This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.2.4
More details
| Board | Claims compatibility | Inclusion | SparkFunMPL3115A2AdvancedExample |
SparkFunPressure |
SparkFunPressure_Artemis |
SparkFunSimpleSketchMPL3115A2 |
SparkFunAltimeter |
SparkFunBarometricHgInch |
SparkFunMPL3115A2 |
|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | PASS | FAIL | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | PASS | FAIL | FAIL | PASS | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | PASS | FAIL | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | PASS | FAIL | FAIL | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | PASS |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 6758 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 443 bytes (21%) of dynamic memory, leaving 1605 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 7808 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 467 bytes (22%) of dynamic memory, leaving 1581 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 6088 bytes (18%) of program storage space. Maximum is 32256 bytes. Global variables use 494 bytes (24%) of dynamic memory, leaving 1554 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunMPL3115A2AdvancedExample/SparkFunMPL3115A2AdvancedExample.ino:55:10: fatal error: Adafruit_CharacterOLED.h: No such file or directory
#include <Adafruit_CharacterOLED.h> //include the OLED library to control LCD
^~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 6716 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 443 bytes (21%) of dynamic memory, leaving 1605 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:33:17: error: no matching function for call to 'TwoWire::TwoWire(int)'
TwoWire myWire(3); //Will use Artemis pads 42/43, SCL1/SDA1 on the Artemis Thing Plus
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note: candidate: TwoWire::TwoWire()
TwoWire();
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note: candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
class TwoWire : public Stream
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: no known conversion for argument 1 from 'int' to 'TwoWire&&'
Result: PASS
Sketch uses 9810 bytes (30%) of program storage space. Maximum is 32256 bytes.
Global variables use 630 bytes (30%) of dynamic memory, leaving 1418 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t, uint8_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 85364 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 91440 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 84148 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44224 bytes (16%) of dynamic memory, leaving 226112 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunMPL3115A2AdvancedExample/SparkFunMPL3115A2AdvancedExample.ino:54:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunMPL3115A2AdvancedExample/i2c.h:3:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 86060 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44232 bytes (16%) of dynamic memory, leaving 226104 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:33:17: error: no matching function for call to 'arduino::MbedI2C::MbedI2C(int)'
TwoWire myWire(3); //Will use Artemis pads 42/43, SCL1/SDA1 on the Artemis Thing Plus
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note: candidate: arduino::MbedI2C::MbedI2C(PinName, PinName)
MbedI2C(PinName sda, PinName scl);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note: candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note: candidate: arduino::MbedI2C::MbedI2C(int, int)
MbedI2C(int sda, int scl);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note: candidate expects 2 arguments, 1 provided
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: PASS
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 7720 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 487 bytes (7%) of dynamic memory, leaving 5657 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 8738 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 487 bytes (7%) of dynamic memory, leaving 5657 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 6966 bytes (14%) of program storage space. Maximum is 49152 bytes. Global variables use 488 bytes (7%) of dynamic memory, leaving 5656 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunMPL3115A2AdvancedExample/SparkFunMPL3115A2AdvancedExample.ino:55:10: fatal error: Adafruit_CharacterOLED.h: No such file or directory
#include <Adafruit_CharacterOLED.h> //include the OLED library to control LCD
^~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 7673 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 487 bytes (7%) of dynamic memory, leaving 5657 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:33:17: error: no matching function for call to 'TwoWire::TwoWire(int)'
TwoWire myWire(3); //Will use Artemis pads 42/43, SCL1/SDA1 on the Artemis Thing Plus
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note: candidate: TwoWire::TwoWire()
TwoWire();
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note: candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
class TwoWire : public HardwareI2C
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: no known conversion for argument 1 from 'int' to 'TwoWire&&'
Result: PASS
Sketch uses 11129 bytes (22%) of program storage space. Maximum is 49152 bytes.
