowLevelExample.ino:142:33: error: 'LIS3DH_INT1_SOURCE' was not declared in this scope
   myIMU.readRegister(&readData, LIS3DH_INT1_SOURCE);
                                 ^

examples/MinimalistExample

Result: PASS 

Sketch uses 217926 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.

examples/MultiI2C

Result: PASS 

Sketch uses 218470 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14240 bytes (4%) of dynamic memory, leaving 313440 bytes for local variables. Maximum is 327680 bytes.

examples/MultiSPI

Result: PASS 

Sketch uses 218518 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14240 bytes (4%) of dynamic memory, leaving 313440 bytes for local variables. Maximum is 327680 bytes.