This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.1
More details
| Board | Claims compatibility | Inclusion | Example4-DebugPrinting |
Example5-EEPROMWriting |
Example9-AlgorithmTest |
Example1-BasicReadings |
Example2-sensorTemperature |
Example3-BeginOptions |
|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 12248 bytes (37%) of program storage space. Maximum is 32256 bytes. Global variables use 524 bytes (25%) of dynamic memory, leaving 1524 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 12666 bytes (39%) of program storage space. Maximum is 32256 bytes. Global variables use 548 bytes (26%) of dynamic memory, leaving 1500 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: error: 'Wire1' was not declared in this scope Wire1.begin(); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: note: suggested alternative: 'Wire' Wire1.begin(); ^~~~~ Wire Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632
Result: PASS
Sketch uses 12306 bytes (38%) of program storage space. Maximum is 32256 bytes. Global variables use 524 bytes (25%) of dynamic memory, leaving 1524 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 9260 bytes (28%) of program storage space. Maximum is 32256 bytes. Global variables use 576 bytes (28%) of dynamic memory, leaving 1472 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5240 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 514 bytes (25%) of dynamic memory, leaving 1534 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 91720 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44360 bytes (16%) of dynamic memory, leaving 225976 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 91916 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44360 bytes (16%) of dynamic memory, leaving 225976 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: error: 'Wire1' was not declared in this scope Wire1.begin(); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: note: suggested alternative: 'Wire' Wire1.begin(); ^~~~~ Wire Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632
Result: PASS
Sketch uses 91792 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44360 bytes (16%) of dynamic memory, leaving 225976 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84358 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44344 bytes (16%) of dynamic memory, leaving 225992 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84810 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.h:36:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.cpp:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister16(uint16_t, uint16_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister32(uint16_t, uint32_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 13225 bytes (26%) of program storage space. Maximum is 49152 bytes.
Global variables use 546 bytes (8%) of dynamic memory, leaving 5598 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.h:36:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.cpp:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister16(uint16_t, uint16_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister32(uint16_t, uint32_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 13634 bytes (27%) of program storage space. Maximum is 49152 bytes.
Global variables use 546 bytes (8%) of dynamic memory, leaving 5598 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.h:36:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.cpp:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister16(uint16_t, uint16_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister32(uint16_t, uint32_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: error: 'Wire1' was not declared in this scope Wire1.begin(); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: note: suggested alternative: 'Wire' Wire1.begin(); ^~~~~ Wire Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632
Result: PASS
Sketch uses 13283 bytes (27%) of program storage space. Maximum is 49152 bytes.
Global variables use 546 bytes (8%) of dynamic memory, leaving 5598 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.h:36:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.cpp:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister16(uint16_t, uint16_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister32(uint16_t, uint32_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 10201 bytes (20%) of program storage space. Maximum is 49152 bytes.
Global variables use 542 bytes (8%) of dynamic memory, leaving 5602 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.h:36:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/src/SparkFun_MLX90632_Arduino_Library.cpp:55:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister16(uint16_t, uint16_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'MLX90632::status MLX90632::readRegister32(uint16_t, uint32_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 6359 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 31732 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3720 bytes (11%) of dynamic memory, leaving 29048 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 31956 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3720 bytes (11%) of dynamic memory, leaving 29048 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino: In function 'void setup()': /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: error: 'Wire1' was not declared in this scope Wire1.begin(); ^~~~~ /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor/examples/Example3-BeginOptions/Example3-BeginOptions.ino:32:3: note: suggested alternative: 'Wire' Wire1.begin(); ^~~~~ Wire Multiple libraries were found for "SparkFun_MLX90632_Arduino_Library.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MLX90632_Noncontact_Infrared_Temperature_Sensor Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EmotiBit_MLX90632
Result: PASS
Sketch uses 31804 bytes (12%) of program storage space. Maximum is 262144 bytes. Global variables use 3720 bytes (11%) of dynamic memory, leaving 29048 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 24092 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3688 bytes (11%) of dynamic memory, leaving 29080 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 26068 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 203042 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 223322 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14288 bytes (4%) of dynamic memory, leaving 313392 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 223578 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14288 bytes (4%) of dynamic memory, leaving 313392 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 223602 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14288 bytes (4%) of dynamic memory, leaving 313392 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 223410 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 14288 bytes (4%) of dynamic memory, leaving 313392 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216906 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14256 bytes (4%) of dynamic memory, leaving 313424 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 211038 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13416 bytes (4%) of dynamic memory, leaving 314264 bytes for local variables. Maximum is 327680 bytes.