Global variables use 802 bytes (13%) of dynamic memory, leaving 5342 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 24700 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3576 bytes (10%) of dynamic memory, leaving 29192 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 31052 bytes (11%) of program storage space. Maximum is 262144 bytes. Global variables use 3592 bytes (10%) of dynamic memory, leaving 29176 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 23564 bytes (8%) of program storage space. Maximum is 262144 bytes. Global variables use 3572 bytes (10%) of dynamic memory, leaving 29196 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunMPL3115A2AdvancedExample/SparkFunMPL3115A2AdvancedExample.ino:54:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunMPL3115A2AdvancedExample/i2c.h:3:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 25460 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3576 bytes (10%) of dynamic memory, leaving 29192 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:33:17: error: no matching function for call to 'arduino::TwoWire::TwoWire(int)'
TwoWire myWire(3); //Will use Artemis pads 42/43, SCL1/SDA1 on the Artemis Thing Plus
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note: candidate: arduino::TwoWire::TwoWire(SERCOM*, uint8_t, uint8_t)
TwoWire(SERCOM *s, uint8_t pinSDA, uint8_t pinSCL);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note: candidate expects 3 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(const arduino::TwoWire&)
class TwoWire : public HardwareI2C
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: no known conversion for argument 1 from 'int' to 'const arduino::TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(arduino::TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: no known conversion for argument 1 from 'int' to 'arduino::TwoWire&&'
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble/src/SoftwareSerial.cpp:45:10: fatal error: util/delay_basic.h: No such file or directory
#include <util/delay_basic.h>
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.h:24:15: error: 'STATUS' redeclared as different kind of symbol
STATUS = 0x00,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/esp_intr.h:18:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/driver/driver/touch_pad.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/esp_sleep.h:20,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/esp_system.h:21,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/esp32-hal.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:28,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:635:3: note: previous declaration 'typedef enum STATUS STATUS'
} STATUS;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp: In member function 'float MPL3115A2::readAltitude()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:64:25: error: expected primary-expression before ')' token
while( (IIC_Read(STATUS) & (1<<1)) == 0)
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int address, int size);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t address, uint8_t size);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp: In member function 'float MPL3115A2::readPressure()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:106:20: error: expected primary-expression before ')' token
if(IIC_Read(STATUS) & (1<<2) == 0) toggleOneShot(); //Toggle the OST bit causing the sensor to immediately take another reading
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:110:23: error: expected primary-expression before ')' token
while(IIC_Read(STATUS) & (1<<2) == 0)
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int address, int size);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t address, uint8_t size);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp: In member function 'float MPL3115A2::readTemp()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:146:20: error: expected primary-expression before ')' token
if(IIC_Read(STATUS) & (1<<1) == 0) toggleOneShot(); //Toggle the OST bit causing the sensor to immediately take another reading
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:150:25: error: expected primary-expression before ')' token
while( (IIC_Read(STATUS) & (1<<1)) == 0)
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.cpp:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int address, int size);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t address, uint8_t size);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'byte MPL3115A2::IIC_Read(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:103:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)
uint8_t requestFrom(int address, int size);
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:101:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)
uint8_t requestFrom(uint8_t address, uint8_t size);
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunAltimeter/SparkFunAltimeter.ino:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.h:24:15: error: 'STATUS' redeclared as different kind of symbol
STATUS = 0x00,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
from /tmp/arduino-sketch-D035E64B205A1E9615E91E9581B7B127/sketch/SparkFunAltimeter.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:635:3: note: previous declaration 'typedef enum STATUS STATUS'
} STATUS;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunBarometricHgInch/SparkFunBarometricHgInch.ino:26:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.h:24:15: error: 'STATUS' redeclared as different kind of symbol
STATUS = 0x00,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
from /tmp/arduino-sketch-7FB6F537249ED286338CF568AFEA20C4/sketch/SparkFunBarometricHgInch.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:635:3: note: previous declaration 'typedef enum STATUS STATUS'
} STATUS;
^
Result: PASS
Sketch uses 214390 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14128 bytes (4%) of dynamic memory, leaving 313552 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunMPL3115A2AdvancedExample/SparkFunMPL3115A2AdvancedExample.ino:54:0: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunMPL3115A2AdvancedExample/i2c.h:3:20: fatal error: avr/io.h: No such file or directory compilation terminated.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure/SparkFunPressure.ino:36:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.h:24:15: error: 'STATUS' redeclared as different kind of symbol
STATUS = 0x00,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
from /tmp/arduino-sketch-0C2474F73226D17E07DA3AAA979C3EEA/sketch/SparkFunPressure.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:635:3: note: previous declaration 'typedef enum STATUS STATUS'
} STATUS;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunPressure_Artemis/SparkFunPressure_Artemis.ino:29:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.h:24:15: error: 'STATUS' redeclared as different kind of symbol
STATUS = 0x00,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
from /tmp/arduino-sketch-5AAACE08EBAFB1B8E6D16AFCBF9FE079/sketch/SparkFunPressure_Artemis.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:635:3: note: previous declaration 'typedef enum STATUS STATUS'
} STATUS;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/examples/SparkFunSimpleSketchMPL3115A2/SparkFunSimpleSketchMPL3115A2.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SparkFun_MPL3115A2_Altitude_and_Pressure_Sensor_Breakout/src/SparkFunMPL3115A2.h:24:15: error: 'STATUS' redeclared as different kind of symbol
STATUS = 0x00,
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
from /tmp/arduino-sketch-6D1068DB9B38E44C1E285A7D428A3B36/sketch/SparkFunSimpleSketchMPL3115A2.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:635:3: note: previous declaration 'typedef enum STATUS STATUS'
} STATUS;
^
Multiple libraries were found for "SoftwareSerial.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/EspSoftwareSerial
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Dabble